How to assemble a computer chair yourself, step-by-step guide. Assembling a computer and office chair

Luxurious leather office chair with soft seat and back

An office chair or computer chair on wheels is a convenient and effective replacement for conventional furniture. The soft seat and back reduce the load on the spine, and the casters eliminate the need to get up to take a step to the next table with a shared telephone. Save on inviting an assembler - find out with us how to assemble a computer chair yourself.

Compact office chair “Bridge” purple

Assembly area and tools

The first thing you need to do before assembling your gaming chair is to prepare the area for assembly. Ideal if you have a room with plenty of free floor space. If space is limited, such as in a crowded room or small office, try to clear a space that is a little larger than two chair boxes if you put them down.

If the seat, cushions and backrest are in the packaging, do not remove it immediately so as not to stain the upholstery during assembly. In general, you can also assemble it on cardboard or foam spacers from the box with the chair. Lay out the elements so that they do not interfere with you when assembling other components.

The second step is to prepare the tools for assembling the chair. Typically, the delivery of the chair includes a blister with fasteners and tools for assembly. Most often this is an L-shaped screwdriver with a cross on one side and a hex on the other. But there are other options, for example, just an L-shaped hexagon.

The complete tool is designed for buyers who do not have their own tool at home or in the office, but need to assemble the chair right away. There is no need to talk about any convenience or comfort when working with it. Therefore, it is better if you have a Phillips and flathead screwdriver, and a set of hexagons. It is also advisable to wear gloves to avoid damaging your hands.

Adjustment

Typically, chairs have a standard configuration consisting of five parts. But the mechanisms and methods of regulating them differ individually, depending on the model. So, we sit down in a chair to find out whether it will be comfortable to sit in it, whether the gas compression system works when sitting down - how much the chair lowers under your weight. While sitting, we try to spin the chair as quickly as possible until it stops.

We adjust the height of the seat: we sit down and, using the lever located under the seat, raise and lower the chair so that the hands placed on the table are at an angle of ninety degrees relative to the position of the body. And your legs should touch the floor with your entire foot. During work, the back should be in an upright position, and during moments of rest, tilt it back slightly so that the muscles and spine can relax.

You need to focus more on your feelings, on how it is most convenient for you to sit and work at the table. If, when landing and rising from a chair, it moves behind you, this means a malfunction of the gas cartridge in the mechanism.

Design Features

A high-quality office chair is a complex design, in the development of which various specialists took part - engineers, doctors, designers. The main elements are as follows:

1. Back and seat. Provide back support and seat comfort.
2. Permanent contact. A component that connects the two previous elements and is responsible for changing the position of the backrest.
3. Five-pointed cross. It is the base on which the entire load falls.
4. Rollers. Elements at the bottom of the cross, responsible for the ability to easily move the chair without damaging the floor covering.
5. Gas lift. A shock absorber that guarantees the elasticity of the structure and allows you to adjust the office chair in height.
6. Armrests. They significantly increase the comfort of the seated person, especially if they are supplemented with soft pads, but this element is variable, and not all models are equipped with it.

What unites all types of computer chairs is the ability to adjust the position of the seat and backrest.

Despite the external similarity of all office chairs, they differ in types and models. The adjustment mechanisms also have their differences, which are shown in the table.

How to assemble a computer chair yourself, step-by-step guide

The advantages of modern computer chairs are difficult to overestimate - a comfortable design provides anatomically correct back support, reduces the load on the spine, and eliminates tension in the neck muscles. The only inconvenience is that any office chair is delivered disassembled, and it is not always possible to resort to the services of an assembler. In most cases, this is not necessary - understanding how to assemble a computer chair is quite simple and on your own. First, you will need to understand the principle of the design and the functionality of each element, and then study the instructions, which are always supplied with the furniture. The description of the assembly process and useful tips collected in the article will allow you to carry out all the manipulations without extra effort, while saving your family budget.

Why do you need play furniture?

