Do-it-yourself adjustment of BLUM furniture hinges

Adjusting BLUM hinges

Adjusting BLUM hinges yourself is quite simple, especially when using CLIP top and CLIP top BLUMOTION hinges.

Depth adjustment

is done using a support screw on the hinge arm, but different series of hinges use different principles. The CLIP top and CLIP top BLUMOTION hinges have stepless screw adjustment (Fig. 1). When the screw rotates, the position of the facade changes. And to adjust the depth of the MODUL and CLIP hinges, you need to loosen the fixing screw, set the front to the desired position and then tighten the fixing screw.

Width adjustment

is done using a second screw on the hinge arm, and the principle is the same for all series of hinges.

For height

It is not the hinges themselves that are responsible, but the strikers, and the methods of adjustment also depend on the design of the striker.

When using straight strikers, adjustment is made using an eccentric located in the center of the striker; Access to it is provided by a special hole on the hinge arm, as shown in Figure 1.

For cross-shaped planks there are 2 types of design: with and without an eccentric. In the first case, the adjustment is made in a similar way to straight bars, but the eccentric is not in the center of the bar, but on one of its “ears”. Keeps without an eccentric are adjusted by loosening the fastening screws, then positioning the front manually and fixing the fastening screws (Fig. 2).

Figure 1: CLIP top and CLIP top BLUMOTION with straight striker.

Figure 2. MODUL and cross-shaped striker.

You can always find detailed information on the selection, characteristics, design, installation, dismantling and adjustment of furniture hinges and other BLUM products in the catalog, the electronic version of which is available on our website.

Source of the article: https://fierashop.ru/info/stati/regulirovka-petel/

Adjusting kitchen cabinets. How to quickly and easily align cabinet fronts.

After intensive use of the kitchen, there is a possibility that the facades will need to be leveled. In simple terms, adjust the hinges on kitchen cabinet doors. By the way, in kitchen cabinets, not only the hinges in the doors are adjusted, but also the fronts of the drawers. In general, all these issues are related to the adjustment of fittings. We decided to write an article in which we will describe in detail what fittings are used in kitchen units produced by the ENLI factory, and how the fittings are adjusted by professional furniture assemblers using specific examples. Let us remind you that for any advice on kitchens and assistance in choosing a custom-made kitchen, choosing accessories, contact our branded kitchen salon in Odintsovo (village of Yudino shopping center ODEKS) address here

Adjusting the BLUM AVENTOS lifting mechanisms

The final and very important stage of installing the lifting mechanism is its adjustment. Both the appearance of the headset and the ease of use when opening and closing the facade depend on the adjustment. Since the adjustment of the BLUM AVENTOS lifting mechanisms is carried out not only to position the facade, but also to adjust the power of the power mechanism to suit your facade.

Power adjustment is available on all types of AVENTOS and is carried out on the power mechanism itself. Adjustment of the facade in height, width and depth is carried out either on hinges (HF, HK-XS) or on levers (HS, HK, HK-S, HL).

Lifting mechanism for kitchen facades: description, selection tips

The furniture fittings market has long become an independent phenomenon and very profitable for the manufacturers of the mentioned devices.
Of course, not everyone can afford to purchase newfangled additions for internal filling, however, the lifting mechanism for kitchen facades has long been a bestseller. The action of the required parts is based on simple mechanics, as well as pneumatics. Many of these mechanisms are also equipped with a variety of dampers, and with them closers, which subsequently allow the use of this furniture smoothly and absolutely silently. Further in the article we will look at the main types of kitchen parts that interest us.

Lifting mechanism for kitchen fronts

Adjustment of power mechanisms

After installing the lifting mechanism, it is necessary to adjust the power so that the open facade is in balance in any position. Those. did not fall under its own weight and did not “fly up all the way” without additional effort. When opened, the facade should remain directly in the place where you released it.

Power adjustment is carried out by a special screw on the power mechanism. To increase power (if the facade closes under its own weight), the screw rotates clockwise, to decrease it, counterclockwise. It is recommended to adjust the power of the power mechanism using a screwdriver. The position of the screw depends on the type of lifting mechanism.

