How to assemble a sofa yourself?
Here we will give you step-by-step instructions for assembling the sofa.
Work must begin with a drawing. To make a sofa assembly drawing, you need:
- come up with and sketch out on paper the type of product you need;
- measure the place where you will place the sofa;
- choose a model that appeals to you in all respects;
- prepare everything you will need during the work process.
The assembly of a corner sofa consists of a seat and a backrest, which form a berth in the unfolded position. The corner sofa has 3 components that form the letter L. The sofa is held up by 4 legs, but you can use casters instead of legs.
Before studying diagrams and drawings, it is necessary to determine the dimensions of the product. Classic sofa dimensions are 100*220 cm in assembled position. When unfolded, the dimensions are 140*220 cm.
Initially, the component parts of the product are completed. When connecting them, it is unacceptable that in the assembled position the seat protrudes beyond the armrests. If you unfold the sofa, the distance between the frames should not be less than 10 mm.
Why do it yourself?
By agreeing to assemble a corner (or straight) sofa yourself, you will significantly save money compared to buying a ready-made model in a furniture store. This time.
You control the manufacturing process yourself from start to finish. You choose the materials and calculate the dimensions yourself. Therefore, you are not limited to standard offers from manufacturers. That's two.
And three: you gain invaluable skill and work experience. If you were able to assemble a sofa, then you don’t have to be afraid of anything; simpler pieces of furniture can be assembled literally with the power of thought.
Assembling a sofa yourself saves the family budget
But the coin also has a flip side. Having seen a beautiful corner sofa in the nearest furniture store and wondering how to assemble the same one yourself, you must correctly assess your strengths. If your ability to handle a saw or jigsaw, as well as an electric drill, is at the level of a “teapot” - either practice on simpler projects (chair, table, shelf), or turn to professionals (by the way, a secret - order a sofa from private furniture may also be cheaper than buying in a store).
Required tools and materials
Certain materials are provided for the drawing.
For example, a drawing of a wooden frame is not suitable for craftsmen who make a metal frame. For greater rigidity, it is recommended to use lathing, which can be made from industrial slats or made by yourself. Wood, chipboard or plywood are suitable for lathing. In particular, to assemble a sofa you need tools such as a miter box, a square, a ruler, a screwdriver, a stapler, and a stationery knife.
For foam rubber, you must first dilute the glue. Stock up on self-tapping screws, nails, staples and wood screws. Once you make sure you have everything you need, you can safely get to work.
Often, in the manufacture of homemade sofas, a book mechanism is used, which uses springs. Finding affordable materials for assembling such a mechanism is not difficult. Spring sofas, assembled from high-quality materials, last a long time.
Characteristics of the sofa "Monaco"
The “Monaco” sofa has a corner design, which is convenient in terms of use, thanks to which it will easily fit into any room. The sofa looks original in design. The armrests have built-in shelves on which you can place various accessories, or use them as magazines. The sofa, in addition to its main function, can be used as a sleeping place. To make it convenient to unfold, manufacturers install a reliable mechanism. It is built into the sliding part, so there should be no questions about how to assemble the Monaco sofa. Furniture from this series can harmoniously fit into any interior, because various coating options are used.
Back
An important point in assembling a sofa is the presence of a strong back. Its assembly is carried out in a similar way to the base of the frame. The backrest is secured with metal corners to the base. You choose the backrest angle yourself, based on your preferences.
Step by step assembly
Having prepared all the necessary tools and materials, you can proceed directly to assembling the corner upholstered furniture. The main thing is to carefully study all the diagrams and instructions, which in most cases come complete with any furniture design . You should not neglect this stage, so that later you do not have to “work on mistakes.”
If we are talking about assembling a homemade product, then the home craftsman will definitely need to prepare a detailed drawing of the future furniture indicating all the parameters and design features. Having a detailed diagram at hand makes it much easier to assemble a corner sofa, and the risk of making mistakes is minimized.
Let's look at how to assemble a sofa with a corner design step by step using the example of a factory product.
- First you need to unpack all the components of the corner sofa. It is advisable to let them lie down for a while so that they “straighten out” in the new conditions.
- The first step is to attach the supporting parts to the armrests using self-tapping screws. The supports must be fixed on the roll-out part of the upholstered furniture.
- Special support rollers must be screwed to the section that will be pulled out.
- The components must be fixed in such a way that they fall on both the corner and the main part of the structure.
- Next, using the conformat, the corner part is connected to the side of the upholstered furniture.
