DIY bottle holder for the kitchen

A bottle holder, or cargo, is a narrow drawer for quick access to liquid spices, oils, bottles and jars. Advantages of making it yourself: independent choice of design, no size restrictions - no need to adjust the base to standard 150 or 200 mm. And of course, it will cost less than factory analogues.

There is only one drawback - some models cannot be made at home. For example, you will have to buy a lattice nickel-plated metal cargo with all the fittings. In this article we will look at commonly used materials, types of fittings, and drawings. I’ll tell you how to make your own bottle holder for your kitchen.

You need to select accessories for a kitchen bottle holder individually

Cargo for the kitchen

One of the elements of the kitchen set is a regular bottle holder or cargo bottle. It is located in the kitchen unit, looks like an ordinary cabinet, and opens by pulling out the shelves. Bottles and cans are placed on it in a convenient position. With the help of special stops, they do not turn over and do not fall out of the shelf when it is opened.

Functionality

The bottle holder performs a specific function - it stores various bottles and jars. Basically, its place is near the stove. If the kitchen is spacious, then the kitchen unit can have two of them - on both sides of the stove. This is very convenient because, standing at the stove, you don’t need to go anywhere to add oil - everything is at hand.

The design of the bottle holder is very convenient. In addition to numerous jars and bottles, you can store baking sheets, towels, detergents or cereals in it. This shelf has many purposes.

If we consider baskets for storing homemade products, canned food and drinking water, then they should be retractable and located close to the worktops.

If the cargo is intended for detergents and cleaning products, then it must be installed next to the sink or washing machine. The depth and width of the niche are taken into account.

The bottle holder that stores sunflower oil, spices, and vinegar should be located closer to the stove where food is prepared.

The bottle maker, which fully lives up to its name and functions as a bar, is logical to place next to the dining area.

We are sure that you will be interested in information about making wooden utensils with your own hands.

Varieties

Finished products may vary:

by the number of levels;
according to the method of fastening;
by size.

As a rule, the bottle holder has two levels. They can accommodate bottles of different heights. There are also three-level products, but it is not possible to place a tall bottle in it. Because of this, there will be a whole row of spice jars and small bottles that have a non-vertical shape.

The cargo is secured inside the box using special guides. According to the method of fastening, a distinction is made between side and bottom. Side mounting is considered more convenient, since it will be easier to adjust the facade in the future. Guide rails are located to the left and right of the roll-out basket.

Bottom fastening is called a fastening in which the guides are fixed to the base of the box. It is used when there is not enough space in a narrow box for side fixation. In this case, adjusting the gaps is much more difficult. Sometimes cargo can be installed using bottom fixing directly to the floor. The main condition for such fastening is the presence of a perfectly flat and smooth floor.

When purchasing a retractable bottle holder, the kit includes an installation diagram and fasteners. If there are no elements, then self-tapping screws up to 10 mm long, which are intended for wood, will do.

Bottle holder for the kitchen: dimensions

Kitchen furniture manufacturers offer retractable bottle holders, the width of which can be from 100 mm to 450 mm, in increments of 50 mm. Modern kitchen furniture is incomplete without such a spacious basket. In cargo of non-standard sizes, you can store not only bottles and canned food, but also cauldrons, pots, pans and even some household appliances.

In the furniture set for a small kitchen, narrow systems with side fastening are installed. The most common size is considered to be 200 mm wide.

When planning a set of kitchen cabinets, allocate a narrow space for a bottle holder. Such a place will never be empty; you will notice its advantage the first time you prepare food.

Cargo installation

First, you need to measure the niche and buy a high-quality retractable model that fits the size. Let's take a closer look at the installation of a two-row model.

Measurements are made of the distance between the guides, using the holes for their fastening. The location is determined by eye, depending on the height and depth of the box. The height of the bottle, which will be on the top tier of the cargo, is taken into account.

In order for the cargo to function normally, you need to provide a gap between the back wall of the box and the fittings; the depth of the box is taken into account. The same needs to be done in front: it should be attached deep into the module, 10-15 mm.

Inside, on the side wall of the box, markings are made for the guides. Then the guides are removed from the fittings and attached to the side wall. The marking must be done accurately and carefully, taking into account the exact data of its width and length. When the guides are secured, the bottle holder itself is inserted into them.

Next you need to assemble the entire box.

And finally, the façade is installed. To do this you will need 4 screws: 2 for the top and 2 for the bottom. First you need to make markings. To do this, you can attach the facade to the fittings, or you can take measurements using a tape measure.

