How to place a washing machine in a small bathroom

The washing machine rarely becomes a key element of interior decor.
There are some tricks that allow you to hide the machine in the bathroom without restricting access to the device. Minimalists don't like it when carefully organized interior design is overwhelmed by poorly integrated fixtures. A modern food processor, a coffee maker, or an elegant retro oven can be the icing on the cake of a kitchen design, but a washing machine is difficult to present in an aesthetically pleasing, attractive way. Even a built-in model is quite difficult to make part of the interior. Many people try to hide this household appliance using a number of options - install it in a niche, hide it under a countertop, or purchase a cabinet for a washing machine in the bathroom.

How to build a machine into a closet, what materials such furniture can be made from, how to implement this solution so that it is aesthetically pleasing and functional - this will be discussed below.

Usually a bathroom is designed for a long time, so choosing a washing machine is an important decision. You need to choose a freestanding or built-in model:

• when buying built-in appliances, there are many options to cover them with furniture panels;
• free-standing equipment is cheaper than built-in equipment, and if necessary, it is easier to replace and repair.

When arranging a bathroom, it is advisable to make sure that the washing machine is not visible. Thoughtful solutions can make the machine invisible. Let's consider interesting options for large and small floor cabinets, photos of the implementation of interesting projects.

How to make a cabinet above the washing machine in the bathroom?

Design of a small, bright bathroom with efficient use of space

Nowadays, small-sized studio apartments, or apartments in the so-called “Khrushchev” buildings, are very popular, where every centimeter must be used correctly in order to get the maximum benefit from the space. For a modern interior, beautiful, high-quality and functional furniture is the main rule.

A cabinet for a washing machine in the bathroom allows you to close the machine and use the rest of the space for storing household chemicals, towels, and linen.

One of the important points is the equipment of the place for the washing machine. It doesn’t matter where it will be - in the bathroom, hallway or kitchen. Installation in the bathroom is of course much simpler than, for example, in the kitchen. No additional hosing is required for installation.

Cabinet for washing machine in the bathroom in a built-in niche

To save space in a room or disguise household appliances, it has become popular to build a cabinet above the washing machine.

A built-in cabinet for a washing machine in a small bathroom allows you to properly use the free space

How to choose a sink over a washing machine

You won’t have to decide for a long time with combined models. You just need to choose the appropriate design and installation dimensions.

When buying a separate washbasin, you need to look for a compact model

An alternative bowl shape should be shallow (almost flat) to save space for the siphon.

Materials

Budget models made of plastic or earthenware have a significant drawback - they are produced according to standard shapes and dimensions.

The option with cast marble sinks is more convenient, since the shape, dimensions and design can be specified when ordering.

Marble mixed with polymer or concrete is easy to maintain and lightweight. You can install any type of structure yourself.

Marble sink is durable and will last a long time

Drain

Water does not stagnate in a vertical siphon. It very rarely gets clogged, and there is no unpleasant odor in the bathroom.

Vertical siphon is more practical

If you choose this drain option, you will have to sacrifice the size of the washing machine. A horizontal siphon is installed next to the body of the machine. It is safe and airtight, but clogs quickly.

The “washing machine” drain is connected to the pipes under the sink

Safety regulations

There is no need to install sockets under the sink, next to the siphon or near the baseboard.

The bowl design is equipped with a hole to prevent overflow.

It is located under the tap, or slightly above the drain hole. The fuse tube is combined with the siphon.

Suitable sizes

Add 4-6 cm to the location of the washbasin. This extra centimeter will protect the machine from moisture getting on the panel and further reinstallation of the sink structure as a whole. You should not purchase a deep one: installation at a high level does not fit into the interior.

Sizing chart

Advantages and disadvantages of this interior solution

Washer and dryer in a cabinet with convenient and functional shelves and drawers

Let's start with the positives.

1. Firstly, the cabinet protects household appliances from moisture (if the washing machine is in the bathroom, water naturally gets on it), thereby protecting its body from corrosion.

   A convenient cabinet for a washing machine and washbasin looks stylish and beautiful, and also protects the washing machine from external influences

2. Secondly, the cabinet can be made vertical, and the upper compartment above the machine can be filled, for example, with household chemicals. Everything is convenient and “at hand”, and significantly saves space. A large number of additional shelves creates order and simplifies cleaning the bathroom.

The cabinet for the boiler above the washing machine protects it well from prying eyes and serves as additional storage space

A built-in wardrobe can only be installed in large rooms. It requires quite a lot of space, so this option, unfortunately, is not suitable for small apartments.

Rack with open shelves above the washing machine in a small bathroom

The only downside is that you may not notice the leak in time if the washing machine is installed inside. Also, the cabinet may not last long, but this will depend on the material you choose for its manufacture.

White homemade cabinet above the washing machine installed in a niche

Minimalist bathroom with washing machine placed under the cabinet

Advantages and features of a built-in washing machine under the sink

Installation of equipment is done in the kitchen or bathroom. Manufacturers are trying to make more compact models that can be hidden or placed anywhere. In a beautiful bathroom, especially in combined bathrooms, there is not enough space, then the main factor when choosing a washing machine will be its dimensions. Advantages of the built-in side machine:

• does not interfere with movement;
• Convenient installation of the sewage system;
• you can purchase a combined set of plumbing fixtures;
• there is no risk of moisture getting into the electrical network;
• the functionality of the space increases.

Also, when choosing a model, you need to take into account some features of both the washing machine and the washbasin:

• height, capacity of the machine;
• washbasin placement level;
• their width;
• selection of suitable space for installation.

Disadvantages include the small capacity of laundry, as well as the fact that the drain needs to be cleaned frequently due to the non-standard shape of the siphon.

Selection of building materials

Cabinet above the washing machine made of white semi-gloss laminated chipboard, made independently

Before choosing building materials, you need to carefully and accurately measure the bathroom and washing machine. Different models have different dimensions. Then you need to make a drawing, taking into account the dimensions of the cabinet. It should be 3-4 cm wider than the washing machine.

A small wall cabinet above the washing machine in a niche

In terms of height, choose the option that is most suitable for you, it can vary from 2 to 2.5 meters. The higher the structure, the greater the number of functional shelves. Please note: the tall structure is unstable. The size of the cabinet should correspond to the size of the bathroom; large furniture in small rooms looks awkward and takes up a lot of space.