- The assembled structure will need to be well fixed with the corner compartment.
- The next step is to carefully connect the back and the main section of the sofa structure, again using self-tapping screws. It is advisable to use parts with parameters 3.2x32.
- Now, using the side bolts, you need to secure the armrests, as well as the box of the first section. The main component will need to be fastened to the corner component using a conformat.
- After this comes the final stage, during which you will need to attach the sides of the sofa to the wall located in the back.
7 photos
It is necessary to take into account the fact that the process of assembling furniture is influenced by the mechanism provided for in its design. If the system is too complex with a large number of small and moving parts, it is better to entrust the work to professionals. This way you will protect yourself from serious mistakes that could ruin your brand new upholstered furniture.
Using the scheme of actions described above, you can qualitatively assemble not only a factory-made, but also a home-made corner sofa. The main thing is to construct all the workpieces correctly and do not forget about their mandatory grinding.
Installing the base
A base is installed on the completed box, which has the shape of a rectangle. It is attached to the frame using self-tapping screws or glued with glue. The fasteners must be hidden in the material by making holes for self-tapping screws. In the future, this will help to avoid compromising the integrity of the material.
How to disassemble a sofa book
- The classic design is quite simple: the seat pulls out, and the backrest is placed in its place, creating a sleeping place. Models may have sides. A modified form is a Eurobook, in which the base is a box for storing linen.
- To disassemble, you need to lift the seat and inspect the inside of the sofa. The fasteners can be in plain sight or hidden under the upholstery. If the second option is discovered, you will have to detach the upholstery and then reattach it after assembly.
- To begin with, the side panels, if any, are disconnected.
- Then the seat fasteners are unscrewed, and the backrest is removed last.
- In the Eurobook, the seat and backrest are a solid mechanism; only the roll-out mechanism can be disconnected.
Formation of the inner layer
The required seat thickness is 100 mm. It consists of a piece of foam rubber with a thickness of 40 mm and 20 mm. The foam rubber is cut out in accordance with the base drawing. Place the layers on top of each other and glue.
We recommend reading:
Do-it-yourself upholstery of upholstered furniture: photos of ready-made options and examples of modern design
- Do-it-yourself upholstery (upholstery) of chairs: 100 photos of ready-made options and unusual designs
- Do-it-yourself furniture decoupage: review of the best techniques, original ideas and beautiful design (140 photos)
For increased comfort, the products are made multi-layered. Foam rubber is the main layer. Before covering, padding polyester is placed in the top layer for softness. This material gives the required shapes and rounds corners. It is better to layer layers of foam rubber with felt to avoid pressing through the seat.
Advantages of using a sofa bed in the interior
If we compare an ordinary corner sofa and a sofa bed, then the more useful and functional furniture, of course, will be the sofa bed. It creates additional sleeping space where it is sorely lacking. This applies not only to small apartments, but also to children’s rooms in private homes.
During the day, the sofa bed is a wonderful place to relax after a working day and have a cup of coffee, and at night it turns into a comfortable sleeping place. Thanks to its angular design, it fits perfectly into any interior.
This is one of the most popular mechanisms today.
Eurobook corner sofas are very popular and in high demand among numerous customers who need good sleep and comfortable rest.
According to the scope of application, corner sofa beds are divided into several types.
- Sofa beds for children's rooms. They have a more compact appearance and a simplified layout system.
- Corner sofa beds for office spaces. This type of sofa has a comfortable seating area.
- Standard sofa beds for living rooms and bedrooms.
Such sofas can easily withstand significant loads, have an attractive appearance design and do not take up much space even in a small apartment.
The big advantage of corner sofa beds is the combination of innovative design and functionality. In addition to beauty and convenience, they create additional storage areas, which is especially important in small apartments.
The Eurobook sofa bed has a very simple and easy transformation, which will be available for independent use even by a small child.
Upholstered furniture stores offer a huge selection of corner sofa beds. The catalogs present sofas with all types of folding mechanisms.
You can be sure that your Eurobook sofa beds will last for many years.
The folding mechanism provides an additional spacious drawer under the seat for storing linen and other bedding, which saves space in the house.
The price of corner sofa beds will depend on the material you choose. Companies can offer the discerning buyer not only budget options for upholstered furniture, but also exclusive models and new items.
Corner sofa with shelf for books and magazines
The transformation system is simple and does not contain parts subject to frequent breakdowns.
The sofa folding mechanism is simple and long-lasting.
