What does a “magic corner” look like?
“Magic”, “smart” or “miracle corner” is a design of two baskets that is installed in the lower corner cabinet:
- one basket is attached to the facade - frontal;
- the other basket moves inside the cabinet - mobile.
Moreover, from the outside, such a cabinet is no different from an ordinary one. But when it opens, the clever mechanism of the magic corner in the kitchen is activated:
- first, the basket attached to the facade extends and slides out to the side;
- then the second basket comes out.
This way you will gain access to the most difficult to reach places in the cabinet and easily find the item you need. Smooth sliding of the baskets is ensured by high-quality fittings (guides and closers).
There are both left- and right-hand mechanisms, so be sure to check which way your corner cabinet door opens before purchasing.
Advantages of the “miracle corner”
The name of this retractable system speaks for itself. This “miracle of modern technology” allows you to solve the problem of lack of space in small kitchens, looks stylish, and is easy to install, which you can do yourself. In general, the “magic corner” has many advantages:
- rational use of space . In one basket you can store large utensils - for example, pots, pans, a mixer, a blender. In the other - smaller ones, mugs, bowls, glasses. Thanks to this division, order will always reign in the closets, and the necessary utensils will be found in a second;
- strength - the system can withstand heavy loads. The shelf that is attached to the facade can withstand up to 7 kg, and the internal one - up to 15 kg;
- versatility, various types of configurations to suit the needs of the owners. As already mentioned, there are mechanisms with right and left opening. It is possible to equip the baskets with additional sections for small items. You can also choose the “carousel” system, in which rotating shelves are installed instead of baskets;
- ease of installation - you can install the magic corner with your own hands in a ready-made cabinet in the kitchen. You do not have to dismantle and completely change the corner cabinet;
- long service life . Good manufacturers do not skimp on the quality of material for fittings, which do not deteriorate or rust even in conditions of constant humidity and temperature changes;
- neat storage of dishes . Thanks to the clear placement of kitchen utensils, the risk of damaging fragile elements such as the Teflon coating of a frying pan or porcelain dish is extremely low. The smooth movement of the magic corner does not allow the dishes to “roll” around the basket, which prevents scratches.
- noiselessness _ Thanks to the closers, the structure moves out and back in smoothly and silently, and thanks to special latches, the baskets do not collide under any circumstances;
- can be used not only in floor cabinets. The retractable corner can be placed not only in the lower cabinet in the kitchen, but also in a wall cabinet or in cargo;
- stealth . One of the reasons why such corners are called magic is that despite the size of the baskets and the complexity of the mechanism, the magic does not reveal itself when the door is closed;
- budget. If you don’t have a lot of free money, you can select the baskets yourself and install them.
Thus, the miracle shelves can be filled to your heart's content with various kitchen utensils. Fittings and baskets are usually made of durable, high-quality steel with anti-corrosion chrome plating, so they are difficult to damage and will not bend over time.
However, keep in mind that shelves that are attached to the facade have the smallest load capacity, so it is better not to overload them.
There were also some negative aspects. For example, if the cabinet is small - less than 50 by 90 cm, then the system, although magical, will still not fit into such an instance.
Photo of a convenient storage system under the sink
Main characteristics
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
A real salvation for a tiny set is a smart kitchen corner. What is it? The structure is placed inside a box, most often a corner one, as it has greater capacity.
It consists of two baskets, one of which is attached to the base of the facade, and the second is installed inside. When you open the cabinet door, the entire structure slides out.
This idea was created for kitchens with a small area, which is understandable. However, nothing prohibits installing a magic cabinet in a large kitchen. This is very convenient in functional terms.
Peculiarities! The design is best suited for a corner cabinet. It is spacious and will accommodate larger baskets. This magical cabinet is ideal for a corner kitchen.
About magic
The magic of the cabinet begins with the fact that outwardly it does not stand out in any way, but once you open the door, everything will become clear. The main feature is that it makes it easier to find dishes. When you open the cabinet, the basket installed on the front will slide out first, and then the one inside. This way, all content will be visible.
There is no need to turn all the dishes upside down or reach into the farthest corner for the desired item. Access to any corner of the cabinet is completely open.
In addition to the main advantage, the kitchen magic corner has several more:
- Optimization and saving of internal space. Order in the kitchen will be ensured, as all utensils will have storage space. One basket can hold pots, and the second can hold small kitchen utensils.