Moisture-resistant MDF for making a bathroom cabinet

After taking measurements, we go to the store and select moisture-resistant MDF, which is the most suitable and budget option for making furniture. This is a relatively new material, which is obtained by pressing fine dry sawdust. But at the same time, it is very resistant to aggressive environmental influences. When choosing MDF, you should pay attention to the thickness, choose the required color and texture. It must have a PVC coating for additional protection from moisture. The MDF thickness required is at least 19-20 mm; with such parameters, the cabinet will be very reliable and can withstand a washing machine, the weight of which is about 80 kg.

Carefully examine the surface of the product for chips and scratches. Start making.

Equipment and tools for cabinet making

You will need a fairly standard set of tools:

1. drill;
2. screwdriver;
3. jigsaw;
4. metal corners;
5. screws;
6. tape measure, pencil.

Before making the cabinet, we calculate the dimensions of all parts. The intermediate shelves will be 10-15 mm shorter than the bottom and top walls. We make markings and cut out parts to individual sizes. You can order ready-made material, which will be cut on a special machine.

Details of the future shelf made of white MDF

Step-by-step instruction:

1. First of all, we attach the legs to the base.
2. Mark the holes for the shelf holders on the side walls.
   Holes for fastening shelves on the side walls
3. Drill holes with a drill and insert shelf holders.
4. We take the base (bottom) and connect it with the help of corners and screws to the side walls.
   Holes for connecting the cabinet frame

   Pinch screws and end hole

5. We secure the top of the cabinet and the back wall using corners.
6. Next we install the internal shelves.
7. Finally, we install the door with a closer. If desired, you can make a door with a mirror. Mirrors visually increase the space in the room, so many designers take advantage of this advantage.

A cabinet with a machine inside and shelves, built into a bathroom niche

In some cases, the washing machine is not closed with a door, and it “fits” harmoniously into the new interior. A white washing machine can be placed in a classic snow-white bathroom, and a gray metallic one will suit a bathroom with gray ceramic tiles.

Large cabinet above the washing machine near the shower

If there is no time and opportunity to place a cabinet, a simpler and more affordable option is possible - placing shelves above the washing machine. They can also store various accessories that are necessary for daily care.

Convenient shelves above the washing machine

They can be made from available materials, for example, pieces of MDF that could have been left over after renovating an apartment, or from glass coated with film (for easier maintenance).

Spacious, hand-made closed bathroom cabinet

Bathroom cabinet with space for a washing machine

Should I buy ready-made furniture, or create a budget-friendly and most suitable universal rack or cabinet? In any case, the choice is yours.

Corner cabinet with built-in washing machine

Washing machine in a small bathroom with convenient and functional cabinets and shelves

How to place a washing machine in a small bathroom without resorting to the services of a designer

Few people nowadays can boast of spacious apartments. Most people live quite decently in small apartments, and even with tiny bathrooms. Of course, on the one hand, this may seem justified, but most often the lack of sufficient space is a big drawback, especially if it is vital for you to place as many pieces of furniture or equipment as possible in a small area.

And yet, even the smallest bathroom can be equipped in such a way that it turns from an incomprehensible closet into a comfortable and very functional room. Follow our tips and you will definitely want to spend more time in this place!

The most important problem that almost all families face when arranging a small bathroom is the dilemma with the location of the washing machine. But there is also, as a rule, a toilet, a washbasin, a laundry basket... Most people can’t even dream of a cabinet for irreplaceable women’s items. So how can you also place a washing machine there so that there is enough space for everything? We will help you solve this problem without much pain.

How to place a washing machine in a small bathroom

Let's figure out together where to put the washing machine in a tiny bathroom so that there is still some space left. Trick #3 is our favorite!

1. One of the most famous design techniques involves placing the washing machine next to the sink. A single tabletop in addition to a mirror will harmoniously unite and at the same time expand the space.

2. But this idea is suitable for a high-positioned sink. A small space will look much more cozy.

3. The most stylish solution in our opinion. Be sure to try this idea in your apartment!

4. Maximize the use of all available niches. For example, in addition to the washing machine, you can arrange a cabinet in a niche to store anything.

5. What do you think about this functional design? As you can see, the place for a washing machine can be very, very unusual.

6. In old houses it is rare to find a spacious bathroom. For this reason, many people have to install their washing machine in the most unusual places. An excellent solution would be to place the machine under a flat sink.

7. If you have a shower stall installed instead of a bathtub, consider yourself incredibly lucky, since there is much more space for the machine. If there is a shower, even the largest washing machine will fit in the room.

In the free spaces you can place a closet, a laundry basket and various functional shelves.

8. A small cabinet will turn into a kind of house for a washing machine, and a nice curtain can play the role of a door.

9. Everything in this design is thought out to the smallest detail. Brilliant!

It doesn't matter if you have very little space in your bathroom. At the very least, this is great motivation to get creative. Take note of our ideas and create!

These tricks will help make even the smallest bathroom more comfortable. Remember that rational design solutions will help you make the most of a small area.

Save useful tips from experts for yourself and don’t forget to share them with those who are planning a renovation!

amazing.cc

Bathroom shelves

If you couldn’t fit an automatic washing machine (WMA) under the sink, you can still save space. Many users use the lids of their washing machines as a surface for placing bath accessories, microwaves, kettles and other items - despite the prohibition in the instructions.

Look up and see wasted space - above the washing machine. Why not add a few shelves here? Or even a small locker? It turns out that this idea has long been picked up by manufacturers - they offer ready-made solutions that differ both in design and in materials of manufacture.

Varieties

Shelves above the SMA can be made:

• Open. They do not have doors; any object is easy to reach.
• Closed. If you are annoyed by the color cacophony of mismatched jars and bottles, you can hide them behind the shelf doors. By combining the shelves with common walls and doors, you get a wall cabinet with shelves.