All that remains is to put a handle on the façade.

Do-it-yourself cargo for the kitchen

We are considering the manufacture of a free-standing, convenient module, which, if necessary, can be moved to any convenient place.

To work you need self-tapping screws, 1 cm plywood, 15x25 mm timber and acrylic paint in white, black and bronze. Take any paint that will best suit the design of your kitchen. The tools you need are a hacksaw, sandpaper, a drill and a drill bit.

Let's get started:

On the plywood we mark rectangles measuring 40x45 cm and cut them out.
According to the diagram, we make markings for the holes. We change the attachment on the drill and cut out several round holes.
Using sandpaper we process the edges of the resulting holes.
At the bottom of each workpiece we make legs by sawing out a semicircle.
Using a hacksaw, we cut the block into pieces 18 cm long. The ends are treated with coarse sandpaper. At a distance of 60 mm from the top and from the bottom, we make markings. We prepare holes for the screws, assemble them by screwing them to the previously cut bars.
We prime the surface and paint it in the color you like. You can use clear varnish instead of paint.

A handmade bottle holder will be a unique and convenient module in the interior.

Cargo design

As you understand, many useful devices can decorate the interior of the kitchen. These include the bottle holder. If it is intended exclusively for wine, then it should be located away from sources of heat and cold. Temperature changes may cause the product to deteriorate.

To make such a device at home, the following materials are used:

glass;
plastic;
tree;
metal.

The device can be made for one bottle or several. An exclusive bottle of rare wine that will be served to the table will look very beautiful.

The device can be purchased at any furniture store, or you can order it. This way the design will be the way you like it and will fit into the model strictly in size.

Cargo may not be built into the kitchen set. It can be placed on any shelf in the closet.

Useful tips

Cargo can be placed inside upper (wall) or lower cabinets. It depends on the customer’s preferences, his height, and the purpose of this box.

If the kitchen set will be made for a large kitchen area, then you can plan in advance for the installation of two bottle holders. They can be placed on both sides of the hob. This will allow you to keep many items within reach while cooking.

You can arrange one compartment at the top, in a wall cabinet, and the second at the bottom, near the stove. Such designs of additional sliding shelves are very convenient.

A multi-level bottle holder, the height of which can reach human height, will fit perfectly into a spacious room. It can accommodate a bar, a stand for baking sheets and trays, a shelf for cereals and cans, and much more.

If there are towels in the cargo, then it is worth installing a towel holder there.

If you don't want to hear glassware clinking when you slide out or turn the cargo, it's worth installing bottle dividers inside. They will prevent glass bottles from falling on a half-empty shelf.

To ensure complete comfort when using cargo, you need to choose models equipped with closers and devices for soft, silent closing.

When choosing cargo, pay attention to the quality of the shiny coating on the metal. The ideal option would be chrome plating, which is done by galvanic means. The resulting coating will last a long time; there will be no scratches, chips, abrasions or rust on the surface.

Location options

There are several ways to place bottle holders. As a rule, it depends on what exactly you plan to use it for.

There are two main types:

built-in;
autonomous.

The first model is suitable for installation in a kitchen cabinet. The stand-alone design is independent of your existing headset. Install it in any place. This is a completely independent element from the kitchen design. Bottle holders are also distinguished by the number of shelves:

two-level;
three-level.

In the first case, you can place tall bottles. Three-tier cargos are designed for a larger number of items, but they have height restrictions. When choosing one option or another, you need to focus on what exactly you plan to place. For small containers or dishes, a three-tier bottle holder is perfect. And for standard containers with vegetable oil, it is better to choose an option with fewer floors.

Bottom cabinet

This area is suitable for storing cargo for detergents, oils in tall and bulky containers, bottles of wine and other alcoholic beverages. It is convenient to store not only utensils, but also kitchen towels. It is advisable to place cargo near a sink or washing machine. Dishwashing detergents will always be at hand.

Upper cabinet

In this part of the kitchen furniture, bottle holders are often used for spices and seasonings. This keeps the herbs clean and tidy - no moisture or contaminants will get into them. It is convenient to place the cargo close to the hob.

Column cabinet

This installation option is an advantageous design solution for almost any kitchen. This arrangement is planned at the design stage of the headset. In order for everything to look harmonious, consider placing the bottle holder next to a single façade. Also, cargo in the form of a column cabinet is often located near the refrigerator.