- Easy to use and install. The magic locker is easy to install, which eliminates the need to seek help from specialists.
- Versatility. The Magic Corner is a versatile storage space thanks to its customizable options. If the design is supplemented with compartments, you can place kitchen appliances or small accessories in them.
- Strength and durability. Due to the fact that the structure is made of steel rods and wires, it is highly durable. A special galvanic coating protects the metal from corrosion and deformation. The shockproof magic corner will be an excellent place to store expensive kitchen utensils.
Reference. The design can withstand high loads - from 7 to 15 kg. This means that you can safely place heavy frying pans and pots in it without fear of the baskets breaking.
Despite the large number of advantages, the magic mechanism has one drawback. Its installation is possible if the cabinet is at least 50 cm deep and no more than 90 cm wide.
Don't worry that the baskets will collide during use. The design is thought out to the smallest detail and is equipped with a special lock. And closers ensure silent and easy sliding of baskets.
There are options for both right-handed and left-handed mechanisms, depending on where the corner is located. They are also divided into two parts, one of which does not move. Designs of this type come with the possibility of full or partial extension.
Functionality
Multifunctionality, the ability to accommodate a large number of kitchen utensils, and space saving allow us to call the corner system truly magical. The useful properties of this design include:
- storage optimization provided by the design itself - several shelves located at different levels;
- placement of heavy utensils - up to 15 kg on the bottom shelf, up to 7 kg - on the top. The magic system allows you not to reach for such heavy objects into the very depths of the closet, but simply take them out of a pull-out shelf or basket;
- content protection . The design has excellent shock resistance, and more often than not, good closers that will keep the most fragile dishes and even electrical equipment in new condition.
Types of corner structures
Let's look at what types there are and how they work.
Carousel
The advantage of the rotating device is reliability, no need to pull out the baskets. You don’t have to worry about the safety of your dishes and store even fragile items here.
The carousel can have 2 or 3 shelves. Different manufacturers may offer different materials: usually chrome-plated steel, wood, glass or plastic.
For convenient use of such cabinets, unusual doors with 2 accordion-type doors can be installed.
Retractable
In this case, baskets or shelves can be pulled out completely or partially. They can be of very different shapes and can have several levels.
With such a corner, it is necessary to take into account the weight of the dishes or any other items that will be stored in the corner module of the headset. If you put something heavy on the shelves, the mechanism may work and eventually break.
This design can be attached to the front of the cabinet and slide out with it.
Corner drawers
A great idea that can be implemented in almost any kitchen. But, unfortunately, very few manufacturers today offer such ready-made solutions.
But you can find a craftsman who will make such boxes to order. And if you have skills in working with furniture, then you can try to make them yourself.
Self-production will also be relevant for those who already have a headset installed, but without this wonderful invention. The easiest way to install a rotating section is like a carousel. It will be more difficult with a retractable mechanism.
Modern manufacturers of kitchen sets offer similar solutions at the kitchen planning stage. Large companies such as IKEA, Maria, etc. have carousels and retractable baskets.
Source
Design options
- with full extension. When you open such a cabinet, the shelves slide out completely and the body remains completely empty. For this option, you will need a certain amount of free space - so that baskets or shelves have room to move out, so it is recommended for a spacious kitchen;
- with partial extension. This is also a common and practical option. The shelves attached to the front will roll out completely, while the internal shelves will roll out halfway, but will remain in the closet. This will save some space, while you will be able to reach items located in the inner basket;
- carousel. An interesting option is when, when the door is opened, the shelves do not slide out, but rotate around their axis, like on a display case. This makes it convenient to store round objects: pots, jars, plates. Sometimes such cabinets do not have a door, which adds a little elegance to the interior. Of course, it is not pots that are stored on such an open carousel, but glasses or wine glasses. The maximum number of shelves is three;
- combined. A combination of different types of sections, for example, one shelf moves out and the other rotates around its axis;
- vertical. The most compact option that can be placed in a narrow high rack. Vertical shelves are made between cabinets, next to the refrigerator or wall. It is convenient to store jars of spices, oils, cereals, etc. here.
Depending on the mounting method:
- the system is attached to the cabinet door;
- the system is attached to the cabinet body.