Lifting mechanisms for the kitchen: DIY folding lift

When arranging a future kitchen, an important component is attention to detail and the functional reliability of moving mechanisms. It is on the reliability of these inconspicuous parts that the future functionality of kitchen furniture, its reliability and design elements depend. Therefore, it is important to pay enough attention to lifting mechanisms for kitchen facades.

Description and functions of mechanisms for opening and closing kitchen furniture

When arranging a kitchen, at the choice of the designer or the owner of the room, products of various shapes and weights can be used as cabinets, cabinets or other facade elements. There are many options on the market for kitchen facades of various shapes (most often rectangular and square) and different weights, which have degrees of opening and opening mechanisms. It is the lifting mechanism that ensures efficient and practical opening of the façade. The size of the facades themselves and their weight depend proportionally on its size. Accordingly, the more massive the facade and the heavier the material, the more massive the opening mechanism (closer) should be.

But how the restoration of kitchen furniture facades is carried out and how easy it is to do is described in great detail here.

You may also be interested in information about what kinds of transparent plastic chairs there are and how to choose them for your room.

Types of kitchen systems: folding, folding, lifting, rotating

Known varieties of door closers are divided into several main types:

folding facade lifting mechanisms are most often used for heavy, massive facades

folding mechanisms are often used in facades with complex geometries to open double sashes . Such elements must also have a reinforced design, since when opened, refraction of the metal parts occurs. This mechanism is more complex and consists of several components. When opened, the component parts of the façade are hidden and overlapped. Therefore, when choosing such elements, it is necessary to calculate the distance between the facades and the area of the kitchen. This method of opening facades can significantly save interior space in the kitchen. But what combination of colors exists in the kitchen and how to choose the ideal color option can be seen here.

lifting mechanisms based on the gas principle . This mechanism allows lifting at an acute angle to a vertical position and fixing the facade in a raised state. Fixation at a certain stage is impossible due to the design (only with the help of the physical efforts of the lifter). However, some models are equipped with stepwise adjustment of the opening of the facade and fixation in certain positions. Such stops are considered one of the most reliable. But what a façade for a 45 cm dishwasher can be and what it looks like can be seen in the article at the link.

rotating products can change the angle of inclination of the facade, while significantly saving space above it. They are most often used when constructing high-rise facades at great heights and in compact kitchens, where preserving usable space is of paramount importance. But this information will help you understand how to install an electric oven and what reviews there are.

The video provides a detailed description of how the device works:

How to choose a lift for a furniture door

In order to choose a high-quality and reliable lifting mechanism for the kitchen, you must adhere to several rules:

types of lifting mechanisms . Based on the size of the cabinet, its weight and overall dimensions of the facades. The larger the size of the facade and the higher its mass, the more massive the lifting mechanisms should be. So popular among reinforced devices are gas struts, which can easily lift massive facades made of heavy wood. When choosing a mechanism, it is necessary to choose reliable mechanisms that can experience a constant load of several kilograms;

The mechanism manufacturer sometimes plays a decisive role in the selection of quality products. Thus, products from German and Austrian companies are very popular, which provide a guarantee for the number of operations and a service life of several years. However, such products also cost 40-80% more than products from Russian and Chinese manufacturers, which negatively affects their popularity. Most often, high-quality and reliable door closers are purchased for use on facades that are opened most often, and cheaper options are purchased for opening on rare cabinets and cabinets;

The kitchen space also plays an important role when choosing a lifting mechanism . The larger the size of the kitchen and its area, the more freely you can use the facades and the easier it is to choose a mechanism. The smaller the size of the kitchen, the more complex the design of the lifting mechanisms, which will combine several elements that are subject to mechanical destruction and failure during operation, for example, furniture hinges with a closer;

the stylistic design of lifting mechanisms is uniform and is not an important factor when choosing . However, when installing a designer kitchen, different colors of facades, the color of the cabinet and the appearance of the product play an important role in the choice. Chinese manufacturers boast different colors of the case and mechanisms.