Mounting options

Most models provide a method for installing cargo in a box. Its placement implies several possibilities:

frontal method (the structure is attached to the inside of the opening door);
bottom mounting method (attached to the bottom panels of closed compartments). It implies a movable or rigidly fixed structure;
to the inside of the compartment.

Cargo on roller support has gained great popularity.

DIY bottle holder for the kitchen

When making this accessory at home, you must first determine the purpose of use. Next, the dimensions and location are measured. It is necessary to plan what the number of levels will be. The cost of a homemade design will be an order of magnitude lower than when ordering it from a company.

After the measurements, a drawing is made and all the necessary materials and accessories are purchased.

Accessories for the bottle holder include:

closer;
railing handles;
guide system.

Common and proven companies of cargo components:

"Bloom";
"Vibo"
"Kessebohmer".

Blum, a company from Austria, has established itself as a reliable supplier of retractable systems and fittings. Manufactures structures 450-500 mm long with fastenings for spacer plugs and self-tapping screws. The price of bottle holder elements ranges from 6000-7000 rubles. The advantage of these systems is the smooth sliding of the drawer closing mechanism, which does not depend on the load weight. Wear-resistant rollers last for many years.

"Vibo" is an Italian manufacturer of premium fittings. This brand is focused on the most effective solutions in using kitchen space. Models of two or three levels are made with a width from 100 to 450 mm. Can be used for installation in both upper and lower cabinets.

Vibo fittings are made for use with or without a door closer. As for the cost, it varies between 5,000-10,000 rubles.

Kessebohmer is a German company specializing in the production of components. Their focus is functionality and creativity. Standard models of bottle holders include not only modules for main containers, but also space for baking trays and a towel holder. Options for the number of shelves – from one to three. The guides in this system have a diagonal arrangement, the parts are fastened with self-tapping screws. The cost of these kitchen elements is much higher - varies from 10,000 rubles.

When choosing a manufacturer, you should pay attention not only to the brand, but also to focus on the quality and material of manufacture. It is better to choose chrome-plated steel components. They are strong and durable.

After the necessary components have been purchased, you need to make an outer box. Suitable for this:

MDF;
solid natural wood;
Chipboard.

It is important to consider the dimensions of the internal structure, taking into account the fittings.

Tips for making

Below are recommendations for those who decide to make cargo with their own hands:

At the design stage, it is necessary to plan the load. The narrow version of the design can withstand much less weight than wider elements.
By purchasing special soft separators, you can minimize beating and ringing when bottles and dishes come into contact.
It is recommended to use door closers. They allow you to make the design silent.
It is better to trust the quality when choosing accessories. The more reliable the coating of the material, the less likely it is for chips, abrasions and rust to occur.

When making cargo with your own hands, you need to pay attention to accurate drawings at the design stage. If measurements are taken incorrectly, the design may not work correctly in the future. It is worth considering that the inside of the bottle holder is not only made of metal. It can also be made from wooden rods or even using the macrame weaving technique. When creating furniture with your own hands, the flight of imagination is endless.

Cargo as an item for arranging containers has been used in modern kitchens relatively recently. However, thanks to its high functionality and convenience, the bottle holder has become a popular piece of kitchen furniture in a short period of time. It allows you to use even the smallest space in the room rationally and conveniently. Any housewife will like this, because you can place everything you need at hand.

A functional kitchen is the dream of any housewife. Yes, whatever, and the owner too. It’s not enough to correctly plan the placement of cabinets and choose beautiful facades for them. The storage system is what is truly valuable in any headset. A bottle holder for the kitchen is one of the modern devices for arranging furniture. In it you can compactly place all kinds of saucepans, jars, bottles, so that they are always at hand. The editors of the online magazine Homius.ru have prepared material about such a kitchen “gadget” that will help you choose and assemble it yourself.

Bottle holders, no matter what anyone says, make the interior luxurious

Tips - how to avoid mistakes

A few tips to help you avoid making a number of common mistakes:

You should not skimp on closers - this element makes filling more convenient and reduces noise in the kitchen.
Special bottle holders will make the bottle holder even quieter. With them, glass containers will not ring upon contact.
During design, pay attention to load calculations. Narrow modules can support up to 20 kg.
Buy fittings from trusted manufacturers at certified outlets or well-known online stores, such as Leroy Merlin. It is better to buy a reliable mechanism without fine-tuning than a more functional one, but of dubious quality.