Although the different designs are all made of chrome-plated steel, they can all look completely different in appearance. For example, if the magic corner will hang above the sink, then you can choose narrow baskets and make the door out of glass. In this version, the content will also play the role of decoration. You can put beautiful jars with spices in the first row.
And the vertical magic corner itself looks completely different when compared with its analogues.
Design advantages
First, let's figure out what such a corner is and what's magical about it. It consists of two baskets hidden inside the cabinet, which slide out when opened. One of the baskets is attached to the base of the facade. And the second one fits inside. Both of them are complemented by special hanging elements.
When the corner door is closed, they are located at the far counter. And only when it opens, the nets stop opposite the doorway, moving out. It turns out that when you open such a cabinet, first one drawer comes out of the grid, followed by the second.
The design was created specifically for tiny kitchens in which it is impossible to accommodate a full-fledged set. A magic corner will allow you to significantly save space, while placing all the necessary things in their places.
The second advantage of such furniture is that it is extremely easy not only to use, but also to install. You can install such a structure yourself, without the help of paid specialists.
In addition, the design allows you to make full use of all the free space in the cabinet itself. After all, very often, when folding things, we use only the front part of the shelves.
At the back, there is either free space left, or things that no one uses are installed. In the case of a magic corner, the opposite is true and all parts are involved - both the base of the structure and its hanging parts.
Sometimes the basic structure is complemented by special compartments for storing dishes, accessories, cutlery and various household items. And in the main compartment you can store pots and pans of different sizes or deep bowls.
This type of design is very durable, which means you can not be afraid to store even expensive and fragile dishes in it.
Due to the fact that the main parts are made of steel rods and wire, the structure will serve you for as long as possible. And to protect metal parts from corrosion under the influence of moisture and temperature changes, galvanic coating is used.
In addition, it is able to withstand quite large loads. The baskets can hold from seven to fifteen kilograms. This means that inside you can place not only plates, but also heavy cast iron pots and pans.
For maximum comfortable use, the magic corner is divided into two main parts - right and left. The location of the moving part depends on where your corner is located. One of the sides does not move during this installation. Designs of this type come with the possibility of full or partial extension.
Retractable mechanisms are also different. But it is best to choose ball ones. Their main advantage is that they do not create additional noise. In addition, the drawers slide out softly and smoothly.
What fittings are used?
The fittings play an even more important role than baskets or shelves, since it determines how smoothly the extension will occur, and how long the magic corner will last. When choosing such a system, you need to pay attention to three points :
- Ball mechanism . Thanks to it, sections can be opened so silently that no one will even notice it. This is a simple and fast mechanism with which nothing can happen even over time - if we talk about high-quality models.
- Closers . This detail ensures smooth movement of baskets and shelves. This need arose due to the fact that the shelves are heavily loaded, so careless handling of them can lead to wear of the mechanism. Closers prevent this problem. In addition, they protect the dishes - even if you push the basket hard to close, the closer will work and roll it up as smoothly as possible.
- Retainer . It is this that prevents the shelves from touching and colliding.
If these three elements of fittings are of the highest quality, then the miracle corner for the kitchen will last for decades.
Features of choice - what you need to know about magic
What should you consider when choosing a magical corner? The first is its purpose. Baskets can be made with parallel rods and fine mesh. If you need a model for storing large dishes and cutlery, choose a corner that has a basket with a mesh and a basket with large rods.
Second, pay attention to the extension mechanism. You know that a design can have a full or partial mechanism. The first option is suitable if you have enough space for extension next to the corner. The partial mechanism will save kitchen space, and such a corner will look more like a traditional cabinet.
Mechanism installed with sink
Third, consider the maximum weight of your cookware. The inner basket can withstand an average of 12-13 kg of weight, and the second hanging basket can withstand about 5 kilograms. So it is better to place large dishes inside, and lids and small appliances on the door. Unfortunately, you won't be able to choose a model with two internal baskets. To ensure that your model serves you for many years, do not overload the cabinet door with heavy objects.
Another nuance that is worth clarifying is the installation of a magic corner under the sink. For small kitchens, this arrangement is the only right choice. It is worth taking into account the fact that the presence of pipes and siphons will complicate the process of “checking out/moving in” of the inner basket. Therefore, you should choose models with full extension and a maximum door opening of 95 degrees. They fit perfectly into the dimensions of a corner cabinet and help organize space in a small room.