Modern humanity can no longer imagine its existence without IT technologies and modern gadgets. Coming home from work or after school, you want to escape from the everyday problems of the outside world and, sitting comfortably in your favorite chair, immerse yourself in the virtual world of games and entertainment. In order for such a vacation to bring complete pleasure, and damage to health to be minimized, it is necessary to properly arrange the playing area.

A standard computer chair is not entirely suitable for these purposes, despite the fact that it is also quite comfortable. It is perfect for short work at the computer, but not for hours of gaming gatherings. A special gaming chair is an improved office chair, which, thanks to its comfortable and reliable design, ergonomics and high functionality, will give you not only comfort, but will also allow you to completely immerse yourself in a real world of amazing adventures.

Checking elements and configurations

Before assembling the chair, inspect it: there should be no defects in parts, the delivery set must be complete. Even small defects can significantly complicate assembly or make it completely impossible.

Due to a defect in the crosspiece and the lifting mechanism, the gas lift does not sit tightly and the chair wobbles.

Please read the instructions for assembling the chair carefully. In most cases it is included in the package. But if you don’t find it in the box, take a look at the manufacturer’s website. Follow the instructions steps. This could be the end of the article, but the nuances are just beginning.

Preparation

Conscientious manufacturers include a leaflet with instructions for assembling an office chair in each package. But you can easily lose it, or simply not understand the diagrams and description of the process. Let's start installation.

We are preparing the place where we will assemble the future executive chair so that all the components are at hand. We carefully unpack the box so as not to damage what is inside. Let's check if all the parts are in the box:

• seat;
• back;
• crosspiece;
• armrests;
• gas lift;
• rollers;
• top gun;
• mounting bolts.

If everything is in place, we move on to the second stage of assembly.

Step one. Screw the reclining mechanism to the seat

Manufacturers recommend that it takes two people to assemble the chair, but often there is no one to help. It doesn’t matter, you can handle it on your own. First of all, screw the reclining mechanism to the seat with the lever - this must be done using the appropriate fasteners from the supply, if it is not already screwed on at the factory.

For most manufacturers, this fastener is located on the right side of the seat. The back of the seat is where the holes are located to secure the backrest. If your backrest reclining mechanisms are already screwed on, then move on.

Seat and top gun

The next step is to connect the seat and the rocking mechanism, which makes the chair soft and flexible for the position of the back. This device regulates how much the backrest will recline under the influence of weight and at the same time fixes the backrest to the seat. To understand how to assemble an office chair, let's look at the screws included in the package.

Typically, there are three types of screws of different lengths:

• 3 pcs. short;
• 2 pcs. average;
• 6 pcs. long.

Four holes for fastening are visible on the bottom of the seat, which means, logically, three short screws are not suitable for us. We remove two large screws for the armrests, the rest serve as fastening of the top gun to the seat. The depth of the holes is the same, but the design of the mechanism differs in the design of the front and rear fastenings.

Let's move on to the installation itself:

1. Turn the seat over with the holes facing up and apply the top gun so that the holes match.
2. Using the key that is included in each configuration, we tighten the long screws on the back side, where the back will be, and the middle bolts on the front side.
3. It is recommended to tighten all four bolts one at a time, and then tighten them evenly in the same order.

Common breakdowns

As noted above, an office chair is a rather complex device and any of its structural elements can fail.

Damage to the cross

The problem with this element may be destruction at the junction of the beams. The material from which the cross is made is important here.

As a rule, the base is a hollow structure into which a polypropylene pipe of suitable size and cross-section can be inserted. It, in turn, must be rigidly fixed to the base and the damaged beam.