When making it yourself, it is important to take the dimensions correctly and not make mistakes later when marking. Before drilling or cutting anything, it is better to double check. If you have doubts about your own capabilities, it is better to entrust some of the work to a master. You can calculate the detailing, cut the blanks to size and glue the edges at most furniture assembly companies.

Do you need a bottle holder in the kitchen: pros and cons

A retractable bottle holder is an indispensable and desired attribute of a modern kitchen. Despite the fact that such specific pull-out cabinets have been in use for more than a couple of years, everyone “covets” them. Even owners of small kitchens and people with a minimum budget to purchase it. Is it so convenient and irreplaceable?

Pictured is a bottle holder for the kitchen

What is stored in the bottle: sunflower oil, vinegar, sauces. In wide models you can find anything you want - spices, cereals, dishes. Some even order two bottle holders so that they can store household chemicals in the second one.

Convenience:

all bottles in one place;
you can fit a bunch of little things;
completeness of the set, especially if the kitchen is of non-standard sizes: for example, there is a free space of about 20 cm - you can’t even put a drawer, and you won’t leave any free space.

Of the minuses:

if there are small children in the house, then such a box will be empty for the first three years, or even more. It’s so interesting to constantly pull out a small drawer. In this case, you can completely forget about storing vinegar in it;
when the bottle is less than half full, it falls when the box is opened, which is not very convenient;
with a small kitchen area, even 15 cm to a regular drawer will not be superfluous;
it is important to choose the right location, otherwise you can forget about the benefits of such a box;
considerable cost. Setting up a bottle holder is not a cheap pleasure. If the budget is limited, then saving on fittings, countertops or facades is not advisable just to build in such a drawer;
inconvenient to clean from dirt. The standard and simplest bottle holder is a regular lattice without a bottom. As the practice of most people shows, if there is sunflower oil in there, which is used constantly, dripping down to the bottom of the box along the metal grate is inevitable. Cleaning such a structure is extremely inconvenient.

Of course, everyone is guided by their own reasons when ordering and operating such a device, which can have all sorts of modifications. All that remains is to decide and choose the necessary type of filling for the mini-box for yourself.

Types of bottle holders for the kitchen

In fact, all bottle holders are very similar to each other. Unless, of course, you take into account the original works. Therefore, understanding them, as well as making a choice, is not difficult.

By installation method

According to the principle of the device:

built-in – we see these in every modern kitchen set. They are made in the form of regular grilles, or with other filling, for example, with cup holders for spoons or with a panel for lids;
autonomous. The name itself speaks for itself. Such designs are of a modular type that can be delivered to an existing set at any time, and can also “exist” without it independently in any corner of the kitchen. A striking example is modular kitchen systems from IKEA.

Both structures can be assembled and installed independently.

The design of the bottle holder was originally invented for storing wine. The first models were bulky and could take up the entire basement. Later, smaller versions migrated to walls, cabinets and kitchen islands. In Russia, bottle containers are most often used to store oils, sauces and spices. However, you can find anything you want in them.

They also order special fillings for spoons, ladle, small pots, lids, cereals, dry spices, canned foods, towels, baking sheets and other things necessary for every housewife. Some people even manage to store household chemicals in them. There are non-standard models that look like regular drawers - a great option for those who have a lot of different bottles. It all depends on the requirements and imagination of the customer.

"Number of floors"

A standard bottle holder, as many people imagine it, has two tiers. If desired, you can find three or four separate models with different heights. For “fans” of such cabinets, you can make entire columns more than a meter high.

Today, the entire Internet is excited by the interesting design of a retractable bottle holder made of wood, located in a narrow space behind the refrigerator. Saving useful space and using unclaimed space behind equipment. This option is suitable for kitchens of any size, and you can also make it yourself.

What about beauty?

Often standard narrow bottle holders are made of wood or based on materials imitating it. Glass, metal coatings, plastic panels and other materials are used for decorative cargo. Glass is painted using special technologies, metal parts are forged, plastic surfaces are painted, and given unusual shapes. Ornaments and designs are carved on wooden retractable surfaces.

Beautiful bottle holders for kitchen sets are made for one or more containers for wine.

They can serve as an impromptu bar in the kitchen or a storage basket.

Where are the bottle holders located?

Not only the ease of use of it, but also, in principle, the relevance of its use in the kitchen depends on where the bottle holder is located. Therefore, before purchasing, it is advisable to clearly determine where it will be located.

