Make an oval transformable crib with your own hands. Invisible bed

In order to optimize living space and free up space in a small apartment, you should take a new approach to the issue of furnishing. It is necessary to replace bulky cabinets, sofas and beds with compact systems - transformers. In this article we will tell you how to make a transformable bed with your own hands.

transformable children's bunk bed;
single or double bed for the bedroom;
tables-desks that turn into an easel;
changing table that transforms into a coffee table;
double bed, which after transformation turns into a single bed.

Folding bed design

Depending on the position the bed occupies when folded, a distinction is made between horizontal and vertical wardrobe beds. The prefix “wardrobe” comes from the fact that such furniture either performs an additional function (a place to store things) or imitates it. The main design elements of the wardrobe-bed are as follows:

box - made of laminated chipboard, pine plywood or planed poplar boards;
stock - can be used factory-made or self-made;
lifting mechanism - it is recommended to purchase a German or Italian one.

The main components of the box are the supporting shelf and the plinth. You can do without the back wall, but from an aesthetic point of view it is not good. You can solve the problem by hanging a picture.

Preparation for the manufacture of parts of transformable furniture

To make a transforming bed with your own hands, you need to have the following tool at your disposal:

level, square;
jigsaw with wood saw;
screwdriver with attachments for screwing self-tapping screws and confirmations;
metal tape measure and pencil (thin marker);
electric drill with a set of drills;
perforator;
pliers, shoe knife, file.

The first thing you need to make a transformable bed with your own hands is a drawing. It is carried out according to the following principles.

The sketch shows the general appearance of the furniture and specifies the overall dimensions. In this case, the type of transformation must be thought out.
Using the sketch, a detailed general drawing is created.
Drawings of each part are made and all dimensions are indicated (in millimeters). It is taken into account that the thickness of the chipboard used is 16 mm (boards with a thickness of 18 mm and 10 mm are also produced).
When calculating the dimensions of parts at the joining points, you should take into account the thickness of the PVC tape for gluing the edges (sometimes 0.5 and 2.0 mm).
The drawing of each part indicates the sides whose edges are to be covered with PVC tape.
Parts with a width of less than 50 mm should not be included in the design: such a part cannot be technologically manufactured using a chipboard cutting machine.

Important: when using chipboard with a directional pattern on the front side, you should take into account the orientation of the parts and indicate it on the drawing.

If you cannot complete the drawings on your own, you can use ready-made ones (from the Internet or specialized literature).

Malyutka mechanism

The Malyutka mechanism is simple and easy to operate and has one swing speed, which can be set without remote control. In order to start the mechanism you need to rock the crib slightly. It also stops manually. Suitable for most cribs that have a pendulum mechanism.

Installation is easy and does not require any special skills. A magnet is fixed on the moving part, and a drive unit is installed on the stationary part of the crib. The device operates from the network.

Assembling a transformable bed

To make a stock you need to do the following:

Important: the bed (the movable part of the bed) should be designed as light as possible: the use of unnecessary parts should be avoided.

One of the main conditions for choosing a place where a transformable folding bed will be installed is the strength of the wall. If this is a transformable double bed, the wall next to it should be made of monolithic concrete or folded into two bricks. Otherwise, it will not withstand the load transmitted by the moving part of the transformer. As a last resort, the problem can be solved by installing spacers to secure the structure to the floor slab. After making sure that the appropriate place for installing the furniture has been chosen, we do the following.

As a result, we get a practical transformable bed (photos of some options are presented above).

For your attention - a do-it-yourself transformable children's bed (video demonstrating the possibilities of transformation).

A crib with a transformation mode will captivate parents with its stylish design, versatility and practicality. A properly designed cradle will provide a feeling of safety and comfort, improving the quality of sleep of a newborn baby.

Materials for work

The best material for making a crib for a newborn is wood . This natural resource is environmentally friendly, safe, does not cause allergies and is pleasant to the touch. Beech is recognized as the best wood for children's furniture : it is very durable and aesthetically pleasing. Oak, birch, ash and alder are also good options . Pine wood is quite soft and may not withstand the active pressure of children. So, you will need the following consumables :

Round transformable bed for newborns - advantages and features

A multi-component round transformable bed will be an excellent addition to the classic and modern interior of a children's room. Babies spend most of their time in the cradle, so the furniture must be spacious and safe for children aged 0 to 3 years.

A crib with a transformation mode is a combination of several items that are actively used when caring for a baby. The design can be converted into a playpen, a sofa, a changing table and even a full-fledged sleeping place for children aged 3 to 6 years.

