How to make an ottoman from plastic bottles with your own hands

Making an ottoman from plastic bottles with your own hands is not such a strange idea, considering that plastic has long been used to make various pieces of furniture. Such products best complement the interior of the room and are suitable for connoisseurs of unusual, creative things.

Any beginner can handle making such an unusual ottoman, because its design is very simple. In this article we will look at several simple options for creating DIY products.

DIY ottoman made from plastic bottles

Useful tips

Before you begin the process of creating an item, you should study some recommendations:

1. First, you need to decide, or better yet, schematically display the design of the future ottoman. This will be required in order to calculate the exact amount of material (bottles). The more massive you plan to make the product, the more bottles you need to take.
2. Bottles must first be washed with a special brush, then dried open. This is done in order to remove foreign odors.
3. The strength of the plastic can be slightly increased using one trick. So, the bottles should be placed in the freezer for several hours, then you need to tighten the caps of all bottles tightly and leave them at room temperature, due to which the air inside the container will begin to expand.
4. In order to make a durable ottoman that does not deform even under strong pressure, it is necessary to fill 1/3 of the container with sand. This manipulation will allow you to get a durable product that will last for many years (the ottoman will be heavier and more reliable).
5. An ottoman is a product that will be constantly sat on, so for its manufacture it is better to choose curved bottles, which are much stronger than straight ones.
6. If you are going to make three-dimensional objects, then it is better to connect them in fragments using strong adhesive tape. This means that first you should tie together two or three bottles, and then form them into a product. You should not skimp on the connection, because the more tape you use, the better the design will be.
7. To make the seat comfortable, the bottle structure is covered with a layer of padding polyester or other soft material on top, and only then can a cover be put on top.
8. In order for the product to look aesthetically pleasing, it is important to make the cover exactly the size of the ottoman.
9. The color of the product must be chosen in such a way that it looks harmonious with all interior items.
10. When creating upholstery, it is necessary to use durable, wear-resistant material that will last a long time. Therefore, do not expect to sew a cover from silk, cotton or other delicate fabrics.
11. If pets live in the apartment, then you need to make sure that they do not sharpen their claws and teeth on the ottoman.

    Protecting Furniture from Cats

    It is recommended to choose durable, shaped bottles for making structures

Advantages and disadvantages of homemade ottomans

Furniture pieces made independently have a large number of obvious advantages. Firstly, you will have the opportunity to independently decide on the color of the product and the type of fabric. Thanks to this, you will be able to create a product that fits perfectly into the interior.

Secondly, you can change the shape of the ottoman at any time. You just need to remove the cover with the soft base and disassemble the bottles, after which the pouf can be assembled into any other shape.

You can make a different shape and adjust the dimensions of the ottoman at any time as you wish.

Products made from such material are weightless, so they can be moved from one place to another and even taken with you to the dacha. Such furniture is good for a children's room - the child will be able to carry the pouffe himself if necessary. In addition, you do not need to take care of the product in any special way. You can immediately sew several covers for the pouf, which are washed periodically as they become dirty.

Making a structure from bottles will only take about two hours (sometimes more). The cover can be sewn in 35-40 minutes - this is a unique opportunity to show your creativity, because the finished product can be decorated with various decorative elements.

The seat cover can not only be sewn, but also knitted from durable yarn

And lastly, to make an ottoman from bottles you need the most minimal financial investment. At the same time, if you already have bottles and an unnecessary piece of fabric in stock, then you won’t have to spend any money on an ottoman.

It is worth noting some disadvantages of making products from plastic bottles yourself:

• not all people can find even 2-3 hours of extra free time;
• you will still have to purchase fabric for covering the structure, spending some money;
• To sew a cover, you need, although minimal, skills.

  It is better to use furniture fabric to cover the ottoman.

Kinds

This original piece of upholstered furniture combines not only softness and practicality, but also a variety of shapes and designs!

The pouf cabinet is a roomy and neat model. In the hallway, ottomans with drawers and built-in shelves are often needed. They help keep the house tidy by storing shoes and various accessories.