Upper and lower cabinets

Near the hob or sink in the lower drawers - these are the most common locations for bottle holders. Of course, this is also influenced by the nature of the filling.

Wine bottle holder

For those who do not want to bend over every time for frequently used utensils or products, place this design in the upper cabinets. The solution is non-standard and more suitable for tall owners.

Another location option is the middle zone between the upper and lower cabinets. Yes, in the middle of the set such a cabinet will look awkward, but near the refrigerator or pencil case it’s quite laconic. One of the disadvantages is that such a cabinet “eats” the work surface. But everything you need is always at hand.

Separate column cabinets for tall bottle holders for the kitchen

Columns, or sliding cabinets, are an independent storage system. They can be made as a single structure, or have several drawers.

You can order a similar cabinet as a built-in headset unit. It is also possible to purchase it separately and install it yourself. At the same time, the choice of facades for such ready-made cabinets is quite large.

Large bottle bottle next to the refrigerator

The most convenient placement of such a column cabinet is next to the refrigerator. Quite a convenient element of the headset. You can easily place all your jars, canned goods, alcohol in it, and you never know what else you can put in there. It all depends on the size. Typically, the height varies from 1200 to 1450 mm, while the width of the facade is 300 mm. The filling can be different - from three to six standard shelves for bottles, the presence of closers for smooth closing, additional storage elements for small items, regular shelves supplemented by drawers.

Bottlemaker Titan Arena

Purchasing such a full-size bottle holder is really expensive. For example, a bottle holder for the kitchen with a height of 1200 mm, a front width of 300 mm and four regular shelves of the Titan Arena brand will have a price of 30,000 rubles.

If desired, you can assemble a similar structure yourself from ordinary furniture material. All that remains is to find the appropriate content and carefully study the video master class presented below.

Features of bottle holders for the kitchen of different sizes

Another classification of cargo, and determining for many kitchen sets, is size. Let's look at the standard models of bottle holders, which are most often built into small but functional sets of Russian kitchens.

Bottle holders for the kitchen 200 mm with closer

Cargos with a base width of 200 mm or more are intended for large kitchens. The decent width of the shelves allows you to store in such a cabinet not only many bottles, but also various kitchen items and products.

Cargo drawing for a 200 mm façade

Compared to conventional cabinets, they save space, and at the same time, they are practically equal in capacity, especially if we consider cargo with three or more tiers.

Kitchen bottle holders for the kitchen 150 mm with closer

Medium-sized bottle holders have a base width from 150 mm to 200 mm. The most practical designs are those with a side mounting method or as free-standing headset elements. The presence of a closer ensures smooth closing of the drawer. It is also worth keeping in mind that the presence of such accessories increases the cost of cargo.

Regular bottle holders for the kitchen 100 mm with closer

100 mm is the optimal width of the bottle holder in a narrow or simply compact kitchen set. But even such a small area is enough to accommodate various bottles and small kitchen items, such as baking trays. Two-tier cargo of this width are the most popular, as they are the embodiment of low cost and functionality.

Narrow bottle holder

If, during operation, such a cabinet turns out to be “not enough”, due to the versatility of the design and fastening, you can order another one or buy a separate structure.

Concept of a bottle holder

Looking at different photos, there are no special questions about what the bottle holder is needed for. Its name explains everything.

In fact, this is a narrow roll-out design that can have 2-3 levels to accommodate different bottles and more.

This is an excellent solution for the kitchen, which allows you to intelligently use bottlenecks and unused space. For example, a bottle holder can act as a separator between a refrigerator and a gas or electric stove.

Bottle holders, also called cargo, will be appropriate in a spacious kitchen and in a small Khrushchev-era apartment. Most often, the structure is installed near the sink or on the side of the stove.

Which bottle holder is better to buy for the kitchen?

For a kitchen set, its functionality is first and foremost important, and only then – beauty and style. This also applies to the bottle holder. Its effective use directly depends on how correctly it is selected. Let's look at the basic principles that you should rely on when selecting bottle holder designs.

According to the size and number of bottle holder shelves in the kitchen set

There are basic parameters for selecting cargo for a headset that need to be thought through in advance.

Size. To store a bottle of oil and small spices, a 100 mm bottle holder is sufficient. If you plan to place detergents and cleaning supplies there, then it is better to opt for medium-width cargo - 150 mm.

Cabinets 200 mm wide can easily accommodate cereals and other products. In wider bottle holders you can store entire sets.

