The gas lift for the bed does not compress: what to do?

Bed repair from 1000 rubles!

The master will arrive within 1 hour or a convenient time!

Call a specialist now!

and get a 10% discount on subsequent work!

A bed is a piece of furniture that is installed in the bedroom and used daily. Due to regular use, structural elements of the bed may fail, and visible defects may appear on the surfaces. Repairing beds at home will restore the aesthetic appearance and necessary functionality of the product.

offers in-home bed repair services. Specialists will quickly and efficiently complete work of varying complexity within the agreed time frame, visiting the client’s address in Moscow.

Bed head repair

Our company’s specialists offer repair services for all types of bed headboards:

• reupholstering textiles and replacing the filling of the soft headboard;
• restoration of figured headboards upholstered in fabric;
• repair of hard massive headboards.

During the bed reconstruction process, employees perform the following work:

• dismantling the headboard;
• removal of upholstery material;
• complete replacement of the filler (for a soft headboard);
• stretching new upholstery;
• restoration of the coating (for hard headboards);
• product assembly.

The bed is broken: the bed creaks, the slats are broken, the lath holders need to be replaced, the mattress does not rise, the gas lifts and lifting mechanisms need to be replaced, the support legs have broken off from the bed base, the bed base has bent, the bed base needs to be replaced, and many other problems associated with the operation of the bed . A solution can always be found: buy a new bed or repair the one you have. You can always ask the price and decide for yourself what is more profitable for you. In most cases, Bed Repair in Moscow at Home will cost less than buying a new one. If the work is done efficiently, the repaired bed will serve you for many more years. And purchasing a new, but cheap bed is not always better than making repairs to strengthen the frame of the bed that you already have, since new beds have the same problems in their design as this one that you already have.

In beds with a lifting mechanism, breakage along the perimeter of the orthopedic frame and fracture of welded joints often occur. This happens because most manufacturers do not install supports in the form of legs, as well as additional supports along the bed frame for the entire perimeter of the orthopedic base. Thus, when there is a load on the base of the bed during sleep, the middle of the base, without support under it, simply bends. This can also lead to premature wear of the lifting mechanism and the gas supports themselves.

The lifting mechanism of beds is most often installed at the head of the bed, sometimes in some models manufacturers place them on the side. Lifting mechanisms are always installed in two pieces - on the left and right, respectively, or one at the head, the second at the foot. The reasons for the breakdown of such mechanisms are different, but the most common are the lack of additional supports, as well as deformation of the bed frame, and improper operation.

All lifting mechanisms in beds are equipped with Gas Lifts. They are selected according to the size of the bed lifting mechanism (these are the lengths when the mattress is lifted by the bed), as well as according to its load capacity, which is selected according to the weight of the mattress. If the Gas Lift stopped lifting the mattress, stopped holding the bed base or began to leak, then it is broken. Gas elevators cannot be repaired! This part is not subject to any repair - it only needs to be replaced with new ones, and only in a PAIR - left and right. The craftsmen of our company will carry out Bed Repairs at Home in a high-quality manner and on time. They will eliminate the problems of the mechanism or frame of the Bed, replace components: armor, batten holders, carry out carpentry work to strengthen the Bed frame, repair the legs. We repair and replace bed lifting mechanisms. We replace Gas Lifts. We repair Transformer Beds, in particular we replace gas lifts. Carpentry work includes Bed Frame Repair, Linen Drawer Repair, replacement of panels, bars, chipboard with plywood. Bed repairs in Moscow are carried out at the customer’s home. When visiting a client, our specialists have all the necessary tools.

Our specialists will arrive on site, diagnose and repair a sofa or bed. If there is a need to replace some parts or accessories, our specialists will help you purchase and deliver everything necessary for repairs. Consultations Free! We provide a guarantee for all repair work performed. The technician will arrive at a time convenient for the customer. We work seven days a week. The company has a discount system. You can send a photo of the breakdown to us by email:

8 (499) 403 32 35

Viber 89295110326 WhatsApp 89295110326

Working hours from 9:00 to 20:00 (7 days a week)

Our best masters

32

work for the last month

16 years

years of experience

Semenov Andrey Valentinovich

28

work for the last month

26 years

years of experience

Brezhnev Sergei Semenovich

36

work for the last month

27 years

years of experience

Ozerny Vladimir Viktorovich

All masters

Repair of lamellas and fastening of the drawer

Due to damage to the central beam, a chain reaction often occurs: the armor

, the furniture begins to creak.
When repairing lamellas, not only skill is required, but also accuracy of calculations. For example, the distance between the battens
should not exceed the width of a single plank.