In order to dismantle the crosspiece of an office chair, you need:

1. Remove the rollers. As a rule, they do not have a rigid fixation and are quite simply removed from the mounting sockets. To illustrate the process, it is recommended to watch the video:
2. Dismantle the piastra. Fastening to the seat is done “on a cone”. Disconnection from the gas elevator is carried out by tapping on the attachment point. The correct process for disassembling an office chair is shown in the video:
3. Remove the retaining clip located in the recess on the top of the hydraulic lift.
4. Knock out the gas lift to repair or replace the five-arm.
   The process technology and dismantling device are shown in the video:

Destruction of the swing mechanism

If the chair does not hold the “horizon”, then the problem is most likely in the destruction of the swing mechanism.

Fastening to the seat is done with four screws using a shaped screwdriver. The element is dismantled as follows:

1. The bolts that secure the rocking mechanism from the seat are unscrewed
2. The gas lift is knocked out of the device mount.

This element is made of metal.

It should be noted that most chairs originating from the Middle Kingdom are not suitable for domestic spare parts. This concerns, first of all, the swing mechanisms (size discrepancy).

• Chinese mechanisms: 200 x 200 mm.
• Domestic: 200 x 150 mm.

In order not to re-drill holes when replacing an element, we suggest using adapter plates. How it looks assembled can be seen in the figure below.

Air chuck failure

The pneumatic cartridge of the chair is a two-chamber structure filled with air. When you press the adjustment lever, the valve stops the flow of air between the chambers.

If, when pressing on the valve, the gas lift rod does not extend, it means that the integrity of the piston, seal, etc. is compromised.

The dismantling process is described above. To clarify the process, watch the video about replacing the gas cartridge on office chairs:

A fairly common cause of gas lift failure is the bending of the adjustment lever, which does not allow pressing on the cartridge valve. In this case, the repair can be easily carried out independently: you need to bend the lever to its original state.

Video: Assembling the Prestige office chair

Previous

ArmchairsDo it yourself soft chair

Next

ArmchairsStep-by-step making of a hanging chair with your own hands

How to reupholster a chair with your own hands Reupholstering furniture with your own hands is a labor-intensive, long process that requires a wealth of experience and skills. For this reason, many simply throw away old furniture, not realizing that it can be restored with their own...

Step-by-step making of a hanging chair with your own hands Coziness, comfort, peace in the house largely depend on the furniture. The strictest requirements are imposed on its selection. Furniture should be comfortable, safe, reliable. Appearance and style also play a huge role...

DIY bean bag chair Familiar furniture is not always comfortable when you want more comfort and coziness. An alternative to traditional furnishings can be a bean bag chair. It features soft fabric...

A chair-bed for children: what it is and how it works. Parents who are solving the problem of arranging a room for a child can opt for such an ergonomic option as a folding or roll-out child chair. The practicality of this piece of furniture is generally recognized,…

How to repair a computer chair with your own hands A computer chair is an integral attribute of a modern person’s workplace, without which it is difficult to imagine a study or office. The convenience of a computer chair is expressed in its ergonomic and functional…

How to fix an office chair if it falls down? Not only in the office, almost every home has a computer chair. It is comfortable to sit at the computer on. But chairs often break down, because we use them every day. It happens that some serve...

Stylistic decision

The color, style and design of a product can accurately tell about its owner. Such characteristics provide information about a person’s well-being, as well as his demandingness. For example, an additional element in the form of a lumbar cushion or headrest shows the luxury of the chair. This option is more likely to be purchased by a manager than by an ordinary employee.

If we touch on the topic of practicality, it is better to choose dark colors so that dirt is not so noticeable. There are many shades of brown, gray and black, so you can choose the right one. If you want to stand out, show your originality and individuality, you can choose bright colors or choose a print that suits the style of the room.

We must not forget about the combination of furniture and interiors. For example, bright shades will look good in informal settings - printing companies or advertising agencies. And monotonous and discreet options are perfect for the strict classic style of the office.

Build quality control

You can check how well the chair works quite simply with the help of simple steps. The serviceability of the lifting mechanism is the first criterion that must be considered. When testing, you need to sit in a chair, press the piastres lever - under the influence of the person’s body weight, the seat will lower. When the desired level is reached, the pressure on the lever should be stopped. If you pull it up and stand up from the chair, the seat will return to its original position.