You may also be interested in information about what retro Provence style kitchens exist.

Manufacturers and prices of fittings for cabinet fronts: Blum, Glass, TBM

The most popular manufacturers of lifting mechanisms on the domestic market include:

blum

Grass is an Austrian manufacturer of lifting mechanisms, which has in its arsenal the entire range of well-known types of closers, which are sold in the middle and high price segment. Such mechanisms are slightly less popular compared to German competitors due to their lower distribution on the market, but such products are not inferior in quality, and the manufacturer offers a similar 3-year warranty on its products. In addition, the price of door closers is somewhat lower compared to the Germans and is about 2.5 thousand rubles per set.

TBM is a domestic manufacturer of furniture fittings and door closers. The products are of good quality and high wear resistance. Most types of door closers of different shapes and design principles are presented on the market, and the cost of the products is 30% lower than their foreign counterparts. The manufacturer provides a warranty on its products for 1 year. In practice, cases of failure before the manufacturer's warranty expires are rare.

An important component of the reliability of the entire kitchen are the lifting mechanisms of kitchen facades, often called closers. These products have different shapes, functionality and operating principles, so for an effective choice you need to know these nuances.

Front adjustment

Adjusting the position of the facade is necessary to set the correct gaps, compensate for design and installation errors, and to obtain an even pattern of facades throughout the entire set.

The façade can be adjusted in three planes: depth, height and width. Adjustment ranges and methods differ for different types of lifting mechanisms.

AVENTOS HF adjustment ranges

for the upper facade:

depth: +3, -2 mm;
width and height: +/- 2 mm.

For the lower facade:

Adjustment is carried out using the upper (for the upper facade) and middle (for the lower facade) hinges.

for HS, HL, HK and HK-S series lifting mechanisms

on all planes +/- 2 mm. Adjustment is carried out using levers.

AVENTOS HK and HK-S

Front adjustment AVENTOS HK-XS

carried out using loops in the following ranges:

depth: +3, -2 mm;
height: +/- 2 mm;
width: +/- 3 mm.

Installation of hinges.

Clip top 120° hinges without spring.

Clip top medium hinges

First we install the hinges on the upper facade. In the case of wide fronts - these are hinges Clip top 120° without spring for Aventos HF - 70T5550.TL, if the upper facade is narrow aluminum frames, then the hinge is 72T550A.

This is a drawing for installing hinges for wide facades, regardless of whether the hinges are top or middle.

Then we install the middle hinges on the lower facade. For wide facades, the 78Z5500T hinge is used. For narrow aluminum frames - hinge 78Z550AT.

Adjustment feature of AVENTOS HF

A feature of adjusting the folding lifting mechanism is the need to set the length of the levers. If the length of the levers is incorrectly set, the facades in the closed position will not be in one straight line. If after installation the facades do not stand up straight, you need to lengthen or shorten the telescopic arms, as shown in the image, after which you need to fix the position of the arms.

You can always find up-to-date information for ordering, designing, installing, adjusting and dismantling lifting mechanisms in the BLUM electronic catalog, which is available here.

Source of the article: https://fierashop.ru/info/stati/regulirovka-aventos/

About Blum

Bloom Files

Contacts Blum

Adjusting BLUM furniture hinges

In the process of manufacturing cabinet furniture, it is almost impossible to completely eliminate errors when fitting and assembling furniture, so the final stage of furniture installation is adjusting the facade. The adjustment is necessary to set the correct positions of the facades relative to each other and align the gaps between them.

Adjustment ranges

Adjustment of hinged facades occurs using furniture hinges and is possible in three planes:

Most popular BLUM furniture hinges allow adjustment within the following ranges: +/- 3mm in height; +/- 2 mm in width; +3 and -2 mm in depth. Depending on the design and model of the hinge, the ranges may vary.