Assembly steps for a specific model
Detailed assembly instructions depend on which model of sofa you like. Corner sofas are the most popular options. We invite you to review the instructions for assembling the Atlanta sofa.
Features of assembly by design
A traditional corner sofa consists of two or three parts, representing seats and backrests. The long part can be folded out.
Before assembling a sofa for installation in its intended place, you should familiarize yourself with its design. As mentioned, it comes in right-handed and left-handed orientations, and these sides can be of different lengths.
After determining the above, you should join the parts of the sofa, insert the included fasteners into the required grooves and secure them well.
Experts advise first installing the larger element of the sofa in place, and only then attaching a second, smaller one to it.
You should determine how the transformation of your sofa occurs. The assembly of the folding part depends on this.
There are three types of mechanisms:
- The Eurobook sofa is assembled in this way: the backrest is raised vertically, and the lower part of the furniture is pushed towards it. The layout is done by pulling this part towards you and lowering the backrest.
- To assemble the “dolphin” model, you need to slightly lift the front part of the sofa, press and move it a little back and a little down. When unfolding, pull the existing fabric loop located at the bottom of the seat. When this element is fully extended, it needs to be lifted up.
- The “accordion” design requires moving the seat towards the back, that is, back, for assembly. This seat will pull the sofa back connected to it, the latter will be on the same level with the first and will fit freely into its place. The sofa of this model may have two or even three parts, but only one of them will fold out.
High-quality corner sofas transform into sleeping places very easily, without much effort. You need to act clearly and harmoniously, then this upholstered furniture will serve you for a long time and faithfully.
How to assemble a corner sofa, watch the video:
28Nov
A corner sofa can perform various functions, which makes it indispensable in the interiors of small apartments. Finding a suitable corner sofa on the website www.nedorogaya-mebel.ru will help you get acquainted with their various designs, layouts, orientation (left or right) and other characteristics. The second question for the buyer is whether it is convenient to place it indoors. How to assemble a corner sofa will be suggested by the following methods for decomposing and assembling some models.
The simplest sofa is a corner side sofa, usually used as a kitchen corner. In addition to decorating the dining area, they also represent a convenient and modern solution for kitchen furniture. Corner kitchen sofas consist of two or three seats with backs, which are assembled like a construction set on the left or right side. To connect them, it is enough to dock the individual parts and insert the fastening pins into the grooves.
Corner folding sofas can be equipped with a different transformation mechanism, which is why their assembly method may differ. Usually one part of the sofa is not folding and complements the sleeping area formed by its folding part. The design can be solid or separate with attached blocks.
The design of the “Eurobook” consists of three parts – two sofas and a triangular insert between them, made in the form of a table. To unfold such a sofa, you need to pull the lower part towards you and lower the backrest into the free space. The collection of the “Eurobook” is carried out in the reverse order of the steps performed.
Corner sofas of the “Dolphin” design usually consist of two parts: central and side. The side part is motionless, and the central part folds out, forming a spacious sleeping area. By grabbing the hidden loop located at the bottom of the seat and pulling it towards you, you can pull out the platform in which the folding mechanism is located. The mechanism is disassembled by lifting the loop up and towards you. In this way, the sleeping bed is assembled flush with the side part. To put the structure back together, simply press on the front of the sofa and slide it under the seat.
The accordion design can have two or three components. As in the previous sofa model, here one part remains motionless. By pulling the seat towards you, you can move it forward. At the same time, the seat will pull the folded backrest along with it, which will lie flush with it. By sliding the seat back you can assemble such a sofa.
A comfortable room, be it residential or office, cannot be imagined without a comfortable sofa. Designs competently developed by modern manufacturers allow you to install this upholstered furniture in any part of the room.
Corner sofas are especially popular these days, as they do not clutter up the space of the room and allow you to use it as rationally as possible. You can purchase high-quality furniture of this type on the website https://veneto.ua/divany/uglovye.
Corner sofas can be assembled in different ways, and the nuances of assembly depend on the design features. You can learn more about this from the article.
Corner sofa Atlanta
How to assemble a sofa with your own hands?
Take timber and boards. In this case, you will ensure the durability of the sofa. If you take plywood or chipboard, you will save a lot. The thickness of the chipboard should be 16 mm; we do not recommend using thinner material. Assembly execution stages:
- Complete the drawing. Calculate the length of two modules.
- Develop a diagram for assembling the sofa, indicate in it the positions for connection.