What should you consider when choosing?
- Select. Focus on reviews of a specific manufacturer and the features of your kitchen set.
- If you chose a left-hand mechanism, make sure that the cabinet door opens to the left; and if it is right-handed, then the door should open, respectively, to the right.
- Decide on the purpose of the corner - its type and configuration depends on this. If you plan to store large items there, then large mesh baskets are suitable; for small items you should choose a fine mesh mesh or solid metal shelves.
- It is necessary to select the mechanism of the withdrawable system itself. For small kitchens, the best solution would be a system with a partial extension, but for a large cabinet in a large kitchen - a corner with a full extension mechanism.
- If you decide to buy and install a smart corner yourself, make sure that it comes with clear, detailed instructions.
- Do not forget about the maximum load weight. If the baskets are overloaded, then over time the entire mechanism may fail. It is better to place heavy items on the bottom shelf.
- In addition to weight, you need to pay attention to the dimensions of the system and the existing floor cabinet. The structure must fit completely, but at the same time not create obstacles to movement or inconvenient access to the refrigerator or kitchen door when extended. Do not forget that the minimum width and depth of a floor cabinet for a magic corner for the kitchen is 90 and 50 centimeters, respectively.
Review of popular models of magic corners for the kitchen
Almost every manufacturer engaged in the manufacture and sale of furniture components and kitchen accessories includes kitchen corners in their product line. The extension mechanism is not the simplest, and it is also designed for a significant load, so magic corners cannot be called cheap and accessible. However, it is quite possible to find and order at a wholesale price a magic corner worth 5-6 thousand rubles, if you focus on the assortment of factory-made China ones. But there will be no guarantees of quality and durability. Therefore, it is better to choose among models that are in deserved demand from proven and well-known brands.
Blum magic corner for the kitchen
Oddly enough, but on the Russian market the range of blooms is represented only by a system of drawers with different contents. The only thing that can be called a magical corner of Blum is the spectacular Space Corner storage system, but the principle of both the installation and the solution are far from the concept under consideration.
McMart's Magic Corner
The Dynamic Corner mechanism in the corner base of partial extension is designed for a load of 35 kg and can be classified as a classic reliable model. Available in chrome, bronze and a combined version with white and gray blind inserts.
For those looking for a magical sink nook, McMart offers the Combi`s 2 system in the form of separate island elements. At your discretion, they can be installed in one, two or more tiers at the desired height above each other.
Magic Corner Boyard
But the retractable “island” for corner kitchen cabinets manufactured by Boyard Lotus series is offered on a single height rail with two levels installed.
During installation, you can only adjust the height of the levels relative to each other, while the installation diagram is extremely simple and clear for installation in an already assembled table-cabinet of suitable sizes.
There is also a standard magic corner Boyard of partial extension of the Universe series, which can be equipped with your choice of mesh baskets made of stainless steel or gray, with a blind bottom.
Ikea Magic Corner
The universal magic corner for the Ikea kitchen can be installed in both right-hand and left-hand corner modules. You should be careful with the dimensions: the mechanism is supposed to be installed in a rather voluminous cabinet-cabinet, 1280 mm long.
Magic corner VAUTH-SAGEL
Magic corners and carousels from the manufacturer Vauth Sagel (Germany) are also deservedly popular. The black metal models of the Planero series are especially impressive.
DIY magic corner
The principle of extending the baskets of the magic corner can be reproduced in homemade structures. For example, you can make a magic corner with your own hands from four drawers, two of which move inside the corner cabinet.
The installation diagram can be shown in the drawing for better understanding.
DIY installation
When purchasing, you need to check for instructions for the corner. There, the assembly and installation process is described in the most detail and with individual features. In general, it is not anything complicated, so you can easily do it with your own hands. Typically, the sequence of actions when assembling a right-hand corner is as follows:
- Installing the support block on the inside right side of the headset.
- Attach the locking lever to the front edge and push it to the side until it clicks.
- Assemble the retractable rear frame (support, lever, ball mechanism, frame, guide slide);
- Install the guide slide;
- Pull out the retractable frame and fix it in the lever. Insert the slide until the locking sleeve clicks;
- Fix the support on the panel and attach it to the retractable frame.
In the video you can see a visual installation of a magic corner for the kitchen.