Serious damage is caused by the destruction of the connection of the drawer - the longitudinal part of the frame - with the back of the furniture product. If you call a specialist in a timely manner, the situation is corrected by tightening the fastenings of the drawer and headboard

.

In advanced cases, the specialist chooses a different strategy. To secure the side part of the frame, not bolts and nuts are used, but steel angles.

Customer Reviews

Svetlana

5

I submitted a request for toilet repair and was pleasantly surprised by the quality of service and repairs. Anton is a true professional. Everything is fast and, most importantly, really inexpensive. 03/17/2020

Master: Bukreev Anton Anatolievich

Olga

5

The thread of the faucet was torn off, I thought it would flood the whole apartment, but the repairman arrived in just 25 minutes and changed everything very quickly, he had all the spare parts with him. 04.09.2020

Master: Mitinkov Denis Eduardovich

Igor

5

They called a technician to install the plasma. Everything was done professionally. The cable failed, the Internet was connected, the channels were set up, everything was great. I definitely recommend it. 11/13/2020

Master: Dudenko Maxim Anatolievich

All reviews

Troubleshooting spring mattress problems

The mattress is an essential part of the bed design that provides comfort. This item requires proper care. It is better to change it every 5 years, but if this is not possible, then it is recommended to correct the shortcomings that appear yourself. Standard beds use a spring mattress that deforms over time.

Options for large bed sizes, their main pros and cons

For repair work you will need the following materials and tools:

• nails with a hammer;
• slats;
• upholstery fabric;
• furniture stapler;
• foam;
• spare springs.

Repairing a spring mattress involves the following steps:

1. Preparation of the workplace. The product must be placed so that it can be approached from all sides. It is better to place it on stools placed in the corners. The base is freed from fasteners and paper clips.
2. Replacement of internal parts. The fabric that insulates the springs is cleaned of dust. The old element binding is removed.
3. Elimination of defects on the base of the mattress. The torn parts are sewn back into place.
4. Restoration of springs. Each element must stand strictly vertically and rise 10 cm above the frame level. To fasten the parts, slats and belts are used.
5. Strapping. This process requires a responsible approach. It is necessary to hammer nails along the edges of the frame. A thin rope is used to tie the top of the springs. First, the rows are processed across, and then along. Do not pull the string too tightly so that the springs maintain a vertical position and do not touch each other. Additionally, the strapping is done diagonally, after which the nails are bent.
6. Finishing. A lining is placed on the resulting mesh, which is fixed to the frame with slats.

Lastly, the mattress is covered with facing fabric. Immediately after the restoration work is completed, the furniture is ready for use. Repairing a bed with your own hands is a completely feasible task. You need to collect the necessary tools and materials, and also determine the cause of the breakdown. If you cannot restore the product, then it is better to purchase a new model.

Prepare the workplace, lay the mattress and free it from fasteners and staples

Remove the old binding of the elements and clean the dust from the fabric

Eliminate defects on the mattress base

Install new springs or restore old ones, make binding

Place the lining and secure it with slats on the frame

Place the restored mattress on the bed

Advantages and disadvantages

Advantages of a gas elevator:

• ease of operation;
• silent raising and lowering of the surface;
• when using liquid nitrogen in the shock absorber, the metal parts of the bed do not rust and the rubber gaskets do not deteriorate;
• convenience and ease of use (no effort required, as is the case with spring furniture);
• reliability (rare breakdowns of gas lifts);
• minimal risk of injury - moving parts are hidden under the casing;
• a wide range of.

The gas lift mechanism allows you to fold and unfold the bed about 20 thousand times, which is an approximate service life of several decades.

Flaws:

• unaesthetic appearance of the bed - gas lifts are partially visible;
• It is impossible to immediately determine the quality of the parts.

The conditional disadvantage of gas lift is the high price . However, it is compensated by a longer service life provided that it is installed correctly.

