Parts for self-assembly of a rotating table center

A beautiful solution for your dining table will be a rotating center, assembled by yourself, of the diameter and color you need.

The prefabricated spinning center parts are suitable for tables ranging in size from 120 cm to 2 meters or more. The diameter of the rotating center can be from 60 cm to 140 cm, if it is not attached to the table surface, but is simply placed on top. If the rotating center is rigidly fixed to the table surface, the maximum diameter can be about 150 - 180 cm.

If you are looking for something else, look at alternative options.

How to determine the diameter of the spinning center for your table?

The swivel center is easy to use, within easy reach of your hand, and at the same time there is enough space to arrange plates, glasses and cutlery. A square table has a little more space for arranging items than a round one due to the corners.

On a round table, provide approximately 30-35 cm of space around the rotating center on each side, and on a square table, approximately 30 cm.

If the table has the shape of an elongated rectangle, then you can put two or three rotating centers to make it comfortable for all guests.

Table for selecting the diameter of the rotating center for your table

For tables larger than 2 meters, the diameter of the rotating center will be 150 cm or more. In this case, you will need to additionally attach the rotating base to the table surface with self-tapping screws to prevent it from tipping over. A reinforced version of the rotating base is possible

If you have a small table measuring from 90 to 150 cm, check out the Lazy Susan ready-made spinning centers

You can install a rotating center with a smaller diameter. Treats are placed along the edge of the circle so that guests can easily reach with their hands.

Advantages and disadvantages of sliding tables

Tables with a sliding mechanism have the following advantages:

• unusual appearance - you can create a product of any shape;
• when assembled, the table will not take up extra space, which is especially important for owners of one-room apartments;
• the design has good stability provided it is assembled well, so the table can withstand quite a lot of weight;
• it is possible to provide additional functional elements in such a table in the form of drawers;
• if desired, you can make several transformation options at once;
• These are universal products that can be installed not only in the kitchen or dining room, because the extendable table will fit perfectly into the interior of a children’s room, study room, and even hallway.

An extendable table is a functional element of furniture that will not be out of place in any home.

The only downside is that such a design will cost more – if we are talking about a purchased table. If you manufacture an extendable table yourself, the cost is significantly reduced. In addition, some people consider the disadvantage that the table is too heavy, so it is not convenient to use in all cases.

Rotating base BZ for installing a rotating circle-tabletop

PRICES for rotating bases

The rotating base consists of three main parts:

1) The lower support circle ensures the stability of the entire structure on the table.

2) The turntable is designed for installing a round rotating tabletop on it. There are holes for fastening with self-tapping screws. Can be glued with double-sided tape. You can put a glass circle on top. The glass is not attached to the turntable, but is placed on soft non-slip dampers.

3) Rotation mechanism - metal ball bearing for rotary tables.

Rotating base, side view:

An additional service is possible: painting the BZ Light rotating base in a specific color (white, black, brown) - as agreed with you.

To assemble the rotating center of the table, in addition to the rotating base, you only need a tabletop circle of the appropriate diameter and self-tapping screws (or tape).

Procedure for assembling a rotating center on a rotating base BZ, BZ Light and BZ Plus

The round table top is not included with the rotating base. Read more about round tabletops

At your request, you can order a tabletop from suppliers in your city, purchase a tabletop from us, or make it yourself.

If rotating bases are not suitable for you, look at alternative options

You can assemble a spinning center with a round glass top . No additional assembly is required, just a good quality durable glass circle. It is better from dark (tinted) and tempered glass. The diameter of the glass can be equal to the size of the turntable, or be slightly larger (for example, 30-40%). The glass is simply placed on top of soft silicone dampers. Due to its weight, the glass lies on the dampers, does not move to the side, and only rotates together with the platform:

If you plan to place a glass circle on the rotating base, please inform us in advance. We will add glass dampers to the product set.

PRICES for rotating bases

How to order. Payment. Delivery. Guarantee

If such rotating bases are not suitable for you, look at alternative options

Need some advice? We will answer your questions

Reinforced version: BZ Plus rotating base with additional support rollers. Rollers protect the mechanism from excessive load. Now, even if you press hard on the edge of the rotating center, the mechanism will not fail; the load will fall on the rollers. This solution can be recommended for rotating centers with a diameter of more than 1 meter.

BZ Plus base can be attached to the table with self-tapping screws through the holes in the table top.

Complete the rotating base with a round tabletop of the desired diameter.

Example video from our client of a rotating base BZ-60 Plus with a 130 cm circle installed:

About round tabletops: what they are, where to buy

Round tabletops of our production with a diameter of 60, 70 and 80 cm from Egger chipboard

Mechanisms for rotating the rotating center of the table

Lazy Susan rotating table center - general information

Lazy Susan and the rules of table setting in Chinese

Lazy Susan on a modern European table

Quality certificates for the materials we use in the manufacture of products

Do it yourself

Electrical equipment is now quite easy to purchase both through online stores and in retail departments. But doing it yourself is more tempting. There are several main stages of work:

Selection of electric motor

Power 12 V is considered optimal. Folk artists are rich in ideas and generously share them. Motors used:

• from window regulators and car wipers;
• from microwave ovens;
• from cordless screwdrivers;
• changes in timing phase;
• from old electric stoves with grill function, etc.