The transformable pouf will be appreciated by fans of the functional direction in design. It has the shape of a cube and can easily be transformed into a compact chair, a cozy armchair or even a bed.

A wide variety of designs and designs allows you to create a pleasant atmosphere in the room without taking up much space.

A Moroccan pouf is an interesting thing that will bring freshness to even the most restrained interior. It looks like a large cone-shaped pillow, and is made from various pieces of fabric, most often leather. The ottoman can be decorated with ethnic embroidery in the spirit of colorful Baroque, which gives it a special chic.

The ottoman-couch was invented a long time ago, but its popularity is only growing. This model is often equipped with special compartments - an ideal ottoman for storing shoes in the hallway.

This piece of upholstered furniture contains many useful functions and mechanisms. But most of all it is most conducive to oneself after a long and tiring walk.

DIY ottoman made from plastic bottles

In order to make the structure yourself, you will need to prepare the necessary materials. This time you won’t have to use carpentry kits, hammers, or screwdrivers. The manufacturing process will involve the following:

• The first thing you need to prepare is, of course, plastic bottles. Their volume should be at least 1.5 liters, and the quantity depends on the dimensions of the desired product (usually one ottoman takes from 12 to 35 bottles, here it is important to calculate the diameter of the product in advance);
• several rolls of adhesive tape (it is advisable to buy extra);
• durable cardboard (you can use any equipment boxes);
• in order to make the ottoman soft, you need to take a padding polyester - it is better if its thickness is about 30-40 centimeters, then the product will be comfortable;
• scissors and sewing kit for making upholstery;
• upholstery material (you can buy a new piece of fabric or use old clothes for such purposes (jeans, jackets);
• for sewing a cover, it is better to choose raincoat fabric; this material is suitable in cases where the ottoman is planned to be used outdoors;
• zipper (plastic or metal), for the ottoman cover.

Despite the various shapes, all bottle ottomans are made according to the same principle, so even an inexperienced craftsman can handle this process.

Option for an ottoman made from plastic bottles

Step-by-step instruction

Step 1. First of all, all plastic containers must be cleaned of dirt.

Bottles must be clean

Step 2. Next, you need to connect two bottles together using tape. It is advisable to wrap them several times, not sparing the adhesive tape, because this will only increase the strength of the product.

It is necessary to connect the bottles in sections

Step 3. In the same way, several sections should be made, which will then be connected to each other. The result should be a lot of blanks. Then combine three bottles at a time. The main thing is that they are located strictly on a flat surface, otherwise the ottoman will turn out crooked. After which you need to make several sections of four bottles each and stop there.

We connect bottles into several sections

Step 4. Next, all these blanks must be connected to each other. The largest sections are installed in the middle, and the rest along the edges. The result is a round structure.

The result should be a circle

Step 5. Now our workpiece can be put aside for a while and take cardboard, the seats will be made from it. To do this, cut out two round parts from cardboard according to the parameters of the ottoman itself. These circles are fixed at the bottom and top.

Cutting circles from cardboard

Important! If you have thin plywood on hand, it is better to use this material instead of cardboard. Only in this case, instead of scissors, you will have to arm yourself with a jigsaw.

Step 6. The bases are tightly taped to the bottles, forming the frame of the future ottoman.

You will need to secure the cardboard parts to the ottoman structure

Step 7. Next, you will need to take a multi-layer padding polyester and cut out three parts from it, two of which will be round in diameter for the pouf and one rectangular for covering the base. All these parts must be connected with a thick thread and a needle around the frame.

We make blanks from padding polyester

We cover the structure with padding polyester

Step 8. After connecting all the parts, you need to upholster the ottoman with thick fabric. In this case, it is necessary to cut out parts by analogy with padding polyester. Then they should be connected to each other using a sewing machine (if you don’t have one, you can sew it by hand).

Marking required

You can sew a zipper on the side, so the cover can be quickly removed. In this case, you should decide in advance on the length of the zipper so that it does not turn out to be too short or too long. Some crafters use another option; they tighten the cover with a cord at the bottom. This way the drawstring will remain invisible.