Blum furniture fittings for the kitchen: installation and adjustment of lifting mechanisms

Kitchen fittings from Blum are the reliability of an Austrian manufacturer. The company was founded in 1952 by blacksmith Julius Blum. His first products are attachments for horseshoes. Further - more: the Austrian businessman began to produce hidden hinges for furniture and a special system for drawing out drawers, allowing the product to be pulled out one hundred percent without difficulty.

Since the 70s, the former blacksmith has opened companies all over the world, starting in Europe.

Features of Blum fittings for kitchen cabinets

Accessories - comfortable operation of the headset. The company's product range is varied - from lifting devices and removable hinges to pull-out systems, guides and accessories for bar counters.

All items are of different configurations. Different types of furniture hinges are made to suit every taste: texture, color and shape. The highlight of Bloom's kitchen fittings:

full access to the contents of the upper cabinet due to the introduction of a lifting mechanism;
silent opening and closing of doors;
adjustable door opening angle;
soft, silent closing of drawers.

Blum fittings - smooth movement, highest quality workmanship and long service life - are aspects that distinguish products from their competitors. The products are comfortable, practical and durable.

Video: complete set and individuality of kitchen fittings

Advantages and disadvantages

High-quality products actually have no defects. Its advantages:

hinges with closers are equipped with a shock absorption system - soft closing of the door regardless of its weight;
lifting products with precise settings - the door is fixed in any position;
hinges - easy installation without special tools;
durability of fittings, quality of parts.

The only downside is the high cost of the product.

It is better to purchase fittings for 200,000 opening cycles at a higher cost than mechanisms for 50,000, but cheaper.

Aventos lifting parts

The Aventos series are mechanisms that allow you to open any facade without effort and, if necessary, leave them in a suitable position. Lifts do not require kitchen cabinet handles.

Aventos products differ:

HF—folding lifting model, suitable for high-hanging cabinets with large facades.
HS—folding products with 3 levels of adjustment smoothly lift the facade cover above the body, which saves kitchen space.
HL—vertical door lift.
HK - a rotating mechanism that lifts the door and leaves it in a horizontal position, often used in cabinets installed under the ceiling.
HK-S is a small model of a rotating product for small and corner drawers.

Lifting parts of the Aventos series can be equipped with additional systems that improve their characteristics.

Models are developed for wood facades and structures made of iron profiles.

Installation of the products is not difficult.

The main parts of the mechanism are attached to the internal side walls of the solid wood kitchen unit using a screwdriver. A part of the film with the inscription “attention” is removed and the iron part is pulled out.
Slip-on mechanisms are attached to the façade from the inside. The door is inserted into iron parts and secured.
Covers are placed on the main parts of the mechanism.

The rest of the lifting systems are installed in a similar way.

Clip Top Details: Hinges

Hinge system - Clip Top products - small-sized, strong parts on kitchen cabinet doors. Shape - any size that ensures convenient operation with frequent use of the cabinet.

cliptop—a model with or without springs, opening at a huge angle, for facades made of various materials (wood, alloy, glass);
modul - economical mechanisms with three-dimensional adjustment and different opening angles (90 and 170°).

To install the hinges, markings are carried out where the parts will be installed. Holes are drilled in places. The hinge parts are attached to them. A gap is cut out on the door and a mounting plate is inserted.

The door is hung on the cabinet.

How to choose Bloom fittings:

Tandembox: extension

The system ensures easy drawer pullout for varying load levels. Mechanisms with conventional installation that can withstand any load due to the reinforced bottom and strong iron side parts. Item categories:

drawers of different heights - N(68 mm), M (83 mm), K (115 mm);
with one or 2 railings;
built-in enlarged side parts - box side (204 mm);
internal drawers with pull-out components.

conclusions

To make your kitchen set beautiful and functional, buy high-quality components and install them correctly. Closers for kitchen cabinets will ensure smooth and silent movement of doors and extend their service life. Write your most tricky questions in the comments, I will answer them all.

	Vauth Sagel.
	Hettih.
Boyard.

Blum lifting mechanism: how to adjust

Aventos are Blum lifting mechanisms that provide the highest level of convenience when using kitchen overhead cabinets. The special design of the fittings allows you to effortlessly open even the most languid facades.