Number of shelves. Standard cargo has two shelves. The lower one is for tall bottles, the upper one is for small containers.

Three-tier designs are convenient for those who constantly keep many small containers with spices and sauces on hand. There are also single-tier bottle holders, where on the top of the basket there is space for towels and napkins, and in the bottom - for tall containers.

Note! If the fittings are of high quality, then the height of the existing shelves can be adjusted independently.

By mounting method

From the wide range of kitchen bottle holders, only two types of fastening can be distinguished:

lower. Relevant for wide baskets that can withstand heavy filling weight. Allows placement in any part of the kitchen unit.
lateral. This installation method is relevant for cargo with a width of no more than 2500 mm. It features more flexible adjustment of facades and reliable fixation of fittings.

As for the independent collection and installation of bottle holders, there are no obstacles, either for one or for the other type.

Bottle holder for the kitchen: how to choose sizes, materials and other elements?

Much depends on the size of the cabinet into which the module itself will be built. Usually modules with a width of 15, 20, 25 cm are selected. If they are narrower, then it is difficult to place a bottle of olive oil there.

If the module is intended for storing dishes in the kitchen, it is recommended to take it at least 400 mm wide.

As a rule, baskets with a small width have two shelves in their design.

Large containers are stored at the bottom, while low jars and boxes are located at the top.

Shelves with three tiers are convenient when a lot of low cans will be placed in the cargo.

This arrangement of shelves is suitable for storing a large number of spices.

The basket can be single-tiered, so it’s easy to put a baking sheet and other tall things in it.

A small shelf on top will serve as a convenient addition.

For maximum capacity, retractable bottle holders for the kitchen are equipped with a front part with an angle of 45 degrees.

They are hung on the left or right side.

There are rotating bottle holders.

The element moves towards you, and it is easy to get the desired item out of it.

The nuances of making a bottle holder for a kitchen set

Assembling a bottle holder with a side right mount has a simple and intuitive algorithm of actions.

Illustration	Description of action
	We unpack the cargo. In addition to the kitchen “device” itself, it comes with fasteners (euro screws) and guides, which may already be attached to the base.
	We set the base so that the guide is not extended, but is in the zero position. The top level of the basket should not protrude. A small recess into the cabinet is allowed, but not more than 2 mm. Using a ruler, measure the scattering from the edge of the cabinet to the first hole. You need to remove the guides to secure them to the cabinet. To do this, move the fixing pin down until it clicks and carefully remove the guides.
	We make markings based on measurements for fasteners. Please note that the base must be located at a height of at least 30 mm from the bottom of the cabinet. Using the markings, we drill holes for the Euroscrews.
	We fasten the base mounts.
	We extend the guides and “put” the mesh in place. We check how correctly and smoothly it extends. If everything is fine, screw the second side of the cabinet, put the cabinet in place and mount the facade.

Important! To level out the smooth running of the bottle holder, tighten the flag located on the back side of the structure. You can use a screwdriver for this. Leave the flag in a position in which the base will extend smoothly and without interference.

The video below will tell you how to assemble a side-mounted bottle holder and how to adjust it correctly.

If you need to remove the bottle holder in the kitchen set, then by performing this algorithm of actions in reverse order, you can easily complete your mission. But how much it is needed in the kitchen is up to each housewife to decide. Fashion is fashion, and everyone has their own criteria for comfort and convenience.

Mechanisms and types of cargo baskets for the kitchen

There are several types of kitchen cargo on the market for useful furniture novelties:

retractable - wire mesh or trays hidden behind regular doors, mounted on guides of various systems and retractable along them to the maximum distance allowed by the design. Such devices must be manually pulled out of the furniture niche to gain access to their contents;

Convenient pull-out grids for storing food

Storage systems with drawers are very practical

roll-out - interlocked with doors, which are their front panel and fit into the overall design of the furniture. Such models slide out when the cabinet is opened and provide immediate access to the entire contents of the shelf;

Roll-out drawers placed vertically to the full height of the kitchen provide maximum convenience when using them.

A roll-out shelf will help solve the problem of finding things

carousel - installed in corner sections of kitchen units with limited access. Rotating on an axis, such baskets allow you to get the necessary items from distant corners of the furniture;

A necessary element for a corner kitchen, allowing you to save space and quickly find the necessary things

“magic corner” system - the shelves rotate and slide out one after the other as the door opens. When closing they hide in the reverse order.