Sew the parts together

Pull the cover

If desired, you can embroider the product with all kinds of additional elements. Here it is important to show your imagination.

Video - Ottoman made from plastic bottles: the creation process

Making a plastic frame

To make a frame, you need to collect empty soda containers, buy wide tape (50 mm) and prepare scissors or a sharp knife. All containers must be of the same volume and shape. For a medium-sized soft stool you will need up to 40 2 liter bottles. This container is made more durable, and its height is greater than that of smaller bottles.

The shape and size of the chair, i.e. the final result, are thought out in advance. You can experiment by placing bottles on the floor in the shape of a circle, oval or square, and at the same time count the required number. Poufs in stores most often look like a cube upholstered in soft fabric. Let this form be chosen.

Prepare 32 bottles and divide them into 16 pairs. The top of one bottle from each pair is cut off by approximately 1/3. The second bottle is inserted into the resulting glass with the lid tightly screwed down until it stops. There are no strict requirements for the cutting line.

The result was a durable structure made from a pair of cylinders. To prevent the ottoman from creaking when they sit on it, each pair formed is wrapped in newspaper or old cloth and secured with tape.

Next, 4 double bottles are placed in a row as follows: in the 1st and 3rd pairs the bottle caps are directed upwards, in the 2nd and 4th pairs - downwards. The installed row is secured with adhesive tape. Prepare 3 more rows in the same way. All rows are placed tightly against each other and tightly wrapped with tape.

To strengthen the structure, the position of the covers in the rows should be changed in a checkerboard pattern. The result was a light and strong cube of 16 double cylinders. This is the hard base for the soft chair.

An ottoman with a round base is made according to the same principle. The first row of bottles is installed around the central pair, the direction of the caps changes alternately. Everything is held together with adhesive tape. Then the 2nd row is installed, again everything is tied together with tape. The number of rows depends on the desired size of the ottoman. If you place 2 bottles in the center, you get oval poufs.

Decorating the ottoman

In order to give the bottle ottoman an unusual appearance, you can decorate it as you wish. In this case, it is necessary to take into account the following nuances:

• the cover should not fit too tightly to the structure, tightening it, or dangle - this looks untidy;
• the fabric must have a design that matches the overall interior;
• It is not recommended to take fabric that is too thin, as it will quickly become unusable.

  For upholstery, use only thick fabric

Choosing upholstery material is a responsible process, so it is necessary to first study all possible options before purchasing.

Table No. 1. Case manufacturing options

Patchwork ottoman

Interesting idea for decorating a children's ottoman

Decorative ruffles can be used as decoration; they are sewn along the entire circumference of the ottoman. This product will look especially good in a child’s room. You can even cut various ruffles from old skirts and dresses.

You can decorate a leather or fabric ottoman with buttons - to do this, you will have to first cover them with material, and then make a screed on the surface.

Bottle chair

An ottoman is a miniature product with which you should start making furniture from bottles. A more complex design is a chair, but if desired, you can quickly build it with your own hands.

You must first prepare a large number of bottles; it is better if there are a supply of them. Otherwise, you will need all the same materials as in the previous case.

You can easily assemble even a large chair from bottles

Step-by-step instruction

Step 1. First you need to cut the plastic bottle, after which the upper part will need to be turned over and placed in the lower one. Then a whole bottle is inserted there and closed with a lid, and the top is closed with the lower part of another container. The result is a very strong and stable structure, which is what is required in the case of a chair. Using the same principle, a fairly large number of preparations should be made, so all family members can be involved in such work. If you wish and have a lot of bottles, you can even build a small sofa.

The process of connecting bottles is shown in a detailed diagram

Step 2. You need to connect the resulting modules in four pieces using tape. As in the previous case, it is better to use more of it, especially when creating massive structures. Next, the modules from the bottles must be connected again, wrapping them with tape on all sides.