These lifts also differ in that the freedom of movement and useful space in the kitchen is not constrained by unnecessary structural elements and does not clutter up the space above the hostess’s head. We will look further at what positive properties the Blum lifting mechanism has, as well as how to simply, quickly and correctly adjust it with your own hands.

Advantages of lifting parts for kitchen cabinets

Bloom devices have the following positive qualities:

Ease of use. These devices are designed so as not to limit in any way the freedom of movement of a person working in the kitchen. During the cooking process, you can leave the facade open and not worry about it falling on the owners’ heads, because Blum Aventos provides reliable fixation.
Easy to open and quiet during the process. Easy opening plus silent closing of the façade doors is achieved using the integrated BLUMOTION shock absorption system.
Multifunctionality. Thanks to the SERVO-DRIVE and TIP-ON motion technology, handle-free opening of facades becomes convenient.
Possibility of stopping the shelf door in any position. A power mechanism that works smoothly and is adjusted to the weight of the façade allows such manipulation to be carried out regardless of the position of the element.
Unity of design of the lower cabinets and upper cabinets. The presence of horizontal gaps describes the external appearance of the furniture and in no case must be cut by vertical “slots”. When using Blum Aventos lifting devices, you can choose the appropriate position to suit the appearance of both upper and lower cabinets.

Subtleties of adjustment of the Aventos HF power mechanism

To set up the Aventos lift to stop in any position, follow the short instructions:

Insert the special attachment into the adjustment groove.
Turn the element using a screwdriver (set to low mode), monitoring the position of the slider relative to the adjustment scale, thereby loosening or tightening the mechanism. Carry out the action until the opening/closing of the doors does not stop in any position.
Make sure that the slider on both mechanisms supporting the facade is in the same position.

How to adjust hinges and fronts?

The Blum lift option procedure involves 5 main steps:

Preliminary adjustment of 2 pairs of loops (top, middle). This will help install the facades evenly along the body with similar gaps. Since this is just a preparatory setting, tweak it “more or less.”
Next, manually adjust the position of the facades so that all doors are in a strictly parallel position. Please note that the latch on the telescopic lever must be perpendicular to the lever itself.
Having fulfilled the previous two conditions, close the latch and check whether the facades are level. If not, use an awl to return it to its original state and re-align the doors.
Latch the mechanism and check the elements for opening and closing.
In the final step of the option, work on the top bottom hinges again, adjusting them until the fronts are in perfect position.

Now, having read the usual instructions, you understand how to adjust the Blum “Aventos” lifting mechanism for fixing kitchen cabinet fronts.

Types of door closers

Kitchen closers are classified according to installation location and type of design. We will deal with the installation locations later; as for the design of the mechanisms, they are divided into 2 directions - spring-oil and gas. But relatively recently (in catalogues) spring-oil models began to be classified as lifting mechanisms.

Purpose and functions

As already mentioned, the main task of any closer is to ensure silent and smooth closing of cabinet doors. In advanced models, the function of holding the doors in a certain position is also built in, and the ability to adjust the opening angle of the sash and smooth adjustment of the stroke is considered “aerobatics”.

There are many models of door closers, but they all have the same task – smooth and quiet closing of doors.

Operating principle

There are several designs of mechanisms and the operating principle of each of them is different. We will discuss existing systems in detail later. But if we generalize everything, then in each closer there is a certain rod that holds the door and ensures its smooth closing.

Smooth movement of such a rod is ensured by a spring or a chamber filled with oil, polymer or air. The mechanism can be activated both for closing and opening the sash, although in the second case more complex, multifunctional systems are used.

The operating principle of a diagonal closer.

Lifting mechanisms

Lifts are installed on doors that either lift up or fold down. They are installed extremely rarely on swing doors. If previously such fittings were installed only on luxury furniture, then with the development of technology and not without the help of Chinese friends, these elevators are already available on every second set.

The cabinet with a lifting door system looks original and is very convenient to use.