Vibo – Installation of the magic corner Smart Corner
All movements must be smooth and careful, without excessive effort, otherwise there is a risk of damaging or pinching the mechanism. The left-hand corner is assembled in the same way.
If you are not confident in your own abilities, you can contact a specialist in assembling magic corners. This way the process will go faster, and the result will be excellent.
Required tools and materials
Most often, when assembling a kitchen table, furniture panels and chipboard (laminated chipboard) are used. The main advantage of the first option is ease of use. On sale there is a pine board that can be easily drilled and sanded. You don’t need a workshop to work with it – you can assemble the table right at home. Panel furniture also has disadvantages. It has to be sanded to a smooth surface and additionally treated with protective coatings - impregnation and varnish.
Laminated chipboard is a more difficult material to work with: chips may form during cutting, and an edge will need to be glued to all open cuts. It is easier for novice craftsmen to buy a ready-made countertop made of laminated chipboard of the required size or order cutting and gluing of the edges when purchasing the material at a hardware store. Chipboard also has its advantages. These include a wide range of colors and a variety of textures.
To create a kitchen table you will need furniture fittings - fastenings and ready-made supports. Sometimes timber is additionally used. With its help, they prevent sagging of furniture made from panels. To do this, a rectangular frame is made from timber. This design is called the underframe. Its task is to distribute the stress that most affects the corners of the furniture. Then the tabletop is placed on the frame. The timber is also used as table legs.
Tools you may need are a drill, a screwdriver or a screwdriver. The legs are often attached to the top of the table using self-tapping screws. Sometimes metal corners are used as fastenings.
What can you keep in a magic corner?
Fantasy is not limited here:
- pots, pans, baking dishes, baking sheets, plates, glasses, glasses, cutting boards;
- small household appliances: blender, toaster, mixer, meat grinder, juicer, etc.;
- detergents, cleaning products, laundry detergents;
- food, spices, preservation;
- kitchen textiles - tablecloths, towels.
You can store anything. The main thing is not to exceed the kilogram limit set by the manufacturer.
Magic corner under the sink
Under the kitchen sink there is often a lot of free space that can be used to store various detergents, washing powder, rags and sponges.
You can also put a retractable system with drawers here - just so that it does not touch the siphon and pipes. It is recommended to install a fully retractable magic corner mechanism and a door that opens 95 degrees under the sink.
Related article: How to choose the perfect corner vanity unit?
Do not forget that the area under the sink may have high humidity. This means that you should choose high-quality and moisture-resistant materials for the magic corner - this will help avoid corrosion in the future, extending the life of the product.
Rules for choosing and caring for a corner
The first thing you need to know when choosing a magic corner for the kitchen is its purpose. The size and shape of the baskets depend on what utensils will be stored in the cabinet. For large dishes, you can choose baskets with mesh and large rods, and for smaller dishes, vice versa.
Particular attention should be paid to the extension mechanism. If there is enough free space next to the corner, a full extension will do. If the kitchen is small and you need to save space, use a partial extension. This corner will look more like a traditional closet.
The third important rule is that you need to take into account the maximum weight of the cookware. In order for the product to last a long time, you need to take care of it and not overload the baskets. Larger dishes should be stored in the lower basket, and smaller utensils should be placed in the upper basket.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
Pay attention to the contents and packaging. All parts must be in place. The most important thing is the presence of instructions. It is not difficult to install a corner on your own, but without detailed instructions the process may take a long time.
An important nuance of placing a kitchen corner (especially in small kitchens) is its installation under the sink. Due to the small area of the room, this method is the most successful. However, you need to take into account the location of pipes and siphons: they can complicate the process of extending the baskets, so preference should be given to full extension with a maximum door opening of 95 degrees.
Such a mechanism will fit perfectly into the kitchen dimensions and will help to perfectly organize the space.
When installing a corner under the sink, it is imperative to use high-quality and moisture-resistant materials. The service life and operation of the product depends on this.
Leading manufacturers
Let's consider the most famous players in the market of furniture fittings and retractable systems:
- Kessebohmer (Germany). The fittings from this manufacturer are smooth and silent. Thanks to the Softstop mechanism, one small push is enough for both shelves to move into an accessible position. The special Anti Slip coating prevents items from sliding on the surface of the baskets when moving;
- Bloom (Austria). One of the most famous manufacturers of furniture fittings (closers, pull-out mechanisms, hinges, etc.). His own development is the Blumotion shock absorption system, which ensures silent and smooth closing of cabinets. Blum fittings for a smart corner in the kitchen can withstand up to 65 kg of weight, are highly durable and have a laconic design.