This system allows you to easily reach any item placed on its grids.

In addition to differences in mechanisms, storage equipment can be classified based on its specialization. Different types of baskets are used to place different items.

Bottles and tall narrow vessels are conveniently placed in bottle holders with containers of different heights.

Retractable bottle holder for the kitchen: functions and location features

What is a bottle holder for the kitchen, or as it is also called cargo? This is a drawer with a narrow shelf, equipped with special closers. This type of cabinet is very convenient and functional for storing various items in the kitchen: bottles, jars, cereals, kitchen utensils, towels, etc. And this opening and closing system allows you to protect items from tipping over, thereby ensuring their complete safety, and also relieves the housewife from annoying slamming sounds from cabinet doors.

Depending on what you plan to use the retractable bottle holder for the kitchen for, there are different options for its location:

if you use the bottle holder for its intended purpose, then the best place to place it will be the dining area;
if it is for storing food additives or storing frying pans and saucepans, then it would be correct to place it near the stove;
if for storing cleaning and detergents, bags and towels - near the sink or washing machine;
for storing seasonings and spices - in the lower or upper part of the kitchen unit. Storing spices in this way will allow you to keep them in a certain order and protect them from kitchen dirt;
You can use a place near the refrigerator to store various jars, bottles, cereals, and cereals.

Cargo shelves in the kitchen

Every housewife strives to conveniently organize free space. One of the most interesting and functional parts of the kitchen set is the bottle holder.

This retractable element has the second name “cargo”.

It is convenient to place bottles of different levels, jars and even pots in the kitchen, properly organizing free space.

It will prevent them from turning over and knocking over objects.

At the end, this part is protected by a facade, which can be made of plastic, wood, chipboard, MDF and other materials.

Inside the kitchen set it is held by telescopic guides along which it moves.

The kitchen cargo consists of 2 or 3 levels. Three-level designs do not allow tall objects to be placed in it.

Using this option is not very convenient, which is why such models for the kitchen have not gained much popularity.

As an option, cargo is supplemented with sections for installing baking sheets or rods for towels.

A bottle holder with a towel holder is very popular due to its practicality.

Dimensions of a bottle holder in a kitchen set - choose dimensions

On the supply market, there are a number of possible options for the location of bottle holders built into the kitchen unit (this is an excellent opportunity to use space that might not be used at all).

Its dimensions vary from 100 mm to 450 mm (width). They directly depend on which part of the furniture fittings the bottle holder will be built into, what will be stored in it and how much additional space your kitchen set has.

Note that if the size of your kitchen is small, then it would be preferable to use narrow systems with generally accepted standards of 100 mm, 150 mm and 200 mm with side fastening. If the dimensions of the kitchen allow you to fit a bottle holder of a more capacious design with dividers into the set, then it is better to give preference to wider options for its design (from 200 mm to 450 mm).

If you don’t particularly trust manufacturers of kitchen sets or are simply used to and like to do everything with your own hands, then why not make your own bottle holder for the kitchen. For this:

decide on the size of the structure and the location of its installation;
create a schematic drawing of a bottle holder with the indicated dimensions;
choose the material and fastening system that will suit your design. Let us note that in appearance you should not particularly distinguish the bottle holder from the kitchen set, but it is better to use the same material and color from which the entire kitchen is made. This will help you maintain its attractive and harmonious appearance;
cut cargo elements from blanks. You will need them to make trays and the body;
fasten the necessary structural parts together;
install the fastening system. Note that a system with closers is often chosen.

Your bottle holder for the kitchen is ready!

Bottle holder for the kitchen in 44 photos - simplifying and decorating everyday life updated: August 1, 2021 by: Evgenia Elkina

Bottle sizes

Cargo can come in a variety of sizes. The most common models have a width of 150, 200 and 250 mm. Optimal parameters are selected taking into account functionality and ease of use. The enlarged version includes fastenings for cutlery, bowls, and glasses. If you want, you can design a larger model - exceeding 250 mm in width. This furniture solution is perfect for storing utensils in the form of a frying pan, pot, or ladle. It is convenient to place a mixer or blender in the bottle for whipping cocktails. The average cargo dimensions range from 150 mm. They are designed to accommodate standard containers and bottles. Small dishes will also fit there.

The most common dimensions are about 100 mm. They allow you not to go beyond the boundaries of the kitchen unit when designing.