Silent and trouble-free operation of the lift is the second criterion that will indicate a successful assembly. For greater comfort, you can adjust the position of the backrest and start using it without doubting the strength of the finished product. Correct adjustment of a computer chair is very important, because comfort when working at a desk affects the activity levels of employees, and an uncomfortable backrest position causes fatigue in the spinal region.

There are times when office furniture needs to be dismantled. A user who has personally carried out the process of assembling the structure will easily figure out how to disassemble the chair. It is important to remember that after long-term use of computer chairs, the parts in them can become compressed - it is better to do the work using a power tool. It may also be necessary to use physical effort, so it would be a good idea to pre-treat the fasteners and joints with technical oil.

If something goes wrong when assembling a computer chair, it is better to use the services of professionals - they will not only quickly and efficiently complete all the work, but will also provide a guarantee for it.

Checking the swing mechanism

Adjusting the lifting mechanism

Possible difficulties

It happens that when disassembling office furniture it is inconvenient to unscrew the short rear fastening screw. In this case, it is recommended to replace the screwdriver with a screwdriver.

If the gas lift moves away from the piastra with great difficulty, using a bronze or wooden drift will help solve the problem. It should be remembered that strong impacts may cause the plastic cross to burst.

It happens that when replacing or repairing rollers, a metal rod gets stuck in the cross. This often happens if the office furniture has never been disassembled, since over time all the fastenings become compacted. In this case, the use of technical lubricant will help eliminate the problem.

Experts do not recommend repairing a worn pneumatic cartridge. This part can only be replaced. The device contains compressed air pumped into a chamber under high pressure; its accidental release can cause serious injury to a person.

The swing mechanism is also rarely repairable. Usually it is changed immediately, but the main difficulty is that it is very difficult to find this spare part. In this case, the best solution may be to purchase a new office chair.

Before disassembling office chairs, experts immediately assess the condition of the crosspiece. Inexperienced users often change a shaky base. However, it can last for several more years. In order to secure the chair support in a stable position, it is necessary to insert a metal pin into its rod and seal the connections.

You can also repair minor damage to the upholstery yourself. To do this, you need to use a furniture stapler. Cleaning of contamination should be carried out before dismantling and repairing the product. Also, before disassembling computer chairs, they are usually vacuumed.

In order not to waste time on frequent repairs of rollers, you can install special plugs - gliders - instead. However, with them it will be more difficult to move furniture on the floor than with wheels. The plugs are attached to the sockets according to the same principle as the rollers. The use of gliders allows you to reduce the height of the chair.

In order to avoid frequent breakdowns, it is recommended to choose high-quality furniture from well-known manufacturers with a warranty period of at least one and a half years. If the malfunction is serious, it is better not to risk disassembling the office chair at home, but to seek the help of a qualified specialist.

Inconveniences during disassembly

State of the cross

Office chair gliders

Video: Assembling the Prestige office chair

A computer chair is an indispensable attribute of a modern office, study or workspace in the home. It is comfortable, versatile - adapted to different parameters and weights. The chair holds the back well, fixes posture, which makes a person less tired and reduces the load on the musculoskeletal system. Despite its reliability, the chair sometimes breaks, which causes inconvenience. One of the most common breakdowns is damage to the wheels. That is why you need to know how to remove the wheels from an office chair and replace them if necessary. Such repairs do not require special knowledge or high costs - you can do it yourself without calling a specialist.

( 1 rating, average 5 out of 5 )

How to assemble an office chair? It's not difficult at all!

Luxurious leather office chair with soft seat and back

An office chair or computer chair on wheels is a convenient and effective replacement for conventional furniture. The soft seat and back reduce the load on the spine, and the casters eliminate the need to get up to take a step to the next table with a shared telephone. Save on inviting an assembler - find out with us how to assemble a computer chair yourself.

Compact office chair “Bridge” purple