Suitable materials:

• Plastic. The shelves are not afraid of moisture and are cheap. But not strong enough. And most importantly, mold can grow on plastic. It is recommended to choose perforated products - then moisture will not collect on the surfaces.
• Metal. Durable and stylish. But you only need to choose coated metal that is not susceptible to corrosion. Stainless steel and chrome-plated metal are suitable. For interiors in Provence and country styles, forged versions, as well as bronze products, may be suitable.
• Ceramics and glass. These are usually small decorative items. They are not afraid of moisture, but are very fragile. As a rule, ceramics and glass are used together with wood or metal.
• Tree. Fiberboard and MDF sheets are most suitable - they are durable, light, and look respectable. Minus - susceptible to moisture. But you can use wood impregnated with special compounds that repel moisture.

The shelves are attached - in the bathroom or in the kitchen, using hinges, brackets and corners. Also, shelves can be a single structure united by common components.

The cabinets above the washing machine can have different designs - the imagination of the creators is not limited by anything, you only have to take into account the cost of materials and the size of the room. The cabinet can be made:

• Mounted. This is the simplest option. By making it deeper, you can even hide meters or communications in it.
• Free standing. In appearance it looks like a cabinet. The shelves are combined by side walls into a single whole.
• Floor. This is essentially a shelving unit with open shelves. An example of such a solution is in the photo below.

Under the table top

Often, a washing machine replaces a shelf for storing various items. But during operation it inevitably vibrates, causing things on it to literally shake. To avoid this, and also to organize additional useful space for placing items, you can use a tabletop. It is a separate mounted module. It can be made of various materials, be of various shapes and sizes. The countertop is convenient in that it serves as a shelf for items and at the same time is located above the surface of the washing machine.

A very good option for placing the machine is next to the sink, and if you combine them with a countertop, it will turn out very stylish and convenient.

Advantages and disadvantages

Pros:

• They cover household appliances from moisture and protect them from corrosion - this applies more to structures with side walls.
• If you make doors, you can place not only bathroom accessories on the shelves, but also detergents.
• Shelves keep your bathroom tidy. The more shelves there are in the room, the easier it is to clean.
• All supplies and accessories not only occupy their assigned “seating” places, but are also easily accessible - to take the necessary product, just stretch out your hand.

The solution in question has no disadvantages - only one benefit. If, for example, when installing an SMA in a cabinet or cabinet there is a danger of not noticing a leak in time, then in the case of shelves there are no such risks.

In furniture

Today, the furniture market offers special bathroom sets that provide space for household appliances. The main condition before purchasing such modules is to make sure that the size of the niche matches the parameters of the washing machine. If for some reason you are not satisfied with the available headsets, they can be made to order. This solution will not be cheap, but you are guaranteed to get the ideal option that matches the dimensions of the room. The main advantage of placing the machine this way is that the furniture can be matched to the style of the room.

Review of ready-made solutions

Go to any online store of functional furniture, and you will be presented with dozens of models designed for installation above the washing machine. Especially popular are cabinets with many compartments and linen baskets.

Pillar cabinet

Pillar cabinet - ideal for the bathroom. The machine is protected from moisture. The shelves are open and closed, the latter are adjustable in height. It is easy to hide detergents - powders, conditioners, etc. behind the doors; small but important items used daily can be placed in plain sight. The size is designed for a full-size SMA with a width of 60 cm. Material - laminated MDF.

Algot 8 - model from Ikea

You can assemble a variety of combinations from ALGOT series items. In the photo there is a whole wall-mounted module with a pull-out laundry basket. You can make one or two baskets - the module is assembled taking into account the characteristics of the room and the needs of the user. Here, in addition to shelves, there is also a convenient clothes dryer. If there is no dryer in the machine, then small items can be dried on the shelves - no water gets on the cover of the SMA. A variety of materials were used in the manufacture of module components - chipboard, galvanized steel, polypropylene.

Floor cabinet from Leroy Merlin

An elegant solution, laconic and functional. It is possible to save space and create convenient places to store towels, linen, and toiletries. Width - 64 cm. A full-size washing machine with a width of 60 cm will fit here. The design does not depend on the parameters of the load-bearing wall; it can be moved from place to place. The bottom is open at the front and back. The floor cabinet allows you to hide all communications necessary to connect the washing machine.

Mounted version from Vod-Ok

Household wall-mounted module with a niche. This option will be appropriate both in the bathroom and in the kitchen - if it fits into the interior. Made from MDF and chipboard. You can hide a lot of useful things in a niche. The width is designed for a full-size device. The manufacturer also offers a variation with a pull-out laundry basket.

What other options are there?

In cramped conditions, when there is no extra space, SMA owners try in different ways to save space, using the space above the machine. To do this, other household appliances are placed above the device. For example, an oven. A horizon is placed between the washing machine and the oven, located in a single module. True, the oven should be induction - not heated. The same solution will be useful when placing a dryer above a washing machine.

Another solution, simple and practical, is a built-in wardrobe above the SMA. It's easy to do it yourself. Let's look at an example of creating wooden shelves on your own.

Where to put the washing machine in the apartment?

The ideal place to install a washing machine is a separate laundry room. That is, a small room that is a home mini-laundry with a washing machine, dryer, laundry baskets and a supply of household chemicals. However, for most of us, a separate laundry room is nothing more than a dream. Therefore, it is necessary to integrate the unit into those rooms that have other functions. Where and how to place the washing machine so that it does not interfere, does not spoil the picture and does not create inconvenience?

Washing machine in the bathroom

One of the most practical solutions for a medium-sized bathroom is to install a washing machine under the countertop with a washbasin. In this case, the space above the “washing machine” is used effectively. In this case, the machine can either be covered (with a furniture facade, curtain) or left in plain sight.

In a large bathroom, it is advisable to build a so-called utility cabinet - in it you can hide not only a washing unit, but also, for example, a water heater.

If the wall along which the bathtub is installed is long enough, you can fit the machine into the corner. If you have free centimeters, it is advisable to erect a partition between the bathtub and the machine. Firstly, it effectively zones the space. Secondly, the machine does not flood with water. The partition can be made useful by equipping it with niche shelves at the end or on the side of the bathtub.

If there is very little space, you will have to sacrifice something: for example, give up a full bath in favor of a sit-down model or a shower corner. Some say goodbye to the sink forever, getting used to washing their faces over the bathtub.