Advantages and features of a round crib:

Compactness. The design consists of many components that take the place of a regular cradle. Elite furniture models have drawers for storing children's clothes and toys.
Ease of transformation. Parents can independently assemble and transform the cradle into a full-fledged bed, playpen or convenient changing table.
Great review. Parents can watch their child from any corner of the room.
Elegant and original design. The crib will fit perfectly into the design of the nursery.
Safety. Designers of children's furniture try to smooth out sharp corners that can harm a child who begins to crawl or roll over. The frame is made from natural materials that are safe for the baby’s health.

The service life of a baby crib is on average 10 years. Worn structural elements can be replaced, thereby updating or modifying the furniture. Many models are equipped with canopies, rocking mechanisms and wheels for moving the crib.

In the interior, a children's round bed will attract attention, so you should carefully study its configuration. The transformation happens in a matter of minutes. You can adjust the height of the base of the bed, transforming the crib into a full-fledged playpen or changing table. Some models expand in diameter and are divided into two chairs.

A transformer is more expensive than a regular bed for a newborn. The price depends on the configuration and number of functions. If you add up the cost of purchasing the structural elements of such furniture separately, purchasing a crib with a transformation mode will be a profitable investment.

Well-known manufacturer of swinging devices - Bayu-Bai

Sleep is very important for a small child. Its quality depends on how comfortable the conditions are. The Bayu-Bai device is designed to automatically rock the crib smoothly, so the mother gets the opportunity to rest.

The device is easy to operate. Almost all models have several swing modes and many other useful features. It is controlled remotely and operates silently; these are some of the most important advantages of the device.

There are many other advantages that will help you make the right choice.

Many models are equipped with similar functions and have this characteristic.

The device fits almost all cribs with a longitudinal, transverse or universal pendulum. The safety of the device has been confirmed by research.

Numerous reviews indicate the reliability and usefulness of the product. There is no need to get up in the middle of the night to rock your baby. During daytime sleep, mom has a lot of time to do housework, cook food, or just relax.

“My friends gave Bayu-Bai a miracle device, and that same evening my husband installed it on the crib. The first thing I noticed was that the mechanism does not make noise. My daughter loves to wake up early in the morning when she is so sleepy. She started whimpering and moving. I pressed a button on the remote control and the crib began to rock, the baby immediately fell asleep, and I didn’t even have to get up. Now my daughter is two years old, but I still use the device.”

Equipment - what elements does the round transformable bed consist of?

To choose a suitable bed, along with the design of structural elements, you should take into account the parameters of materials for manufacturing and decorative components. We must not forget about the child’s preferences, especially if the furniture is designed for long-term use.

A crib must first of all be safe, so it includes structural elements that must meet the individual needs of the child. The width between the rods must be taken into account, which should not exceed 6 cm.

Types of bed frame:

Solid arcs connected by a single semicircle.
Quarter circles fastened together.

The first option is stronger and more reliable. This design is easy to assemble and transform. The frame is strengthened using a connecting strip (tsar), which is located in the lower part of the semi-cylinders. The child can frolic, move and even jump inside; the frame can easily withstand such loads.

Additional structural elements:

Wheels with locks allow you to move the crib.
The pendulum mechanism is designed to rock a child.
The box under the crib is used as a place to store baby things.
Covers on the sides made of silicone, plastic or natural fabric will protect the child from injury.
The bottom height adjustment system is designed to change the position of the bed base.
A removable partition will allow you to place the crib next to your parents' sleeping area.

A high-quality round bed for newborns has a durable and stable design, in which each part performs a specific function. Additionally, a multi-stage base height adjustment system, wheels and an extension are installed to transform the cradle into a full-fledged oval crib.

Equipment options:

3 in 1 consists of a cradle, changing table and playpen. Transformable by moving the base of the bed along the fixed side walls. Suitable for children up to 1 year.
5 in 1 transforms into an oval bed. The structure can be turned into a comfortable sofa by removing one of the side walls. The furniture is suitable for a child aged 23 years.
6 in 1 turns into a changing table, sofa, play area and large bed for a preschool child. This furniture can be converted into a table with two chairs.
8 in 1 has a built-in pendulum system for rocking children to sleep.

Standard crib sizes are about 90 cm in diameter for a round cradle and 125x75 cm for an oval bed. Some models suggest the possibility of expanding the sleeping area up to 160x90 cm. The height of the sides is adjusted by parents.

Materials for the manufacture of children's furniture must be natural and environmentally friendly. Manufacturers use solid birch or beech of the highest grade. Additionally, the frame is covered with hypoallergenic paints and varnishes and reinforced with metal fasteners.

Completion of the installation process

Assembling the headboard of a children's bed. To do this, place all the planks on glue and immediately finish assembling the back completely. Using a clamp, compress the resulting structure, not forgetting to check the correctness of the right angle.

assemble the side walls of the bed in the same way. All internal corners of the assembled bed must be processed using a cutter (rounded);
In order to assemble the side and end walls of the bed into a single whole, use self-tapping screws designed for woodworking. Their length is usually from 80 to 100 mm;
The bottom of the crib must be covered with a sheet of plywood and secured with small nails.

Once the assembly is complete, the most enjoyable moment comes regarding the finishing. You will be covering our crib with varnish. For children's furniture, it is better to choose a more harmless option. For an aesthetic appearance, 3 layers are required. After each application, wait until completely dry before sanding. The crib is now ready for use. Sweet dreams and good health to your baby!

What transformation options does a round crib have?

A round bed has no corners that could cause injury. The child here feels protected, as if in the mother’s womb. Manufacturers include instructions with the bed, allowing parents to independently choose the optimal furniture conversion mode.

Popular options for transforming a 6-in-1 bed:

A round-shaped cradle for a newborn with a lowering base for a sleeping place. By moving the bottom to the upper position, you can get a full-fledged changing table. This bed option is designed for children aged 0 to 6 months. The size of the sleeping place is from 70 to 100 cm in diameter. A canopy can be installed above the cradle.
Spacious oval children's bed for babies up to 3 years old. Due to additional parts, the sleeping area can be expanded up to 120 cm in length. The width depends on the diameter of the cradle, that is, it ranges from 70 to 90 cm. The height of the berth is adjustable, and the guards can be removed if necessary.
A spacious playpen can be obtained by moving the base of the berth to the lower position. The crib becomes a safe play space.
The children's sofa, which the structure turns into after dismantling one of the side rails, will allow the child to rest during the day. The width of the seat depends on the size of the bed (120-160 cm). For additional comfort, it is recommended to lean several pillows against the backrest.
Two armchairs and a table are formed by detaching the central crossbar and the side parts. Each chair is 70-90 cm wide and 35-45 cm deep and can support a weight of up to 90 kg.
An oval bed for children from 3 to 9 years old can be obtained by expanding the central crossbar. The width of the bed remains the same, and the length can reach 140-165 cm.

The base is surrounded by bumpers on all sides, which protect the child from falling out of the bed. During installation and unfolding, you may need a small set of tools to tighten and remove bolts.

What kind of mattresses come with round transformable cribs?

Three mattresses can be supplied with the bed, which can be equipped with a cradle, a standard and a large oval transformable bed. For children, mattresses filled with coconut coir and latex foam are suitable. They perfectly support the baby's body. It is better to buy covers that are removable, since the baby often gets the sleeping area dirty. When purchasing bedding, you should give preference to natural fabrics. The best solution would be to purchase a cotton cover, but you can use high-quality wool as a replacement.

The mattress is not only environmentally friendly, but also has amazing orthopedic properties. The base with ventilation holes ensures optimal air circulation in the sleeping area. When using the bed as a table, playpen or chairs, the mattress is removed.

What additional features are equipped with round models of transformable children's beds?

Additionally, the oval bed for newborns is equipped with decorative elements, including soft sides and pillows. In advanced furniture models, a canopy and a motion sickness system are additionally installed. A canopy over the bed helps protect the baby from drafts, sunlight and dust. Complete with children's furniture, a canopy in the form of a “crown” design is used, covering the cradle with a translucent canvas or partially covering the sleeping area of a regular bed.

The pendulum mechanism is adapted for comfortable rocking of the child. The transverse pendulum swings the crib from side to side, while the longitudinal mechanism moves the berth from the head to the foot. The second option is preferable. The cradle, due to its round shape, supports both mechanisms.

website PS We do not sell furniture, we only help you get acquainted with what is available and navigate your choice.

Every parent tries to equip the children's room with everything necessary. Square meters do not always allow you to accommodate a work area, a sleeping area and leave space for games. The solution for small spaces is transformable furniture. Folding sofas and armchairs are traditionally used for these purposes. But the recently introduced beds that transform into wardrobes have already gained popularity due to their functionality and compactness.

Children's folding transforming bed

It can be either single or double. Transformable children's beds for two are especially relevant in one-room apartments.