- Rejs (Poland). Produces magic corners that attach to both the door and cabinet body. Loading capacity of products: 25–35 kg;
- Vauth-Sagel (Germany). Since 1962, the company has been producing retractable storage systems, bottle holders and other kitchen accessories in different price categories: from economy to premium. The service life of the products is at least 10 years - Wout Zagel focuses on the stable operation of the mechanisms;
- Hettich (Germany). Hettich is the largest family-owned company producing furniture fittings. In addition to magic corners, they produce a variety of hinges, metaboxes, tandemboxes, dryers, containers, baskets, bottle holders;
- Boyard (Russia). The manufacturer Boyard offers a wide range of furniture components, fittings (rollers, supports, fastenings, hinges), extension systems for magic corners at affordable prices. SWIMBOX, B-box and SWIMBOX PRO systems, synchronization and full extension mechanisms ensure smooth movement of drawers and comfortable access to their contents;
- Siro (Austria). For more than 60 years, the company has been producing products that are popular in Russia. Everything about their products is perfect - both functionality and appearance. At the same time, the brand does not stop there and is constantly expanding its line. For example, several years ago, products made from rare metal alloys appeared in the collection;
- Agoform (Germany). A recognizable brand on the market. Its peculiarity is that the components are made not only of metal, but also of rubber and plastic, which ensures smoother running of the baskets and a longer service life. In addition, Agoform boasts a wide range.
When choosing a magic corner for your kitchen, take a closer look at the brands listed above - and purchase products only in trusted stores. It is not worth saving on baskets and components, since there is a risk of running into a fake at a tempting price. The service life of such a specimen and its appearance a year later will not please the owners.
Manufacturers
When choosing a magical kitchen corner, you should carefully study the market and manufacturers. Its strength and durability depend on the quality of the material, assembly and operation of the mechanism. Consider the most famous manufacturers:
- BLUM is an Austrian manufacturer of kitchen fittings. The arsenal of products consists of lifts, hinges, drawers and retractable structures. The company uses a high-quality BLUMOTION shock absorption system, which ensures smooth and silent closing of cabinets. Full extension designs can withstand up to 20 kg, and corner drawers - up to 65 kg. The products are distinguished by high quality, laconic design and durability.
- Vauth-Sagel is a German brand whose products are recognized as the best in the world. The peculiarity of the company is that it produces both economy-class and premium-class fittings. All products are distinguished by high quality, functionality and long service life. The manufacturer creates not just roomy, but also stylish smart corners that become a decoration for any kitchen.
- Hettich is a German manufacturer that offers a wide range of kitchen fittings: hinges, brackets, drawer systems and even lighting.
- Siro is another manufacturer from Austria. The company has been on the market for more than 60 years and still enjoys the trust of consumers. The brand presents not only internal, but also external fittings, helping to create a stylish interior. The use of traditional materials is a sign of German quality. However, technology is developing, and the company is not falling behind. Not long ago she launched a collection of unusual alloys.
- Agoform is a brand from Germany that produces kitchen accessories that are characterized by convenience and functionality. The manufacturer is not afraid to experiment and skillfully plays with a variety of shapes, textures and variations. The company has patented technology for working with plastic and rubber, which gives it an advantage over its competitors. The brand also has experience in applying all kinds of finishes to the front fittings, creating a fashionable and stylish design for any kitchen.
- Boyard is a brand that represents furniture fittings: handles and supports for furniture, retractable systems, mesh filling for the kitchen. Kitchen accessories are aimed at creating coziness and comfort, so each product is thought out to the smallest detail. The company is one of the few offering excellent quality at an affordable price.
- Kessebohmer is a company with a strong leading position in the market. Its galvanized fittings are known and appreciated all over the world. Famous furniture manufacturers actively cooperate with the brand, creating high-quality and durable products. All products are manufactured using special technology and undergo total quality control.
When choosing a magic corner, you should take a closer look at the listed manufacturers. The quality and reliability of their products are guaranteed.