There is also a non-standard solution - a washbasin located directly above the bathtub tank. This is easy to implement if you purchase an asymmetrical bathtub. This model is offered, for example, by Ravak (“Be Happy”).

If the bathroom and toilet are separated by a non-load-bearing partition, you can think about combining them. As a rule, this step allows you to place in the bathroom all the necessary minimum (bathtub, washbasin with cabinet, washing machine, toilet and laundry basket).

The absence of load-bearing partitions opens up other possibilities. If the bathroom is small, its usable area can be increased by using a niche recessed into the adjacent room. For example, an opening is made in the wall between the bathroom and the kitchen. A box is being erected from the kitchen side. A washing unit is built into the resulting niche.

And the last option is a washing machine directly under the sink. This is a last resort measure that should only be considered if other solutions cannot be implemented. You will have to select a special sink and a machine of the appropriate size. It is not a fact that the sizes will be comfortable.

Before making a final decision, it would be a good idea to consider moving the washing machine outside the bathroom. Perhaps this will allow us to find a more rational option.

Washing machine in the kitchen

This room ranks second in terms of frequency of installation of a washing unit. Kitchens are usually much larger than bathrooms, so it’s easier to find a place for a machine.

However, it is more difficult to organically fit a washing machine into the kitchen space than into the bathroom interior. The presence of a washing unit that stands out from the composition can negate all the efforts of the owners in the design and decor of the kitchen. How to make sure that the “washer” does not spoil the overall picture?

There are three solutions here.

1. The washing machine is hidden in a cabinet or in a cabinet-column behind the facade (it is necessary to limit the possible movements of the machine during the spin cycle).

2. The unit is matched to the color of the facades.

3. The washing machine matches the kitchen appliances in color and design, so it looks absolutely harmonious.

If the kitchen is decorated in a classic, vintage or country style, the first option would be preferable, that is, placing the machine behind the cabinet or cabinet door. After all, the design of “washing machines” is absolutely modern. This unit is difficult to associate with traditional surroundings. To ensure that the washing machine does not conflict with the kitchen decoration, it is better to remove it from sight.

All three solutions are appropriate in a modern-style kitchen.

Another idea for the kitchen is to build a washing machine into a bar counter or island. In this case, the machine can be either front-loading or vertical-loading. Access is organized from the appropriate side: this is either a facade or a folding tabletop.

Washing machine in the toilet

If a separate toilet is spacious enough, you can consider this option. You will probably have to move the toilet towards the wall and move the sink, if there is one, reducing its size. Washing a machine in the toilet is safer than in the kitchen. The kitchen has expensive furniture. Many have wallpaper and wooden floors. If there is a leak from the machine or the hoses, this can entail serious costs (especially if the neighbors below suffer). Most people have tiles and minimal furniture in their toilets.

By the way, for greater safety, it is recommended to make high thresholds in bathrooms to prevent water from escaping from wet rooms.

Washing machine in the corridor, hall, storage room

If there is no place for the machine in the bathroom, toilet, or kitchen, you need to look around these rooms.

Is there an empty corridor niche, hall, or storage room next to them? It is quite acceptable to place the washing machine in such places. You cannot install it only above living rooms.

So, the “washing machine” can be taken outside wet areas. How to connect? Easy and simple - you need to make holes for the hoses in the wall of the bathroom or kitchen. A load-bearing wall can also be drilled (if these are single holes and not a “sieve”).

A washing machine, of course, looks out of place in a hallway or hallway. Therefore, if possible, you need to close it: for example, make a cabinet or cabinet for it.

By the way, a built-in closet or pantry with a washing machine is exactly the laundry room that many people dream of. True, in a mini version. This cabinet can store household chemicals and laundry baskets.

DIY rack

Don’t want to spend money on ready-made furniture, or maybe you have your own ideas? Then you can design or make shelves yourself. Home craftsmen can easily cope with the task - the main thing is to find a suitable material - durable and moisture-resistant.

Preparation of the drawing

Let's consider an example of creating a rack - a simple and affordable design. Start by drawing up a drawing. Only by making an accurate calculation will it be possible to purchase materials. In the drawing, reflect the exact dimensions - height, width and depth of the structure. The dimensions will depend on the size of the washing machine - it must fit completely into the niche of the rack. Choose the height at your discretion. But keep in mind that an excessively high structure will be unstable and bulky.

The width of the rack should be 3–4 cm larger than the width of the machine.

Preparation of materials

To create a rack you will need the following tools and materials:

• Chipboard. There must be a moisture-proof coating. The PVC layer allows the use of chipboard for furniture installed in the bathroom. It is not recommended to use laminated MDF sheets - they will swell from moisture and lose their original appearance
• Metal corner.
• Self-tapping screws.
• Four legs.
• Screwdriver or screwdriver.
• Marker and tape measure.

How to assemble?

Assembly order:

1. Referring to the drawing, mark the materials and cut out the parts. So, if the rack has dimensions (HxWxD) 250 x 45 x 64 cm, the following parts will be needed:

• 2 side panels 247 x 45 cm;
• 4 shelves 64 x 45 cm;
• top panel 67 x 45 cm;
• bottom lintel 67 x 10 cm.

1. Assemble the finished parts using self-tapping screws and corners. First attach the roof and bottom lintel. At a distance of 85.5 cm, fasten the first shelf, after 38.5 cm - 3 more pieces.
2. Screw the legs to the side walls. That's it - the rack is ready.

Installing a glass shelf

If there is no space for a rack, limit yourself to the simplest solution - make a glass shelf above the machine. It won’t fit many accessories, but it certainly won’t be superfluous. Buy a glass shelf at any construction market; your task is to install it correctly. The width of the glass must be at least 0.4 cm. Glass installed in bathrooms must be covered with a special film.

Make fastenings from aluminum profiles or decorative holders. To attach them to tiled walls, you will need a drill. But do not turn on the hammer drill mode. Insert dowels into the holes made, and holders into them. Secure the glass surface and the job is complete.

Thanks to the shelves installed above the washing machines, it is possible to obtain significant space for useful items and accessories. In addition, by browsing the assortment of online stores and showing your imagination, you can enliven the room with interesting interior solutions.

How to do it yourself?

