Advantages of the model
For the first time, furniture with an orthopedic mattress began to be produced in Italy. This is the first country where their production became serial. Since that time, every domestic factory has adopted sofa manufacturing technologies from these foreign partners.
A sofa bed is a great way to save space without sacrificing comfort.
One of the biggest drawbacks of sofa beds has always been the lack of variety . All models copied each other, but over time this problem was solved when new factories began to open.
The first country producing furniture with an orthopedic mattress is Italy
As for other benefits:
- After the sofa is unfolded, a person will receive a full-fledged bed with high-quality sleeping cover.
- A wide range allows you to choose for any amount of free space.
- An orthopedic mattress is safe for the spine. It will not harm your health and will not create discomfort when waking up in the morning.
Orthopedic mattress safe for the spine
- High-quality furniture will have a reliable mechanism that can withstand repeated disassembly and assembly of the sofa.
- In the production of components, a special relief structure is used. It is needed to maintain a full level of ventilation and prevent the occurrence of fungi.
- Bed-sofas have several types of disassembly mechanisms. This will allow you to choose a model that will take into account the characteristics of the room.
Bed-sofas have several types of disassembly mechanisms
The internal structure of this furniture is designed in such a way that the pressure of the entire body will be distributed evenly across the mattress. It follows the shape of all body contours in any position.
Types of orthopedic products
Models of orthopedic sofas differ in the method of transformation, the structure of the filler, and the quality of the upholstery fabric.
By layout mechanism
More often, an orthopedic sofa is purchased for sleeping, so it is important to understand the methods of transformation. Manufacturers use the following types of layout:
- "Accordion" and its improved version "multi-comfort". One part forms the seat, two parts form the back, which is laid like an accordion. The seat is rolled out on rollers, the back rests horizontally behind it, creating a smooth surface without cracks or seams. The sleeping area is wide, but the layout will require at least 1.5 meters of free space.
- "Dolphin". More often they produce corner models; the place to sleep is placed in a section under the seat. The lower part is pulled towards you and the additional pillow is lifted by the loop to the desired height. The linen box is placed in the corner part.
- "Cot". The sleeping area consists of sections that are located inside. The edge of the seat is lifted, pulled towards you and placed on support legs. There are two types of “folding beds” – French and American. The first is not recommended for daily use - the mechanism is not suitable for frequent use, the sleeping area is uneven. The “American folding bed” is made from wear-resistant materials and is considered durable. The mechanism can withstand weights of up to 200 – 250 kg. There is no room left for a linen drawer inside the folding bed.
- "Eurobook". This mechanism is simple: the seat is pulled forward until it stops, the backrest is lowered into the free space. There is a niche for linen inside.
- "Tick-tock." The mechanism unfolds in the same way as the Eurobook, but it has been supplemented with a pantograph that raises the seat by 45 degrees. This prevents damage to the floor.
- "Book". There are two types. In the first, the seat is slightly pulled up and towards you, the back automatically lies horizontally. In the second, the seat is raised, while the backrest leans back. The “book” does not require much free space for layout, but it is placed at a distance of 30 cm from the wall. A depression is formed in the middle on the surface of the sleeping place. There is a section for linen under the seat.
- “Click-clack.” The mechanism is laid out in the same way as a “book”, but intermediate positions are also fixed in it: half-sitting, half-lying. This model has a solid base, so when unfolded it produces a smooth, crack-free surface.
Before purchasing, it is advised to disassemble and fold the sofa several times to check how convenient the transformation mechanism will be. Buyers consider the “accordion” and “eurobook” models to be the simplest.
What types of fillers are there?
Manufacturers produce sofas with spring and springless mattresses. Among the former, only models with independent Pocket Springs differ in orthopedic properties. Each spring is placed in a fabric bag with holes and placed in seven zones with varying degrees of rigidity.
A good sofa has at least 250 springs per square meter. meter, the more there are, the better.
A layer of artificial or natural filler is placed on top and bottom. Such a sleeping place responds to every part of the body during sleep, a person’s weight is distributed evenly, and the spine remains straight.