Connecting the bottles together

Step 3. Using the same principle, constantly wrapping new layers of tape, you should make the back and armrests of the chair. By the way, instead of adhesive tape, cling film in rolls is perfect for such purposes - you can find it in any supermarket. The advantage of the film is that it connects the modules more tightly than any adhesive tape, and it is much easier to work with.

Assembling the back and armrests

Step 4. In this case, you should also make a soft base from foam rubber or padding polyester - then the product will be more comfortable. The parts are cut out to the shape of the chair and sewn together. Next, you just need to make a cover for the chair and you can use it for its intended purpose.

We cover the chair with a fabric cover

Bottle sofa

You can make a small sofa using exactly the same scheme. Of course, in this case you will need a lot more bottles, but they should be connected in the same way as the options described above. Here it is better to use several times more tape or cling film, because the sofa should be strong.

It is necessary to increase the modules until you get a sofa

You can read about other ways to make a sofa with your own hands in our article.

Video - Sofa made of plastic bottles

Required Tools

Tools you will need are scissors, sewing needles, a stationery knife, and a pencil. For a cylindrical ottoman, you will additionally need a compass; for a square or hexagonal product, a ruler or square.

Use quality plastic bottles.

For ease of sewing, use a sewing machine.

Tip: for work you will need a flat surface on which the bottles are connected to each other.

Other types of furniture made from plastic bottles

Since plastic bottles are a versatile material, they can be used to create various designs.

Bottle picnic table

In this case, we will talk about making a small table that will be convenient to use outdoors.

A simple version of the table, which was obtained by gluing bottles to a tray

To make it, you will need four bottles, which are glued with the bottom to a small tray that acts as a tabletop. The tabletop can be painted using acrylic paints. In addition, it is recommended to use pieces of material as decorative elements.

Bottles can be painted with spray paint

You can make a more voluminous table, but in this case it is necessary to provide a durable tabletop. It is quite easy to cut it out of multi-layer plywood or MDF sheet.

In order to make the table durable, it is advisable to take more bottles, because in this case it is better not to skimp on material. Only then can you get a durable product that will last for many years.

A more durable table option

Wall shelves

Such original wall shelves are perfect for a cottage, a children's room or a kitchen in any apartment if the interior suggests creativity. Plus, they are quite easy to make at home.

In the process we will need the following:

• plastic bottles - 9 pieces;
• scissors;
• acrylic paint;
• glue.

Step-by-step instruction

Step 1. To start, the bottles need to be cut - we only need the part with the bottom.

We cut each bottle

Step 2. Next, the bottles must be painted with acrylic paint and joined together with glue. After which they can be fixed to the wall with double-sided tape.

We fix the bottles on the wall

You can do this in another way. To do this, the bottles are first fixed on thin plywood, and only then this frame is installed on the wall.

How long will it take to manufacture the structures?

Making any pieces of furniture from plastic bottles will not take too much time. It is important to follow the instructions, then the whole process will be invisible. Of course, this will also depend on the dimensions of the product.

You can make structures either alone or with children - working with bottles is not dangerous and is not difficult. In any case, it is recommended to first check the availability of all materials and fixtures. As mentioned earlier, it is better to make blanks with a reserve in case some elements are missing.

If you involve all family members in the work, you can even make a massive structure in a few hours

It’s very easy to make an ottoman or any other design from bottles with your own hands. At the same time, it is important to adhere to the basic principle of connecting modules, and also to show your imagination better at the stage of creating decor. In addition, the creation of such furniture will not require any serious material investments, which means that in case of failure it will not hit your wallet.

Necessary materials

What else is needed to create an ottoman? To understand the process, watch the video:

So, to start the master class, prepare:

• 14 bottles of the same size (colors may vary);
• marker;
• jigsaw;
• Double-sided tape;
• strong threads;
• thick needle;
• stationery knife;
• foam rubber for upholstery (it is better to take at least three cm thick);
• two scraps of plywood or other durable material;
• fabric for the cover;
• ruler.

That's it, the materials are prepared, you can start working. The result will be something like in the photo: