DIY box: master classes and creative ideas

Creative box

You will need: cardboard, scissors, a utility knife, pine cones, bamboo sticks, glue, acrylic craft varnish, ruler, pencil.

Master Class

1. Cut out a square of cardboard measuring 5.5 x 5.5 cm - this will be the bottom of the hut.

2. Cut out 4 trapezoids measuring 5.5x7.5cm and 5.5cm high - these will be the walls of the hut.
3. Cut the ceiling out of cardboard measuring 7.5 x 7.5 cm.
4. Cut 4 strips measuring 6.5x1cm.
   Read also:  DIY garden furniture: how to make, features
5. Cut out 2 equilateral triangles with sides measuring 6cm and 2 rectangles measuring 7x6cm - this will be the roof of the hut.
6. Glue the parts of the house together.
7. Glue the roof parts together.
8. Draw windows and doors with a simple pencil.
9. Cut off the scales from the cones and glue them to the roof as shingles.
10. Cover the hut with bamboo sticks.
11. Select windows, doors and chimney as in the photo.
12. Glue 2 cones to the bottom of the hut as chicken legs. Glue additional scales as fingers.
13. Glue bamboo sticks together to form a ladder.
14. Cover the hut box with acrylic varnish and leave to dry.

The hut box on chicken legs is ready!

Wooden bracelet box

You will need: a wooden bracelet, polymer clay and tools for working with it, round molds, paints, brushes, a glue gun, a white marker.

Master Class

1. Roll out a layer of polymer clay.

2. Press out a circle with a wooden bracelet - this will be the bottom of the box, then bake according to the instructions.
3. Paint the bracelet yellow and leave to dry.
4. Draw a pattern on the bracelet with a marker.
5. Glue the bottom of the box to the bracelet using a glue gun.
6. Prepare two round molds, one of them should be the size of the diameter of the bracelet, and the second mold should be slightly smaller.
7. Roll out a layer of polymer clay and squeeze out circles using two molds. Bake the clay according to the instructions and glue the circles together. This will be the lid of the box.
8. Cut out a “crown” from a layer of polymer clay, bake it and glue it in the center of the lid.

The “Pineapple” box is ready!

Ideas for decorating boxes

The decor of the box is limitless for your imagination. All this beauty can be made with your own hands. Not all boxes have an elegant design and are suitable for interior decoration. But if desired, this can be easily fixed. Anyone who has a little free time, patience and inspiration can make something exclusive.

You can decorate with anything: buttons, paper flowers, lace, polymer clay, beads, glass, coins, shells, and so on. Perhaps you have jewelry lying around that you don’t wear, but you don’t dare throw it away: it’s also useful for decoration. The photo shows a variety of decor for storage items. We hope that these ideas and master classes will be useful to you in your creativity.

(1 votes. 5.00 out of 5)

Doll box

You will need: 1.5 liter plastic bottle, Barbie doll, scissors, stationery knife, glue gun, crepe satin fabric, satin ribbons, lace, thread and needle, thin foam, metal jar lid.

Master Class

1. Cut the top and bottom of the bottle as shown in the image.
2. Cut off the neck of the bottle.
3. Cover the bottom of the bottle with crepe satin or other fabric.

4. Cover the metal lid with fabric and glue it to the bottom of the bottle so that the box is stable.
5. Glue the top half of a Barbie doll into the top of the bottle.
6. Cut a circle out of thin foam and glue it to the bottom of the plastic with the doll.
7. Place the doll on the fabric and make a skirt by gathering the fabric at the waist, tying it with thread and securing it with glue.

8. Cut 2 strips of fabric and glue them, connecting the top and bottom of the box.

9. Tie a satin ribbon with a thread and glue it to the bottom of the box. In this way, make the entire skirt, alternating satin ribbons and lace.
10. Make the top of the dress from satin ribbon and the gloves from lace.
11. Pull the satin ribbon well and glue it inside the bottom of the box.
    Read also:  Variety of handles for kitchen furniture, the best manufacturers
12. Make a cape and hat for the doll to suit your taste.

The doll-box is ready! I recommend watching the video master class!

The doll is a box. Doll - DIY box. LOL doll. Doll box

Variety of crafts

Boxes are a wonderful gift for birthdays, New Years, March 8th. Crafts come in a wide variety of shapes and materials. The girl will be pleased to receive a souvenir in the form of a doll box, made with her own hands.

A homemade wooden box made from leftover plywood and chipboard is suitable for storing cutlery. It is particularly strong and durable.

Note!

• 
  DIY satin ribbon bows - step-by-step instructions for creating unusual bows + detailed diagrams with photos

• Do-it-yourself furniture restoration: step-by-step master classes on restoration at home (120 photo ideas)

• Do-it-yourself rack: step-by-step instructions with photos and descriptions on how to make an unusual rack

A variety of decorative elements allow you to create a casket in any style. Foam moldings on a frame, painted “bronze” or “mahogany” will create the illusion of handicraft by wood craftsmen. From a distance you can't tell it from the original.

Exquisite box

You will need: a round Raffaello candy box, checkered cotton fabric, foam rubber, scissors, compasses, cardboard, a sheet of paper with a pattern, glue, thread and needle, decorative elements - artificial flowers, lace ribbon, pearl beads, twine.

Master Class

1. Cut a strip of patterned paper and glue it around the circumference of the box.
2. Cut a circle out of cardboard the size of the bottom of the box.
3. Prepare a volumetric circle of foam rubber the size of the bottom of the box.
4. Prepare a large circle of fabric.
5. Place foam rubber in the center of the fabric circle, and a cardboard circle on top, then cover it with fabric, as shown in the image. This will be the lid of the box.

6. Glue the box lid onto the top of the box.
7. Glue lace ribbon, beads and twine around the circumference of the box.
8. Glue flowers and decorate the box to your taste.

An exquisite box from a box of Raffaello chocolates is ready!

How to decorate with carvings

Carved boxes look much more original and interesting, but such work requires certain skills and knowledge. For beginners who decide to try their hand at wood carving, experienced craftsmen recommend starting with simple geometric shapes and large patterns. With a certain amount of patience, even a novice master will be able to cope with such a task.

The drawing is applied to the surface with a pencil, each line is well drawn. After this, the pattern is carefully cut out with an oblique knife or chisel in strict accordance with the applied markings. Small flaws and irregularities can be corrected with a file or fine sandpaper.

Mirror box

You will need: acrylic plastic with a mirror coating, a ruler, felt, masking tape, good glue, a cotton swab, a construction knife.

Master Class

1. Consider the size of the box. In our master class, the box consists of 4 panels measuring 12x6cm (rectangles), and 2 side panels measuring 6x6cm (squares).

2. Mark the size of the panels on the acrylic plastic and, using a ruler, draw the construction knife well several times.
3. Place the plastic on the edge of the table and make an even breakdown of each part of the box.
4. Prepare one rectangular and two square blanks.
5. Glue them together as shown in the image.
6. Glue another rectangle to the structure.
7. Apply glue to the top edges and carefully glue the rectangular panel.
8. Leave the box blank to dry for 12 hours.

9. Cut a strip of felt and glue it to the long side of the loose rectangular panel, then glue the structure as the lid of the box.
10. Cover the inside of the box with felt.
11. Leave the box to dry for several hours.

12. Remove the protective film from the acrylic plastic and admire the mirror shine.

The mirror box is ready! I recommend watching this video!

DIY MINI Dresser box!

Box in mosaic technique

To make such a box with your own hands you will need:

• polymer clay;
• liquid plastic (fimo-gel);
• knife and scissors;
• tape reels;
• cardboard;
• glue;
• satin ribbon;
• texture sheets for clay;
• talc;
• plastic varnish;
• brush;
• roller for rolling out plastic.

Cut out two circles from cardboard that will be the bottom of the base and the top of the lid.

Glue the parts together using glue.

Polymer clay of any color can be used as decoration. But white is considered mandatory, since it can be used to create different shades.

Roll out a thin layer of clay to decorate the inside of the box.

We cut the clay a little wider than the bobbin.

We cut it into several parts, making cuts.

We prepare the bobbin by lubricating the walls and bottom joints with a special gel.

Place the clay on the prepared area and press well. It is very important that no air remains, as bubbles may appear later.

Use a knife to cut off the top edge.

We cover the bobbin with clay, working out the joints well.

Cut a circle out of clay, slightly smaller than the inner diameter of the base.

Lubricate the bottom and attach the circle.

To hide the joints, we make flagella of a contrasting color and lay them out.

We give the vertical joints a similarity to a decorative seam.

We decorate the second part of the box in the same way, after which we bake them in the oven. The temperature and duration are indicated by the manufacturer on the packaging.

In the meantime, we are preparing the design for the outer walls. To prevent the plastic from getting stuck in the pattern on the texture sheet, we use talc.

Using a roller for rolling out plastic, we form a variety of designs.

We cut them into squares for ease of use.

After the base has cooled, lubricate it with gel and lay out the mosaic. We alternate colors and designs to make the box original.

Leave one strip free to make a fastening.

Glue the satin ribbon to the base, and then lubricate it with gel to cover it with squares.

Cover the bottom of the box with a layer of clay and bake it in the oven.

After the lower part has cooled, decorate the upper part. Lay out the bottom row in squares, lubricating the base with gel. We leave one row empty to connect the two parts of the box.

We decorate the lid with triangular-shaped pieces of clay.

Press them tightly to the base.

Glue the second part of the satin ribbon to the lid.

We make a small loop from the ribbon.

We lift the mosaic pieces and glue the tape. Bake the finished product. Then we cover the box with white acrylic paint.

We wash off the paint from the convex patterns with a damp cloth. Cover with matte plastic varnish.

This unusual box is ready for use.

Round box

You will need: intertwined cardboard, a spray gun (spray with water), a simple pencil, a ruler, a centimeter, whatman paper, burlap, twine, glue moment Crystal, glue pencil for fabric, padding polyester, cotton, compass, cutting mat, clamps, elastic band , oilcloth, scissors, stationery knife, thread and needle, leatherette pen or other decorative elements.

Master Class

1. Cut out a rectangle measuring 54x10cm from interwoven cardboard.

2. Moisten it with spray spray on both sides, twist the circle, secure with a clamp and leave to dry.
3. Glue the junction of the circle with a strip of thin paper.
4. Measure the inner diameter of the bottom, we got 16.7 cm.
5. Draw the bottom on the woven cardboard using a compass.
6. Cut out connecting strips from whatman paper using denticles with a total length of 54 cm and a width of 2 cm.
7. Glue the bottom to the main part using connecting teeth.
8. Prepare a rectangle of burlap measuring 56x15cm, then sew its edges.
9. Place the burlap blank over the main part of the box.
10. Glue the burlap along the edge of the bottom, then along the top edge of the main part of the box.
11. Cut out a rectangle of woven cardboard 57x3cm. Moisten and secure with a clamp - this will be the lid of the box. Set the piece aside to dry.
12. Measure the diameter of the bottom, ours is 16.5 cm. Using these dimensions, draw a circle on whatman paper with a compass, cut it out and glue it to the bottom of the box.

13. Measure the inner diameter of the box.
14. Prepare a rectangle with denticles from whatman paper measuring 53x9.5 cm.
15. Prepare a cotton rectangle measuring 53x11cm and glue it onto the rectangle of whatman paper with special glue for fabric, leaving the teeth free.

16. Prepare a rectangle of oilcloth measuring 57x6cm and sew lace trim along the edge.
17. Sew a transparent blank to the fabric with whatman paper and make 4 pockets.
18. Glue a blank with pockets around the circumference of the box inside.

19. Secure the edge using clamps.
20. Cut circles from whatman paper and padding polyester with a diameter of 16.3 cm, and from cotton with a diameter of 17.3 cm.
21. Glue a circle of padding paper and cotton together, then glue it to the bottom of the box.
22. Make the lid of the box in the same way as the base. We made the blank in step 11. The diameter of the lid is 17.7 cm.
23. Cover the lid with burlap and twine.

24. Attach a leatherette handle to the top of the lid or decorate the box to your taste.

The round box is ready! I recommend watching this video!

DIY jewelry box