The basis of a springless mattress is a monolithic filler made of natural or artificial material, which has orthopedic properties. Most often used:
- Polyurethane foam . Synthetic budget filler, consists of small cells. It allows air to pass through well and does not accumulate moisture. The criterion for the quality of polyurethane foam is elasticity and density: the higher it is, the more weight it can withstand.
- Natural latex . It is produced from the sap of the rubber tree. This soft but elastic material does not sag over time and can withstand a lot of weight.
- Artificial latex . This filler is inferior to natural filler in terms of elasticity and strength, but is cheaper.
- Coconut fiber impregnated with latex composition . This natural material is rarely found in its pure form because it is characterized by increased rigidity. More often it is combined with latex layers.
- Memorifoam . The new foam material, which “remembers” the contours of the body, quickly restores its shape.
Sofas with Pocket Springs last an average of 10 - 12 years, those with polyurethane filling 7 - 8 years, latex ones 15 - 20 years.
Upholstery
Furniture fabrics are used for upholstery, which differ in their advantages and disadvantages. Natural or artificial leather is not suitable if the sofa is intended for sleeping - the linen on it slides and rolls down. Here are the common furniture fabrics:
- chenille - strong, wear-resistant, easy to clean;
- flock is durable, suitable for pet lovers, hair does not stick to it and no claw marks remain;
- matting - durable, but not very pleasant to the touch;
- jacquard - looks beautiful, but wears out quickly;
- velor is velvety, looks attractive, but is easy to wipe off;
- artificial suede is a durable material, it is not damaged by the claws of pets, but it is afraid of moisture.
The wear resistance class of upholstery fabric is designated by numbers from 0 to 8, the best indicators are 5 and 6, and leather is marked by numbers 7 and 8. Designers advise that it is good when the color of the upholstery is in harmony with at least one piece of furniture, but bad when the furniture blends in with the walls.
The best manufacturers
Good orthopedic models are mainly produced by Russian manufacturers. Recognized companies are Ascona, Ormatex, Anderssen. They sell expensive but durable orthopedic products and provide a 10-year guarantee on their products. In the catalogs of other furniture factories you will find at least one model with an orthopedic mattress. Furniture, “Color of Sofas”, “Sonit”, “Furniture Profi” are in demand among buyers. Foreign companies often produce guest models that are not suitable for everyday use.
What should a mattress be like?
In the production of beds, several types of orthopedic components can be used in mattresses.
Types of orthopedic components are very important
We are talking about:
- elastic polyurethane foam (PPU);
- independent blocks with springs;
- combination of blocks with zones and PPU.
Polyurethane foam must have a thickness of at least 8 centimeters
In the latter case, the polyurethane foam must have a thickness of at least 8 centimeters, and blocks with independent springs must be made of alloy steel. It is also necessary to pay attention to such a feature as the buyer’s weight. The heavier it is, the tougher the polyurethane foam should be.
You need to pay attention to your weight when purchasing
An option for the picky buyer is a thick layer of polyurethane foam along with spring blocks. But this sofa bed will require quite a bit of free space in the room . In this case, the ideal transformation mechanism would be the “American folding bed” and the “accordion”. They were specially designed for comfort while sleeping.
“American cot” and “accordion” require a lot of space, but are comfortable for sleeping
Both mechanisms allow you to unfold the bed so that the surface of the orthopedic mattress is as flat as possible. Here there is a possibility of joints and places with seams.
As for other mechanisms, it was necessary to invent combined furniture, since the mattress simply did not even fit into such a structure.
Both mechanisms allow the mattress to be as flat as possible
Orthopedic base
Often, an orthopedic base is relevant for corner furniture and sofa beds. Smoothing systems such as “jaguar” and “dolphin” are used to ensure that the sleeping area comes out of the product and folds as tightly as possible with the base.
An orthopedic base is relevant for corner furniture and sofa beds
Such sofas never make you feel tired . You can sit on them for a very long time and not feel any discomfort. In the lying position, the spine is completely unloaded.