Cargo cabinet for the kitchen - advantages

What is cargo? To put it simply, a cargo closet is a metal basket made of small diameter rods coated with chrome or special paint. The basket moves, as a rule, on rails, so that you can almost completely remove it from the cabinet in which it is installed. The principle of operation is very similar to a drawer in a kitchen set, but they differ in that when taking out cargo, we take out all its contents at the same time, and not individual sections, as is the case with drawers. This basket is sometimes equipped with high walls; this design allows you to store quite tall objects in it.

Basket boxes also have other benefits. This is a very functional solution when it comes to organizing narrow spaces where the use of regular drawers is ineffective because the narrow space of the cabinet makes it much more difficult to access the products stored in it if you use the version with static shelves.

Cargo kitchen fittings must be of high quality, especially in large drawers, only then will the system be durable.

Examples of using cargo

Sometimes it turns out that when designing a kitchen set, there is little space left for a narrow drawer, which is very convenient to use for storing bottles. This solution has its own charm, but not everyone likes open shelves that collect dust. The cargo system will ideally cope with this task.

One option is to install such a system in close proximity to the stove or sink; now this narrow space can be conveniently used to place bottles of household chemicals.

When it is near the stove, we can put oil, sauce bottles, sugar packs, flour, or other products that we often use while cooking.

Tall cargo cabinet

It comes in handy if you need more space for food or need to maximize space in a small kitchen. The system allows you to conveniently and efficiently place a variety of cooking utensils, products and kitchen utensils. Cargo of this size can be placed in tall cabinets or near the refrigerator built into the unit.

The advantage of this box is that it is equipped with convenient baskets that are accessible from all sides. However, if you want to make it into a home pantry, you need to use quality slides that can handle heavy loads.

Corner cargo closet

Corner baskets make especially good use of so-called blind corners. Corner cabinets are difficult to access because they only have one door, usually about 40cm wide, whereas the entire cabinet can be up to 90cm long. This is typically one of the roomiest niches in the kitchen, but its depth can present significant challenges when used. To get to the far corner, you have to partially climb inside, which is very inconvenient. Corner cargos are designed in such a way that they facilitate access to the insides of the kitchen cabinet.

Special systems designed for corner cabinets are more complex than traditional baskets, which results in their higher price. Such equipment usually consists of four shelves on casters. The design is made in such a way as to provide access to all content.

Cargo sizes

You can find a wide range of such baskets on sale.

narrow – designed for cabinets with a width of 15, 20, 30, 40, 50 cm;
wide – designed for kitchen cabinets 60 cm wide;
high – for installation in standard base cabinets up to 82 cm wide, from 120 to 140 cm in height, up to a maximum of 210 cm.

Advantages of cargo

increase the functionality of furniture,
increase comfort of use,
facilitating access to stored products,
practical use of narrow space in the kitchen.

Flaws

increase in furniture costs,
reduction of actual space inside cabinets.

Cargo, as an accessory for kitchen furniture, is one of the most interesting ways to make the overall use of kitchen units and work in the kitchen easier. On the market we can find a huge range of different designs and sizes from different manufacturers, which will allow you to choose the right option for any kitchen. Of course, we must take into account that such systems can raise the overall cost of furniture, but if the budget allows, it is worth installing them at least in the most important places - under or near the sink or stove. If you have a fairly large amount, then it’s worth equipping a corner or tall cabinet with this system, which will be used for the pantry. Such solutions are very useful and greatly facilitate work in the kitchen.

Kitchen logistics is a matter for specialists

To make this process as easy and unburdensome as possible, you need to create a comfort zone within the kitchen. This concept can include:

convenient arrangement of items on shelves and cabinets;

The main advantage of a storage system with metal mesh is its ergonomics and functionality.

availability of every item;

Thanks to the drawers, every item in the kitchen will find its place

ergonomic furniture;

Everything you need is always at hand

minimum effort required when preparing food to move utensils and accessories, food and liquids within the kitchen.

Place everything you need in the kitchen in a closet with all kinds of shelves, drawers, and grids.

The first step towards creating a comfortable and practical environment can be the use of modern storage systems. Today's manufacturers, together with designers, offer to use a variety of drawers for this, which allow you to use the useful space of kitchen furniture with maximum efficiency. Being part of the design of bedside tables, tables and cabinets, they make it possible to gain easy access to any item on the shelf without any extra effort.

Small narrow drawer

Open decorative drawers built into the island part are not only functional, but also aesthetics

Hidden pull-out niche for spices