A children's transforming bed is most often made of laminated chipboard or natural wood. In the second case, the price will be significantly higher. As for chipboard, it is resistant to mechanical damage, easy to clean and has a wide range of colors. The folded front of a bed for an adult child can be decorated with a mirror, which will visually increase the space of the room.

Advantages of convertible folding beds

If, for some reason, you doubt the choice of a transforming bed for your child, then it should be noted that the sleeping place itself is no different from a stationary bed. The main thing is that it has an orthopedic base and a good mattress. It is comfortable to sleep on it at night, and in the morning, folding it up frees up a lot of free space for games or receiving guests.

In addition, the room will always look neat due to the absence of an unmade bed. The mechanism is designed in such a way that even a small child can fold and unfold it with a slight movement of the hand. The special belts with which the bed is equipped perfectly hold not only the mattress itself, but also the sheet and blanket.

DIY transformable children's bed

Making a transformable folding bed with your own hands is not at all difficult. It includes three main elements: a stock, a lifting mechanism and a box. The box can be an independent structural element or also serve as a cabinet. But in any case, the thickness of its walls is at least 25 mm. The dimensions of a children's transforming bed are selected individually, but it is better to make it with a large margin for growth.

The box consists of a plinth, a supporting shelf and a back wall, which is not necessary, but its presence will add rigidity to the entire structure. Chipboard is used to make the bed, which will not only reduce the cost of the structure, but also make it lighter compared to wood. Let's look at how to assemble a transforming children's bed with your own hands.

First, the parts for the box are cut out. When calculating its size, it is necessary to take into account the thickness of the mattress itself and the height of the headboards. Finished parts are assembled on the floor using self-tapping screws.

The box is installed on the base or directly on the floor and screwed to the wall using metal corners.

Now it’s time to attach the lifting mechanism. Its choice depends on the type of reclining bed and the load that will be placed on it. So, for a single bed and a double bed, the use of the same mechanism is unacceptable.

When the entire structure is assembled, an orthopedic base is installed on it. To secure the mattress, and subsequently bed linen, special belts are attached to the frame.

The facade can be decorated as a cabinet, simulating doors with handles, or a monolithic mirror surface can be made.

Transformable children's bed video

If you can’t do it yourself, then when choosing it in a store you should take into account a number of nuances on which the price depends:

the quality of the lifting mechanism, which must correspond to the load placed on it;
availability of a mattress and its characteristics;
material from which the bed is made: solid wood, rattan, decorative glass or mirrors with photo printing;
quality and quantity of fittings;
the presence of additional shelves and drawers for storage;
When ordering a non-standard size, the price of a children's transforming bed will be higher.

Thanks to the instructions for assembling a children's transforming bed, you can save money and assemble it yourself.

Types of transformable children's beds

The most popular way to save living space in a children's room where 2 or more children live is to install bunk beds. But besides them, there is also a wide variety of designs that allow rational use of the room area. In addition to the fact that they differ in the number of sleeping places, the folding mechanisms also differ, which can be horizontal or vertical.

Vertical.

These are wardrobe beds that fold out along their entire length. Thus, a folded bed takes up space slightly wider than the mattress. In addition to the cavity for the mattress, it is equipped with additional shelves and drawers where bed linen, clothes or toys are folded.

Horizontal.

This refers to folding sofas. As well as dresser beds that fold horizontally. As the name implies, when folded they are a chest of drawers, each of the drawers of which, when unfolded, is a separate sleeping place. Such beds are especially convenient for preschool children. Very often they equip kindergartens.

Bed with drawers

They are beds where the sleeping place is stationary, but the structure itself is equipped with a large number of drawers. They are located not only below, but also on the sides. Often the bed has high sides that will protect the child from falling while sleeping.

Transformable children's bed

This is a multifunctional bed that can be used from birth. When the child is still very small, it has a high lattice and a cozy small sleeping place. But as it gets older, it turns into a full-fledged bed with low sides. In addition, they may have additional drawers or entire cabinets.

Pull out bed

Like the previous model, it has two positions. At first it is a compact bed with safe sides. In the future, it can be increased to the desired length, which will allow it to be used for many years.

It consists of two parts. The lower part can be equipped with wheeled legs, thanks to which it can easily slide under the upper part, which is larger in size. To make the bed easily adjustable, the legs of the smaller part are located on the inside of the side bars, and the larger part is located on the outside.

Sofa bed

They are no less popular than bunk beds when it comes to saving space. Modern sofa beds for children are available in various shapes and colors. In addition, they differ in the way they are folded: to the side or forward. They are often equipped with additional space for bedding. When choosing a sofa for your child, first of all you need to pay attention to its folding mechanism, because not every child can handle it on his own. The most optimal ones are: roll-out, eurobook and sedoflex.