- Assemble the board frame and secure it with self-tapping screws.
- Place cross bars in the center of the top and bottom parts.
- Sew up the fiberboard bottom of the box.
- In the same way, make the second part of the sofa, a corner insert in the shape of a square.
- Align and connect the 3 resulting parts.
- Make a backrest consisting of modules and connect the parts together.
- Attach the hinges to the back assembly parts and install the seats on them.
- Fill the sofa with 10 cm thick foam rubber.
- Upholster the frame with fabric.
Use a furniture stapler to complete the trim. We recommend starting sheathing from the corner, moving towards the center. The material must be nailed to the back from the bottom up. Then we do the same with the sides. The last thing to cover is the seat.
The variety of design features of sofas is so great that everyone can choose one that suits them in appearance, functionality, dimensions and ease of manufacture.
If desired, you can assemble any version of the sofa, which will be no different from the store-bought one. The most important thing here is to study the technology of manufacturing parts, delve into the assembly process, allocate free time and simply have a great desire to make beautiful designer furniture.
Possible nuances
As with any task, assembling a sofa may not go according to plan. To avoid possible incidents, it is necessary to take into account all possible nuances in advance so as not to damage the product.
Some people are taking on such a task as making a corner sofa on their own for the first time. Therefore, for the first time it is better not to buy expensive material. For example, if you purchase genuine leather and cut it incorrectly or attach it to a foam frame, the product will be damaged before the work is completed. The first time it is better to practice on simpler and cheaper upholstery.
Corner sofa - fits perfectly into the interior, saving free space.
It is important to check fasteners, guides and sliding mechanisms in the shop before installation. Otherwise, there is a risk of installing a low-quality part that will ruin all the work done. During the assembly process, protruding pieces of the material with which the sofa was upholstered may form. This is normal and you can correct the situation using a construction stapler or tape.
Blankets for decorating upholstered furniture are made from bamboo, fleece, viscose, acrylic, cotton, silk..
It will be much more convenient if you place all the necessary tools near you in advance. So, for example, you can easily reach the tape if the edge of the upholstery has come out or behind the nails. It may happen that at first glance the frame structure seems smooth, but later defects will be visible from a different angle. To avoid such a situation, you should not immediately hammer in the fixing bolts too much; it is better to do it half-heartedly, and only then finish it.
Making a regular or corner sofa is quite easy.
It is important to treat every detail with care. Any sudden movement can damage the structure, especially at the upholstery stage. If there are mechanisms of different actions, then their installation is first accompanied by studying the instructions and selecting the correct fasteners.
Photo of the sofa assembly
Model "Flagship"
The assembly diagram is quite simple, it consists of only 3 steps:
1) Take bolts 90 millimeters long, washers and M8 nuts and connect the armrest (section 3) to section 1 on the right, and section 2 on the left.
2) Take bolts 50 millimeters long, washers and M8 nuts and connect sections 1 and 2 together.
3) Insert the last section No. 4 into the niche of section No. 2.
Sofa design
It is a corner, its dimensions are 2.55 m * 1.6 m. Most of the corner is a soft sofa with a niche for laying out a sleeping place. The continuation of the armrest is the coffee table. In the smaller soft part there is a niche for linen.
The frame is made of dry timber and plywood. The additional mattress is mounted on a metal frame with wheels so that the bed can be easily pulled out. This is important, since the roll-out niche may become loose over time if it is made of less durable material.
The table, which is attached to the side, is made of MDF board, mounted on metal furniture pipes. This ensures good fixation.
The sofa is the smaller part of the sofa; it is equipped with a niche for bedding. A lifting mechanism with a gas lift and a lock easily lifts the soft part, providing access to the niche. The back of the sofa consists of attached soft pillows with removable covers. The set includes 2 decorative pillows.
Scheme and drawings
Have you thought about how to make a corner sofa with your own hands but need drawings? We recommend reading this article to the end. At home, this task is not so difficult to accomplish. You will need to decide on the design features and prepare drawings. Assembling your sofa according to a carefully designed drawing of all its details will be much easier and faster.
The assembly diagram should describe the dimensions of all structural parts: armrests, frame bases, backrest, seat, shelves, drawers. It should be as simple and understandable as possible.
Without significant experience in such matters, experts do not recommend taking on the creation of complex models with many drawers, shelves, and bar compartments. Experienced craftsmen do not recommend using expensive materials to create a sofa yourself for the first time in your life.
With armrests
Popular mechanisms
Small
Rounded