Get a double bed

A double bed is a necessary and desirable piece of furniture for every family. Its purchase is always associated with a long choice, as well as the expenditure of considerable funds. But you can make comfortable furniture for sleeping with your own hands, and you’ll still have money left over for a mattress and beautiful linen.

The bed that we will make is not just comfortable. It is beautiful, has a sleeping area of ​​1800x2000 cm, is equipped with a lifting mechanism and, accordingly, provides ample storage space.

Prepare everything you need

Materials and tools will be used in the work:

• sheets of sanded chipboard 16x1750x3500 mm for the frame;
• a sheet of 8 mm birch plywood FC 1525x1525 mm, from which we will cut lamellas;
• 2 sheets of fiberboard 2.5x1220x1440 mm will go to the bottom drawer;
• 18 m of 50x40 mm timber will strengthen the bed structure;
• sheets of foam rubber 30x1000x3000 mm for finishing the headboard, 10x1000x3000 mm for finishing the frame;
• non-woven fabric 1.6 m wide - 5 m;
• chenille 1.5 m wide - 5 m for front finishing;
• lifting mechanism equipped with gas shock absorbers;
• electric drill, drill bits;
• metal corners;
• sanding machine with attachments or sandpaper;
• glue;
• self-tapping screws;
• 8 mm bolts with washers, nuts, self-tapping screws;
• furniture stapler with paper clips.

Installation of the lifting mechanism

When planning to assemble the Suspa device, you should familiarize yourself with the basic recommendations of the manufacturer of this hardware. The gas lift installation process can be divided into several successive steps:

• First, the bed frame is assembled. When performing all operations, follow the manufacturer's instructions. Metal corners are used to connect the boards. This will strengthen the entire structure and make it more resistant to external influences.
• When the frame is assembled, they begin to attach the gas lift. The structure is fixed using special self-tapping screws, which are often included in the kit. Please note that some gas lifts are one-sided. Therefore, it is important not to confuse them.

In some cases, the side of the cylinder also plays an important role. This specification should be clarified with the manufacturer.

• At this stage, the folding frame is assembled. In some cases it is metallic and solid. If the structure is made of wood, then it is constructed in accordance with the manufacturer’s instructions.
• The procedure is completed by attaching the gas lift to the upper element. It is important to screw the mechanism only when the lid is open . This will eliminate the possibility of breakage due to incorrect calculation of the arm length. When the entire structure is assembled, you should run the system several times to check its functionality. If the system does not work properly, the mechanism should be reinstalled.

Installing gas lifts on a bed can differ in many nuances. If you are not sure that you can perform the operation efficiently, you should entrust it to an experienced specialist. The best option would be to make such furniture to order. This will allow you not only to select the size and style of the structure, but also to determine the optimal characteristics of the lifting mechanism.

If you still want to handle all the work yourself, consider important nuances. This way you can get better results. To learn how to install a gas lift, see the following video.

What is a gas lift?

Installing a gas lift on kitchen furniture ensures the correct and smooth functioning of any piece of furniture in the kitchen. What is gas lift? To fully understand this issue and learn how to properly install a gas lift, it is worth determining that a gas lift is a shock-absorbing mechanism that is intended for doors that open horizontally. In other words, this is a cantilever supporting part, a holder that fastens protruding horizontal parts on a vertical surface.

This is a sealed unit filled with nitrogen. When nitrogen gets inside the cylinder during use, it will be impossible to repair such a breakdown.

Source

Contacting Adele will give you comfort

Clients come to us from all districts of Moscow, and the reason for this is convenient terms of cooperation:

• We are ready to carry out reupholstery, upholstery and other repairs as soon as possible;

• a large selection of upholstery materials will give your bed a unique design;

• our prices are affordable;

• the professionalism of the staff will make you one of our regular customers;

• There is also the possibility of urgent repairs at home. The whole process will take place before your eyes, which will convince you of the speed of work and the experience of our craftsmen;

• you will not need to independently master the skills of working with wood, a jigsaw, a drill and other tools.

Still not getting enough sleep, tossing and turning on a creaky bed? It's time to put an end to these inconveniences! Our workshop will return complete relaxation to you and your loved ones.

Prices