Bathroom cabinets have a right to life: they have a simple geometry and are made from affordable materials, they are budget-friendly, but always exclusive. If you have tools in the house and you know how to use them, then this is a feasible task.

• Design a cabinet, the simplest option is to make a vertical pencil case or assemble a combination of two parts: a rack at the top and a box for the car at the bottom. The part with shelves can be corner.
• Take measurements. Some companies sell “semi-finished products”: cuts for walls, shelves, hinged doors, this simplifies the task, their total cost should not exceed the price of finished cabinets. If the house is not new, then measurements need to be taken several times: the walls are very uneven, like the level of the floors.
• Wall connection. You need to make holes with a 5 mm drill. If the canvas is solid, then duplicate the holes from the edge of the part to prevent longitudinal cracks from forming. For strength, use corners, coat the wood joints with PVA glue, and screw in the screws.
• If the cabinet has legs, then furniture screws will successfully cope with this task; they can be used to conveniently adjust their height. To prevent the hats from scratching the floor, hide them in plastic covers. Use a level to check if it's level.
• If the cabinet is made of two parts, then you can connect them by holding them tightly in a vice and drilling holes. The length of the screws is important: short ones will form a flimsy connection, long ones will stick out and spoil the look.
• Shelves can be installed in the same way as connections: prepare holes in the cabinet walls and screws. Use plugs to hide visible connections.
• If you cut out the parts yourself, then process the outer edges with a router or sandpaper.
• When installing the cabinet, make sure it is level.
• Drawers begin to be made by screwing the handle into the center of the front part (measure the center in height and length). Connect the front with the sides; they should completely “hide” behind the face of the box. The back and bottom can be nailed with a hammer. Attach the fittings (guides) to the cabinet walls at the same level: the guides should be horizontal so that the drawer does not roll around and closes easily.
• The rear wall of the cabinet, if provided, is also secured with a hammer and nails. To make it look aesthetically pleasing, the gap between them should be 7-15 cm.
• The doors are hung last. Screw in the screws at right angles to prevent the doors from sagging. Use latches to prevent them from swinging open; you can buy these devices in the hardware department.

Related article: Laying decorative stone. Video

Before work, think about where and when you can carry out certain work: cutting, impregnation of wood, painting, joining parts. Making it yourself takes longer than buying or having a craftsman do it. There may be inconvenience for household members and neighbors due to noise, the smell of paint and chemicals.

It is up to you to choose which cabinet will be in the bathroom. The main thing is that he decorates it.

Washing machine cabinet Lillangen Lillangen Ikea Ikea - review

Hi all! I caught myself thinking that I wrote reviews about almost all purchases for the bathroom after renovation, except for the cabinet above the washing machine. The most important piece of furniture that we use most often.

☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀

I bought the cabinet at the end of 2014 and it still serves us today. Excellent condition, 100% use of space. I have a microscopic bathroom, so I had to move as far as possible to take this photo :)

After renovating the bathroom, we even had to replace the washing machine with a narrower one so that it wouldn’t stick out too much.

As for the characteristics, go to the IKEA website and look at the product description:

Article: 903.807.55

Price: 6999 rubles

Color: white only

Materials:

Frame/Shelf: Chipboard, Film, ABS plastic Back panel: Fibreboard, Film Door: Chipboard, Film, ABS plastic, Film

Dimensions:

Width: 64 cm Depth: 38 cm Height: 195 cm Height of free space under furniture: 92 cm

☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀

As you can see, the closet is incredibly spacious; you can fit anything in it. 2 shelves are height adjustable (perforated).

The hinges are the most ordinary, without closers.

We also bought a Velcro hook to use the side space of the cabinet.

I also bought universal VARIERA plugs (100 pcs = 100 rubles) to close the perforations for the shelves at the outer edge.

The mirror scraper works great for the hook.

You can also use any baskets to store your shampoos/gels/masks, etc.

☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀ ☀*”˜ ˜”*☀

The weak point of this cabinet is the handles. Moisture from the hands and all condensation flows down, clinging to the handles and injuring the surface of the coating. The catastrophe is not yet visible to the naked eye, but over time it will swell more and more. The product warranty is 2 years, so nothing can be changed.

The cabinet comes with 2 hooks for towels/robes.

Overall, I'm happy with the purchase. A very convenient device for small spaces. The price-quality ratio is excellent.

Bathroom with washing machine: 5 placement options

Today it is quite difficult to find an apartment in which people still live without a washing machine. This miracle of technology significantly saves housewives time and effort, and yet, most of them have to go through various tricks in order to somehow fit the machine into a small bathroom.

We invite you to consider possible options for placing washing machines in bathrooms of different sizes, and you, in turn, will choose the most suitable method.

Replace the bathtub with a shower stall

This will make it possible to easily install a washing machine in a standard small-sized bathroom. And if you choose a high-quality shower with several additional functions (hydromassage, music, ergonomic seat), performing hygiene procedures will become doubly pleasant and you won’t even have to remember about the missing bathtub.

The area above the washing machine is thus also freed up, and here it is also important not to get confused, but to hang cabinets or shelves for accessories and a towel dryer from the wall.

If you have not yet purchased your treasured equipment, but are already thinking about how best to install the machine in a small bathroom, pay attention to narrow models that will definitely help save space. But be careful, the narrowest machines are less stable, and therefore, during washing and spinning, they make more noise and “walk” more. Therefore, it is recommended to choose equipment with a capacity of an average of 5-6 kg of laundry: such a machine will be quite compact and better in all respects.

1

Place the machine under the sink

If you can’t resist the habit of taking a relaxing bath, but still need to somehow locate the washing machine in a small bathroom - consider placing it right under the sink. Of course, this will require plumbing fixtures of a certain shape, and proper installation of the siphon vertically behind the wall of the machine, but as a result you will get a comfortable and multifunctional room.

Bath accessories can be placed on neat shelves at the end of the bath, on corner holders, or behind the screen under the bath in special containers.

3

Place the machine in a niche under the sink countertop

This option is good in slightly larger bathrooms, where the area around the sink can be somehow played up and complemented. Moreover, nothing will interfere with a free approach to the rest of the bathroom objects: bathtub, toilet, built-in closet.