The blood vessels work twice as intensely, which will provide the internal organs with a sufficient amount of blood to function properly.
Orthopedic sofas do not cause fatigue
First of all, it is better to pay attention to sofas that have not only an orthopedic base, but also a sleeping place.
How to choose an orthopedic sofa for sleeping?
How to choose an orthopedic sofa for sleeping? Of course, everyone understands that rest is an important part of a person’s life, so you can always find a corner sofa in a store in Ivanovo. Choosing a sofa for sleeping is a very important process. In order for the quality of sleep to be as high as possible, it is better to opt for orthopedic sofas.
The peculiarity of orthopedic sofas is that they have a very hard sleeping area. In addition, such sofas are made taking into account the uniform distribution of the load, special attention is paid to the spine; resting on orthopedic furniture allows the spine to relax as much as possible. It is important that orthopedic furniture does not deform under the weight of a person, therefore, during its production, additional methods are used to strengthen the structure. For example, polyurethane foam padding is used for rigidity. The basis of orthopedic furniture is lamellas. The advantage of slats is not only that they give elasticity to furniture, but also that thanks to them air circulates freely. There are orthopedic sofas that consist of springs that are independent of each other. Such springs also help distribute the load along the entire length of the spine. As a rule, orthopedic sofa cushions cannot be thinner than 15 centimeters. It is important that custom-made upholstered furniture in Ivanovo is inexpensive and made taking into account all technical characteristics. It is this fact that makes the use of orthopedic mattresses in folding models difficult. Most often, orthopedic sofas are called “books”.
What could a sofa be like? TOP 3 types
To produce modern sofa beds with an orthopedic component, almost all possible types of furniture upholstery are used.
Corner modular sofa-bed system
There are mainly 3 types:
- corner modular system using “jaguar” and “dolphin” mechanisms;
- a bed designed for 2 people with an “accordion” and an “American folding bed” mechanism.
- furniture with a triple berth with similar systems.
Double sofa bed with accordion mechanism
What kind of upholstery can it be?
The upholstery material for such furniture can be used in a variety of ways, but it is better to give preference to a fabric orthopedic sofa, they can be as follows:
Flock is one of the most durable and reliable materials.
Flock This is one of the most durable and reliable materials. It is also easy to wash.
Matting This material is no less high quality, but it has one drawback: matting is not the most pleasant to the touch.
Chenille is durable and washes well.
Jacquard The most innovative material. Here the buyer will be offered many colors. But it has a number of disadvantages: jacquard is not durable and is afraid of water.
Velor is prone to wear, but is beautiful and pleasant to the touch.
Faux suede The material withstands damage from pets well. Durable enough, it will last for a long time, but only if you do not test it with water.
Jacquard - an innovative material of various colors
Rules for choosing orthopedic mattresses
After the client chose the type of mechanism and the type of sofa bed, it was time to start selecting a comfortable and high-quality mattress for sleeping.
It is very important to approach this problem professionally. An incorrectly chosen mattress can only harm health and will not allow the owner to fully relax while sleeping. All a person’s muscles should not be tense; only in this case, after waking up, a person will feel light and cheerful.
Orthopedic mattresses are also used to prevent pain in the cervical and lumbar back. The mattress must be made exclusively from natural ingredients. In this case, it will have anti-allergenic, antibacterial and antifungal properties.
How to understand the hardness of a mattress
There are 3 types of hardness of orthopedic mattresses, namely:
1soft;
2hard;
3semi-rigid.
You need to choose a surface that is comfortable for the body.
The latter option is more suitable for people who do not set themselves the goal of getting rid of back pain. This mattress is for those who want to feel comfortable and comfortable while sleeping. But here the individuality of each organism is taken into account.
Soft, hard, semi-hard - 3 types of hardness
Some people find it much more comfortable to sleep on a hard or soft mattress. You need to choose a surface that is comfortable for the body.
A hard mattress is more suitable for a person who suffers from severe pain and also has intercostal hernias.