Eurobook

Simple and reliable mechanism. The seat moves forward and the back rests in its place. The result is a wide and comfortable sleeping area.

Roll-out

The folding mechanism is reminiscent of a Eurobook, with the only difference being that the back of the sofa does not fold automatically. Transforming such a sofa, although it will take more time, is also not difficult.

Sedoflex

The folding principle resembles a folding bed. Its back and armrests are motionless, only the seat folds out.

There are a large number of options for transformable children's beds. Most of them can be done independently, and significantly save the family budget. The main thing is not to forget to ask about the child’s wishes and find out his opinion about this or that design.

Children's transforming bed photo

In the world of modern technology, when you want to fit everything you have purchased into a small area of your apartment, transformable beds are beginning to become popular. Let's look at how to make a transforming bed in a step-by-step DIY tutorial.

We make an unusual transforming bed with our own hands: types of beds

A transformable bed is an excellent solution when you need to combine several interior items into one design. This model is especially popular in small apartments. There are several main options for transforming a bed: wardrobe, desk, chest of drawers, sofa.

Everyone chooses the model that fully satisfies his requirements.
The principle of operation of the bed is based on the similarity of the sofa mechanism: with the help of special fasteners it is possible to fix it in a certain position. Wardrobe bed.
The most common model is the bed-wardrobe. Depending on the position of the bed when folded, two types of this furniture can be distinguished: horizontal and vertical.

The cabinet of this design can be real or imitation. The main components of this type of bed: a box, a sleeping place, which can be single or double, and a lifting mechanism.

You can make a bed-wardrobe with your own hands if you have the necessary materials and tools.

Before starting work, you should make sure that you have a complete list of necessary tools, of which there will be a sufficient number: a level, a square, a jigsaw (preferably electric) with a wood saw, a screwdriver, a tape measure and a pencil, an electric drill with drills, a hammer drill and pliers.

The first thing that will be needed at the beginning of work is drawings. They are performed independently, adhering to certain principles:

The type of transformation has been carefully thought out. The sketch shows the furniture in general form and sets the overall dimensions
Based on the created sketch, a general drawing is made in which all the details are displayed
Each part is considered and drawn separately, indicating all dimensions. When performing this point, you should also take into account the width of the material used.
The joints of the parts are carefully calculated, and the thickness of the PVC tape for gluing the edges must be taken into account.
All design details must be more than 5cm

Assembling the bed.
The very first step in making a transformer will be purchasing or making your own base. Before you start doing the work, you need to buy a mattress that will determine the size of the bed. To make a base with your own hands, you will need a laminated chipboard. The required parts are cut out of it. In a vertical bed, the base is also the front of the cabinet, so it can be made from fragments that differ in texture and color.

It is not recommended to cut chipboard at home, so it is better to contact specialized enterprises. If you still have to trim some parts, then in order to avoid chipping, you need to use a jigsaw at maximum speed.

You should buy shock-absorbing bent special plates, which are called “lamellas”; a frame of the appropriate size is also purchased with them. All this is put together and installed on the bars.

Then the bed is assembled using a screwdriver and a confirmat, which is hidden under a plastic plug. Iron corners should be used, which guarantee durability and strength. A 4cm x 4cm beam is attached to the side walls of the berth, which serves as a support for the structure made of lamellas.

The next step is to secure the mattresses and fasteners that will prevent the bed from opening spontaneously.
Wall mounting.
The wall to which the structure will be attached must be durable. After this, you can assemble the box, which can be equipped with additional shelves if desired. Then we give preference to one of the types of lifting mechanism: purchased, from garage curtains or with an electric drive. The hinge is attached to the berth and the box, after which the lifting mechanism is checked, the function of which is to easily lift the bed and fix it in one position.

You will also need shock absorbers and a counterweight system, which should be carefully selected. The base of the cabinet is attached to the wall, the bed is raised, and at this time the facade is decorated with various fittings and elements. You can safely use a homemade interior element. The photo clearly demonstrates one of the decor options for the wardrobe-bed:

LiveInternetLiveInternet

The idea of creating a rocking bed for a doll from a box from under that same doll came to me immediately after the purchase. How can you throw away such a beautiful box, especially since it fits perfectly! If you suddenly don’t have a box for a doll, any other one will do, as long as it has a lid. So, dear mothers and grandmothers, take note!

To implement our idea you will need:

First, cut the lid in half.

Place one half tightly against the end of the box, as shown in the photo. This will be one of the legs of the crib.