When installing the machine next to the sink, you can do the following:

• Attach a beautiful curtain under the countertop that decoratively covers the drawers and the washing machine itself.

• Order furniture in advance of a certain shape and size with a space ideally designed for your car. Such a “niche” can be closed with doors, or remain open.

3

3

Hide the machine in a closet with a boiler or shelves

In spacious bathrooms you can often find originally designed pantries or narrow tall cabinets, behind the doors of which detergents and cleaning products, towels, supplies of toilet paper are stored, and also equipment that, according to the customer, is completely unattractive and unnecessary for demonstrations, for example, a boiler or a washing machine, elevated to the rank of ordinary things.

2

Install the machine freely: in a corner or near a wall

Owners of medium-sized and spacious rooms can afford to install a washing machine without connecting it to the rest of the bathroom. Select the area in which the equipment will be located as ergonomically as possible and will not interfere with free movement. For variety and to make the space above the machine useful, decorate the wall with a beautiful painting, a mosaic panel, a functional or decorative shelf, or stylish towel holders.

1

Photo gallery (7 photos):

__________________________________________________

By

Where to place the washing machine in a small bathroom

The area of ​​the combined small-sized bathroom is increased due to the missing partition, so it is not difficult to find a place for large household appliances.

Let's consider several options for placing a washing machine:

• under the sink
• next to the sink under the common countertop
• in place of the bathtub, when replacing it with a shower cabin

How to combine a washbasin with a washing machine

The compactness of all furnishings is the main requirement when planning small-sized bathrooms.

In order for the machine to fit under the sink without any problems, you must:

• Purchase a narrow (36–40 cm deep) and low (up to 70 cm) front-loading model. Today, many well-known manufacturers produce special units “under the washbasin”. And some offer ready-made kits: a machine plus a sink, which is especially convenient.

Important: When purchasing a compact washing machine, pay attention to the capacity of the drum. At least 6 kg of items must be loaded into the machine at a time, otherwise its use will be irrational.

• You will also need a water lily sink with a horizontal drain. It needs to be mounted on brackets. It is highly undesirable to rest the washbasin directly on the equipment.

Tip: To protect the washing machine from splashes, you should choose a sink that protrudes 5–10 cm beyond its boundaries.

Examples in the selection of photos below:

It is recommended to install the machine directly under the sink only as a last resort. This method has several disadvantages:

• Due to the specific design of the sink, the drain and siphon become clogged more often.
• Mini-machine machines with a capacious drum can be more expensive than their full-size counterparts.
• There is always a risk of water getting on the electronics of the washing machine.

It’s another matter when the unit is placed next to the washbasin, combining them with a common countertop. Such a tandem also takes up minimal space. But it becomes possible to buy a standard machine with a large loading volume, and install a storage section under the sink.

Options for this solution in the photo:

Washing machine instead of a bath

Also a good option for small bathrooms. By replacing a long bathtub with an open-type shower stall, we get additional space on which to install a “washing machine.” In this case, it is possible to use models with both front and top loading. (see photo):

How to place a washing machine in a separate bathroom

It all depends on the size of the room. In miniature bathrooms built in Khrushchev, the only option is installation under the sink. With a larger area, it is possible to arrange it in a vertical pencil case or niche with shelves, or place it without reference to furniture and plumbing.

Interesting design projects in the photo below:

There are also quite unusual solutions. For example, you can use not the bathroom, where there is not enough space for everything you need, but the adjacent toilet. A washing machine above the toilet is a rare occurrence in our apartments, but quite possible. You can see what the design looks like in these photos:

Important:

1. The podium under the machine must support its weight when fully loaded and in working condition.
2. It is better to place the unit on a vibrating plate, which will not only reduce noise during operation, but also ensure the stability of the equipment, protecting it from jumps.
3. To avoid accidents, the washing machine is located above the tank and not above the toilet seat.
4. The drain hose must be located above the level of the drum, otherwise sewage may get into the operating machine.

Needless to say, installing a “washing machine” in the toilet is an extreme step, which is taken only if there is no other suitable place in the apartment.

Requirements for a niche for a washing machine in a closet

The cabinet for the washing machine in the bathroom must match the size of the household appliances, be highly stable and reliable. The first requirement is decisive. Typical dimensions of a washing unit are 60 cm in width and depth, the height is in the range from 85 to 90 cm. The design does not have a rear panel, which allows for unhindered water communications, drainage, and power supply. The distance between the wall and the back of the machine should be at least 10 cm. For gaps on the sides and top, 2-3 cm is enough; for furniture with doors, it is necessary to provide the same gap in the front. Taking these data into account, the final dimensions of the cabinet can be determined.

When the bathroom has a large area

Placing a washing machine in a spacious bathroom is not a problem - you don’t have to fight for every centimeter of free space and pay more attention to the design of the room. To prevent household appliances from affecting the interior style, especially if it is classic, retro, Provence and country, it is advisable to hide it in a closet or cabinet, closing it with decorative doors (see photo):

But it is best to allocate a special space for a mini-laundry. Here you can additionally install a drying machine, ironing board and hanger for freshly washed clothes.

This is perhaps the most practical solution for a spacious bathroom. To see this, just look at the photo:

Finding a place for a washing machine in the bathroom is not as difficult as it seems at first glance. And let the kitchen remain for the dishwasher, refrigerator and other large equipment that helps create culinary masterpieces.

Photo selection of designer creativity in conclusion:

When decorating a kitchen or bathroom in the same style, household appliances have to be hidden, since a rare unit can organically fit into the design project. And while small equipment can simply be put away in a closet, large equipment, such as a washing machine, is more difficult to disguise.

A special cabinet for a washing machine will save the situation. It can be either built-in or separate. Read more about the types of such cabinets and the nuances of their location in our article.

How to choose the right place

Of course, a washing machine can be installed in the kitchen or hallway, but its location in the bathroom is considered the most appropriate, regardless of the size of the room itself. Even in a spacious bathroom it is impossible to place a washing machine just anywhere, not to mention a miniature room. If you do not pay due attention to this aspect and install the unit in any free space, nothing good will happen. Firstly, the washing machine will stand out sharply, and secondly, ill-thought-out planning will lead to inefficient use of space.