You need to choose a surface that is comfortable for the body.
Also, this type of surface is perfect for people with scoliosis at any stage of development. In difficult cases, a hard mattress can prevent the progression of the disease and relieve the patient from pain. But in the initial stages, you should not rely on the fact that a high-quality surface will completely cure scoliosis.
A hard mattress is used to prevent back pain
A soft mattress should be purchased by people with low weight. It is often found among girls and children. This type of surface is also well suited for older people. Their bones become more fragile with age, so the mattress should not pose any additional health risks to the owner.
Soft mattress for children and girls
Orthopedic mattresses with and without springs
Buying a sofa bed with or without springs is essentially a personal matter. The main thing is to ensure that the spring blocks are made with high quality. In this case, the surface does not pose a risk to the owner’s health and is as comfortable as possible for sleeping.
Spring blocks must be made with high quality
If you ask an orthopedic doctor for advice, he will most likely advise you to buy a mattress with springs if 2 people will sleep on it, and a springless one if it is intended for one person. This is explained by the fact that a 2-bed mattress should not react to the difference in the weight of partners.
A 2-bed mattress should not react to the difference in weight of partners
To solve this problem, special sofa beds were invented with orthopedic surfaces consisting of 2 parts - one for a man and the other for a woman.
It is also worth considering that you need to sleep on such a mattress correctly. The bodies should not roll towards each other and lie unevenly.
The sofa bed consists of 2 parts - for a man and a woman
Before purchasing a mattress, you need to ask the seller whether it can be returned or replaced. In most people, the spine is curved to a greater or lesser extent. Once people start sleeping on an orthopedic surface, they may experience some unpleasant sensations of discomfort.
You need to ask the seller if the mattress can be returned or replaced
This is normal practice and not a cause for concern. Gradually, these sensations should pass and the spine will return to its natural position. This adaptation to the surface lasts a maximum of 3 weeks. But if this period lasts more than a month, you need to think about returning the mattress or replacing it with another one with a harder or softer surface.
Discomfort from sleeping on an orthopedic mattress is possible for 3 weeks
VIDEO: Sofa models for your interior
Orthopedic sofas
Choosing the most comfortable sofa
Special recommendations for selection
There are certain criteria by which you can choose anatomical sofas for sleeping every day. They should be taken into account when choosing a manufacturer and a suitable model.
Please note the following:
- The metal frame must have the same fittings and high-quality connections.
- The thickness of the sleeping place is at least 80 mm.
- The transformation should be easy.
- Furniture should not creak.
- Upholstery and filling must be chosen of high quality, without damage, holes, or rough joints.
Before buying furniture, you should ask what material all parts of the sofa are made from.
You should definitely pay attention to whether the seller has a certificate of compliance with European standards. After all, a person spends a third of the day in a state of sleep, and low-quality materials will have a negative effect on the body for a long time
Sofa for a child
The choice of furniture for a child should be especially careful. It’s good if the sofa is made of high-quality hypoallergenic materials, and not cheap substitutes, they must be suitable for use in children’s rooms. Fabrics should be soft, pleasant, easy to clean, preferably water-repellent. It is necessary to select the length of the sleeping place taking into account the further growth of the baby.
It is important to know! Another important aspect is the ease of transformation. If the child has reached an age when independent preparation for sleep is possible, the child’s actions should not be complicated and the mechanism must be selected that is safe, reliable, and of good quality.
It is not recommended for children and teenagers to use such material as leatherette. If you have problems with the spine, you should definitely get advice from a doctor about the possibility of a sofa bed option for your baby.
Orthopedic sofa
The highest quality premium sofas for daily sleep are made from the best materials and have an orthopedic effect, adapting to the anatomical features of a person. Modern blocks are produced in the form of separate springs, dressed in a fabric cover. Each part contracts depending on the impact exerted on it.
The mattress takes the shape of the sleeper, does not creak or sag. Typically, latex is used as a filler in such models; it follows the contours of the body and is instantly restored.