But not all lifts are the same; they are distinguished by the principle of operation of the mechanism:

Spring mechanisms are the most affordable option. Here the door is attracted or repelled by a system of steel springs. The mechanics are not complicated and these models work well. A relative disadvantage is that the doors are either in a closed or open position; they cannot be fixed at an intermediate stage;

Despite its simplicity, the spring design allows for adjustment.

Spring-oil - the mechanism design of these models is somewhat different from the previous version; here the spring is enclosed in a capsule filled with oil. This solution provides additional smoothness;

The simplest spring-oil model is considered to be a diagonal lift.

Gas lifts - the pneumatic version of lifts is less common. Air acts as a softening substance here. The basis of the mechanism is a chamber with a piston; when compressed or stretched, the pressure in the chamber changes, which gives smooth operation;

Pneumatics should only be purchased from a trusted manufacturer; among lifts, these systems fail more often than others.

Electrical systems are considered the latest in kitchen fashion. They operate by touching the cabinet door. So far, these models are found only in the middle and upper price categories. Moreover, in the elite niche, lifts are programmed for the opening angle and door holding time. That is, the doors close without your participation, after a certain time.

According to the rules, the maximum opening angle of a door with a lift is 107º, but these rules are advisory in nature, although leading manufacturers still adhere to them.

A universal electric lift with programming capabilities is an elite product and its price is high.

Gas mechanisms

Unlike lifting mechanisms, gas closers are much simpler. When the door closes, it presses on the piston, the air in the gas chamber is compressed and the blow is softened. Such systems are activated only during the last phase of closing the cabinet.

The easiest way to install a surface-mounted gas closer is on cabinet doors.

The dimensions of gas closers are small; they either cut into the cabinet wall or are installed on furniture hinges. Now they have begun to produce models in which the shock absorber is not air, but an elastic polymer filler. In terms of reliability and cost, air and polymer closers are similar.

The weak point in this fitting is the constant compression pressure. That is, when the doors are closed, the mechanism is in tension and straightens only when opened. As a result, the average operating time of a gas closer does not exceed 3 - 4 years, although the low cost and availability of replacement elements are encouraging.

Polymer inserts on modern gas shock absorbers are affordable and easy to change.

Adjusting hinges on cabinet doors: rules, photos and video instructions

Sometimes, when everything looks completely smooth after assembling the furniture front, most often you have to smooth out the body and adjust the hinges on the cabinet doors. If everything is clear with the box, you only need to correctly align or hang the cabinet once using a building level, then with the hinges everything is more difficult. With constant use, you will have to adjust the position of the shutters using control screws at least once a year.

A lubricated and adjusted hinge will last at least 10 years

Installation, installation, adjustment of Aventos HF

Installation, installation, adjustment of Aventos HF, everything is extremely simple, read the instructions.

Folding lift.

Rotary lift.

Rotary lift for small facades.

Compact lift.

Folding lift.

Vertical lift.

AVENTOS HK

AVENTOS HK-S

AVENTOS HK-XS

AVENTOS HS

AVENTOS HL

Aventos with TIP-ON.

Rotary lift with TIP-ON.

Rotary lift for small facades with TIP-ON.

Compact lift with TIP-ON.

AVENTOS HK-S with TIP-ON

AVENTOS HK-XS with TIP-ON

Dish dryers

Single-level dryers Inoxa

Single-level stainless steel dryers..

Single-level dryers with Chrome coating..

VIDEO: Installation of AVENTOS HF

Check out the Video to help you understand the installation process ahead. How to install Aventos HF? It's quite simple. We will walk you through the installation step by step from design to adjustment. In general, no special knowledge, abilities or skills are required. In essence, installing an HF lift is like a child's Lego set. If you follow the instructions, everything will work out. We have creatively revised the instructions for installing BLUM and believe that the information given to us is completely sufficient, but if you have any doubts or there is not enough information, use the official BLUM catalog.