The correct arrangement of items, including the washing machine, allows you to make the most of the available space to create a comfortable living environment in the room. But how, you ask, in a typical small-sized bathroom of modern apartments, that is, on 3-4 m2, can one fit a bathtub, a sink (and sometimes a toilet!), various cabinets, sets, shelves for bath accessories, and even a washing machine?

In fact, everything ingenious is simple. And in order to compactly fit a washing machine, it is not at all necessary, as some advise, to abandon a full-fledged machine in favor of a “baby” one. Let's look at the main options for placing this unit in the bathroom.

Options for placing a washing machine in the kitchen

In the kitchen, the washing machine is placed so that it fits organically into the interior and does not interfere with the use of the room for its intended purpose.

When choosing a place for equipment, they give preference to the space next to the kitchen sink. This simplifies connecting the device to communications.

We list the options for installing the machine in the kitchen.

Under the table top

The easiest option is to install the machine in a niche under the kitchen countertop. This arrangement allows you to conveniently use the equipment. However, the noise from a working centrifuge may disturb household members.

The open arrangement of household appliances is typical for the high-tech design direction. But only if all the devices are designed in the same style.

Behind masking doors or curtains

If the machine does not fit into the kitchen design, you can hide it by hanging it on the door niche. This option will reduce the noise level, but will require more space. The unit itself should be smaller in size.

Important! If you decide to hide the washing machine behind doors, make sure that they open completely and that the countertop does not block access to the detergent compartment. Otherwise, it will be inconvenient to use the device.

If there is not enough space to install a full door, but you need to hide the washing machine, use a masking textile curtain of a suitable color.

Embedding

Embedding a washing machine is the most compact placement option. With this method, the device is placed in a cabinet, and the door is hung on the body of the machine itself.

A significant disadvantage of this option is the higher price of built-in washing machines.

Installation in a cabinet

Another functional placement option, suitable for large kitchens. In this case, the equipment is installed in a special kitchen cabinet, possibly together with a drying apparatus.

Such installation and connection require special skills, so it is better to entrust them to a specialist.

For built-in washing machine

Built-in appliances have no external gloss, providing freedom and highlighting the selected furniture. A cabinet for a built-in washing machine has its limitations, because its dimensions are predetermined:

• The standard model is essentially a vertical cabinet with shelves no more than 1.1 m high, which is installed above the device.
• The horizontal design is a kind of pencil case that can have any length, encircling the kitchen. The “height” of the cabinet is only 40 cm, this option is convenient for people of average height and shorter.
• The corner solution looks extraordinary and allows you to use free space, although the design features do not allow you to fully use it.

Related article: PPE caps: is it worth using?

If mirrored doors are involved in the design, then they are separated into a separate group of cabinets; the appearance of the bathroom is so transformed. Mirrors create the illusion of space, but are demanding to maintain.

Furniture for built-in appliances is usually made to order, so you can choose excellent cabinet placement options, making the entire space work.

Types of cabinets for washing machines

The type of cabinet is chosen based on the availability of free space, size and type of washing machine. Here is a description of the main types of cabinets.

According to the material of manufacture

When choosing a material, first of all, take into account the humidity in the room where the cabinet will be installed, as well as the weight of the washing machine.

Advice. If you plan to install the cabinet in the bathroom, use moisture-resistant materials. Then the furniture will last longer.

Cabinets for washing machines are made from:

1. MDF. A good choice for kitchen furniture, but a bad choice for the bathroom. When exposed to moist air, the joints quickly deform and the cabinet loses its appearance.
2. Tree. This material is also not suitable for rooms with high humidity. A wooden cabinet can be installed in the kitchen, hallway or separate laundry room.
3. Metal. An unusual and practical solution for installing a washing machine. The metal box can be supplemented with doors made of tempered glass.
4. Plastic. The advantages of this material are low cost, resistance to moisture and fungus, and a wide range of colors. Disadvantage: fragility.

By installation method

There are three main installation options depending on the selected room and location:

1. Hanging structure. Mounts on the wall in the bathroom, kitchen or toilet. Most often, such a cabinet is chosen for cramped spaces, when there is simply no other place for the machine.
2. Floor-standing. The most common and convenient option. This design allows you to hide communications and also accommodate shelves for household chemicals.
3. Cabinet-pencil case. This option is suitable for a kitchen, bathroom or laundry room when the washing machine and dryer are installed one above the other.

By design

The most popular types of cabinets:

• corner - the best option for the kitchen;
• built-in from floor to ceiling with 2-3 sections is suitable for a spacious kitchen or bathroom;
• narrow with an add-on (the machine is located at the bottom, and the cabinet with shallow shelves is at the top) suitable for installation in the kitchen, hallway or bathroom;
• horizontal floor-mounted, combined with a sink and shelves - this option is optimal for small bathrooms.

To size

When determining the size of the cabinet, they are primarily guided by the size of the selected washing machine model and the type of loading (front or vertical). It is convenient to make several shelves for household chemicals in the interior space of the cabinet.

Accommodation

Cabinets including a washing machine are arranged in the hallway, in the kitchen, in a spacious restroom (this sometimes happens). The easiest way to do it is in the bathroom, where the approach to communications for connecting the machine is easier. The location of the cabinet is determined against the wall, in the corners or where there are niches or idle space. You can abandon the large bathtub in favor of a vertical shower to accommodate shelving. Cabinets decorate and hide problem areas.

Related article: How to install a canopy over a bed in the bedroom?

The use of corner cabinets successfully plays up the space, rounding the room at the top, creating the impression of spaciousness and comfort.

Cabinets will hide pipes and plumbing fixtures. Even a narrow washing machine can be hidden under a lily pad sink. The cabinet will help to combine them and place hygiene products in convenient proximity to the water. On such a cabinet it is appropriate to use glass and a mirror on the doors.

Niches for linen

If you decide to order or build your own cabinet for the washing machine, do not forget to provide space for dirty laundry and detergents. This will reduce washing time and simplify the use of the device.

There are several options for placing a niche for linen:

• install a large laundry basket above the washing machine in the closet;
• equip a niche for linen on the right or left side of the horizontal cabinet;
• use a laundry hanger above a machine installed on the floor.

If space allows, install several additional shelves in the cabinet for washing powder, conditioner, and bleach. Then everything you need for washing will be stored in one place.

Niche for washing machine | Renovation ideas

Contents
I want to fence off the washing machine in the bathroom by making a wall to the right of it up to the ceiling, and above the machine, perpendicular to this wall, attaching a ceiling, like a shelf, with corners. all made of foam blocks laid with tiles. Please tell me whether this is feasible, whether the choice of material is optimal and whether the design will be vibration resistant. Thank you.

Wolstenholme, September 20, 2011 Tell friends Subscribe to the weekly newsletter “Renovation Ideas”

Similar questions

Experts answered the question

Best answer

Interesting offers

Other questions on this topic

• HELP! Partition made of Ytong aerated concrete blocks in an apartment with brick walls and a finished plasterboard ceiling
  In the apartment “from the builders,” these same builders “forgot” to put up interior walls. At the moment the situation is this: there are walls made of Poromax bricks, plastered with almost sand (it falls with terrible force), there is a screed on the floor, there is...

  September 14, 2011, 2:51 pm•12 replies• 1 expert reply• reply

• Tell me, good people, where to order inexpensive, high-quality stretch ceilings?
  A new apartment without finishing, almost everything done with my own hands, but I don’t have the strength left to do the ceiling, and I don’t have much experience either, preferably not for long, I really want to move, recommend someone who has already done it))

  September 12, 2011, 11:08 pm•2 replies• reply

• Dismantling old partitions and installing new ones
  Good afternoon, friends! The repair work is in full swing. Tell me, the wall in the room /sibit/ is being demolished, 4 meters long and 2.70 meters high. The craftsmen calculated that it would be 24.8 square meters and are installing a new partition from gypsum fiber board ,together with a built-in wardrobe 30.7 m...

  August 29, 2011, 07:20 pm•3 replies• 1 expert reply• reply

• I can’t decide on interior ceiling lighting
  Good day. We started making renovations in our new apartment. Now it's time for the ceilings. Our ceilings will be suspended in the center, and along the perimeter there will be a plasterboard box. I really wanted to make interior lighting, but the builders told us that...

  August 28, 2011, 5:36 pm•3 replies• reply

• Who took down the partition between the balcony and the room?
  The house is monolithic brick, write if anyone knows in which houses these partitions CANNOT be demolished?

  August 27, 2011, 10:51 pm•25 replies• 6 expert replies• reply

ideas.vdolevke.ru

Column of washing machine and dryer in the kitchen

A column is a way to install a dryer on a washing machine. It saves free space, which is especially important for small apartments.

This installation method requires special fasteners, which are included with the equipment or purchased separately.

Fasteners are mounted on the body of the washing machine and dryer and installed on top of each other. Equipment is set strictly according to level. The stability of the structure must be absolutely reliable and not raise the slightest doubt.

Attention! The washing machine weighs more than the dryer, so it is installed from below. The floor must be level and durable (preferably concrete).

The column is assembled outside the cabinet or niche and then pushed inside. The installation process requires special attention to the network cables and hoses so that they are not pinched when moving.

Sockets and sewer drains are left accessible; placing them behind appliances is not recommended. A gap of at least 7 cm at the back and 3 cm at the sides is left behind the equipment in the column.

Another possible option for assembling the column is to mount the dryer on the wall above the washing machine.

Installing such large equipment as a washing machine into a cabinet requires certain knowledge and experience, so it is better to entrust the work to a specialist. Disguising equipment allows you to organically fit it into any style of decor and use the space to its maximum advantage.

Service premises in apartments are not characterized by excessive space, which must be used as rationally as possible. The tall cabinet in which the washing machine will be placed has compartments in the upper part that can be closed with doors. They can store small-sized household items, household appliances and other items. The lower part of the cabinet is also closed with a single or double door.

Materials and tools

Such modules are not provided in a standard kitchen set; they are usually made to order according to an individual project. If the room is already equipped with furniture, then in the process of purchasing materials you should take care of selecting identical facades and laminated chipboard. The design of the cabinet is relatively simple; special steel corners are used to give it the necessary strength during assembly.

The cabinet for the automatic washing machine built into the kitchen unit is made at home from individual parts. Sawing of the module walls is ordered at a specialized section of a shopping center that sells building materials. Facades, fittings, and awnings are selected from the goods available in the store’s assortment in accordance with a pre-prepared list.

The automatic washing machine, for which a cabinet is made, has standard dimensions. The module is manufactured using the following tools:

• electric drill with a set of drills;
• mains or cordless screwdriver with bits;
• a set of metalwork tools;
• tape measure, length of steel ruler and pencil.

Recommendation: when carrying out work, you should adhere to the previously developed drawing. Transfer dimensions to parts from graphic documents with high accuracy.

Preparing elements

For ease of assembly operations, at the initial stage it is necessary to mark and drill mounting holes. A large cabinet for an automatic washing machine has hinged doors and drawers. On the side walls, using a ruler and a square, it is necessary to determine the attachment points of the canopies and mechanisms that ensure the movement of the boxes.

The parts are connected to each other using special furniture screws: confirmation screws for a hexagonal internal key. At the points where the elements meet, holes are drilled with a diameter of 6 mm and a depth slightly greater than the length of the fastener. When all module parts are ready for installation, we transfer them to the prepared place in the kitchen. All furnishings that may interfere with the work are removed from the area.

Assembly order

The final stage is the most difficult and responsible; the cabinet for installing the automatic washing machine must be strong enough. The module does not have a bottom, and the unit is located directly on the floor. Sequence of assembly operations:

1. We install the side walls vertically and, using confirmations, connect them with the lids and horizontal partitions.
2. We install a reinforcing wall at the bottom.
3. We fix the back wall, made of painted fiberboard, using self-tapping screws and a screwdriver.
4. We put the drawers in place, screw and adjust the doors.

The cabinet is assembled, all that remains is to move it into place, install an automatic washing machine in it and connect it to the water supply and sewerage system.

The unit must stand strictly horizontally, otherwise it may move during operation and touch the walls.

With the correct selection of materials and high-quality assembly, the module will fit perfectly into the kitchen design.