Popular manufacturers

Door closers are fairly common elements of modern kitchen furniture. There are now quite a few varieties of such products on the market, among which several high-quality manufacturers can be distinguished:

The Austrian company Blum produces one of the highest quality products of its kind. The cost of such components can vary widely, depending on the specific purpose of the closer.
Vauth Sagel. German products of this kind are distinguished by their highest reliability and popularity, which has led to their distribution virtually throughout the world.

There are many other manufacturers of kitchen closers, which allows you to choose an average price-performance ratio to solve certain problems. If you are not convinced which products are best to give preference, then entrust the choice to experienced specialists.

Installation of Aventos HF

1. Now let’s look at the Aventos HF installation. After you have installed the power mechanisms, install telescopic arms, as shown in Figures 1 - 2 - 3, they will also be supports for the upper facade during installation. Please note the warning.

2. Then we place the upper façade on the telescopic arms and snap the upper hinges onto the strike plates, Figures 4-5.

3. Take the lower facade and snap the middle hinges onto the counter strips of the upper facade, Figures 6-7.

4. Now we snap the telescopic lever mount onto the strike plate of the lower façade of the upper façade, Figures 8-9-10.

5. Carefully lower the facades by the handle, down, and see what happens, Figure 11.

Adjusting the power mechanism of Aventos HF

We adjust the power mechanism, insert a special attachment into the adjustment socket; there is an adjustment scale on the mechanism, where you can see the position of the slider. By turning the nozzle, this must be done with a screwdriver at low speed, we weaken or strengthen the mechanism.

We ensure that the facades stop in any position. The slider on the scale of both devices should be in a similar position.

Adjusting hinges and fronts

1. We make preparatory adjustments to two pairs of hinges: upper and middle, ensuring that the facades are installed exactly along the body with similar gaps. What and where to turn is shown in the figure. Don’t forget - this is a preparatory adjustment, equalize “more or less”

2. Next, we align the facade with our hands, as shown in the figure, ensuring that both facades are in the same plane. It is necessary that the latch fig. 1 on the telescopic lever was perpendicular to the lever.

3. Snap the latch Fig. 2, open and close the facades, if there is no plane (the facades are humped), use an awl to pry the latch into its initial state (snap it off) and re-align the facades.

4. Latch again and check, raising and lowering the facades.

5. Adjust the upper and lower hinges again until the fronts are in perfect position.

First, we install the power mechanisms on the cabinet body. It doesn’t matter what kind of facades you have, MDF, aluminum frames or something else. First you need to drill two holes with a diameter of 5 mm and a depth of at least 5 mm. This is done in order to fix the Aventos HF mechanism.
The red in the figure shows the protruding edges, which will fit into the drilled holes.

Let's start marking the holes. kH is the height of the cabinet, H is the distance from the top edge of the cabinet, which is what we need. If the body height is from 480 to 549 mm, then H is calculated using the formula:

H=kHx0.3-28mm,

if the body height is from 550 to 1040 mm, then according to the formula:

H=kHx0.3-57mm

Let’s say our case height is 720 mm, which means we calculate according to the 2nd formula.

All dimensions are ready, now we drill holes, secure the mechanism and screw in the 4th self-tapping screw with a diameter of 4 mm and a height of 35 mm.

How to install a gas lift

The gas lift is attached to the sidewall and facade. In particular, a round part with a sleeve to the inside of the sidewall, and a hook-shaped oblong fastener to the facade. The nitrogen sleeve itself snaps onto them. I always install gas lifts with the cylinder facing up.

We lay the façade with the inside on top. We mark 90 mm down from the hinge side, 22 mm from the edge. This is the center of fastening of the hook-shaped part, the hook into the inside of the facade. Size 22mm for cabinet side, 16mm thick plus clearance. It is important not less than 16 mm.

We lay it on the table, the inside is the top, the side. We mark 270 mm from the top end down, 10 mm from the front end inward. This is the center of fastening of the first screw on the round fastener. Two more are located above and below inside the part, relative to the first screw.

After installing the gas lift, do not forget to install a damper. Invoice or mortise does not matter. It will soften the impact of the facade against the end of the cabinet during closing. Without it, the cotton will be decent. Enough to make you jump on the couch in the other room.