Many people jokingly and seriously remember the Stirling engine, since the barbecue has its necessary components: a heater (coals) and a cooler (atmospheric air).

Attention! You need to think about the power source for the engine: batteries, accumulator or electrical network. And don’t forget, in the first or second case, to take them charged with you into nature.

Assembling the skewers drive

The ends of the skewers are inserted into the center of rotating gears, which are interconnected into one system.

There are two main types of transmission from spindles (electric motor shafts) used for mechanical rotation of skewers:

• serrated Its disadvantages include transmission rigidity, the need for lubrication and noise during operation;
• using flexible elements (for example, a bicycle chain, belt, tape, cord). Its weaknesses include the possibility of belt slipping, increased load on shafts and supports, increased dimensions compared to gear transmission, and fragility of the belt.

The principles of twisting depend on the preferences of the performer. The central gear can set in motion others located on the sides of it, or one of the side ones turns the adjacent one, and that, in turn, turns the next one.

With the latter option, all skewers are turned over in the same direction, which avoids touching adjacent pieces, and the juice from them will fall on the pieces, leaving their surface juicy. When the skewers are twisted in different directions, the possibility of friction and the skewer falling increases - perhaps when you are not watching.

Rotation mechanism drawing

Peculiarity! The gears must be positioned strictly perpendicular; the slightest misalignment will lead to jamming.

Everyone imagines a rotating mechanism in their own way; the main criteria are availability of execution, low level of financial and labor costs. The craftsmen offer their options one by one, admiring their ingenuity.

Skewers can spin in one direction or in different directions; it is possible to slow down or twist them individually. The friction force of the bead or cable is regulated due to the stiffness of the springs on the outer pulley.

The problem of simultaneous rotation is also solved by a connecting rod transmission, which is important for the principle of rotation of train wheels. The connecting rods located on the axles are shifted by 900. One of the axes is driving, the second is driven.

The simplicity of the idea is embodied in the following diagram. The reels are made of caprolon, and the bearings are taken from the Zhiguli distributor. The belt was used from a non-working printer.

Important! To comply with safety regulations, all rotating parts of the roller must be hidden under the body! Children will be the first to show interest in the moving parts.

Why do you need a turntable?

A rotating cake table is a great find for those who are interested in baking complex confectionery products.

The device has the following advantages:

• significantly facilitates the final processing of the cake, rotating around its axis;
• the pastry chef can decorate the product without moving, which greatly speeds up the cooking process;
• Often there are special markings on the table surface that allow you to create smooth and neat elements.

The rotating stand will help professional confectioners and ordinary housewives create culinary masterpieces.

Diversity of ideas

There are various ideas on how to make a round table with your own hands, which will allow you to get a quality product at minimal cost.

Check it out here too!

• 
  How to make book shelves with your own hands: drawings and step-by-step photos. Wall shelves, floor standing, portable, Montessori book shelf

• We make a kitchen countertop with our own hands: design, methods of application, design options and decor ideas (135 photos and videos)

• How to make garden furniture with your own hands: the best ideas for making unusual and simple outdoor furniture projects (95 photos)

These include the following options:

• round table on a central leg;
• using three or four legs;
• production of a two-level structure, where personal belongings of visitors or bottles of alcoholic beverages can be located on the lower level.

It all depends on a person’s imagination; he sets limitations for himself.

Features of the rotating table

If you want the cake to be accessible to you from all sides at the same time, and at the same time you do not have to run around it, be sure to consider having a rotating stand.

What is a rotary design for cakes? This is a product consisting of:

• round work surface;
• legs-bases;
• rollers, rubber bands.

Thanks to its design, the table easily rotates around its axis and provides convenient access to the confectionery product . With such a supply, you can create elegant and original decors in the most convenient way and create decorations of any complexity. At the same time, you don’t have to worry at all that your masterpiece will move, get damaged, or fall to the floor.

You can either purchase a turntable for cakes ready-made or make it yourself. A homemade design has many advantages. Firstly, you will be able to make a product that will fully meet your requirements and preferences . Secondly, you yourself will be able to create a thoughtful drawing of the product, select materials for its manufacture and think over the most optimal dimensions. In addition, a homemade design will be much cheaper than a purchased one.

A rotating table can be made from any available materials :

Each individual option has its own advantages. Wood is environmentally friendly, safe, and has a texture that is pleasant to the touch . MDF and plywood are easy to process. In addition, this material has a low cost.

But chipboard is inexpensive, looks attractive, and is a pleasure to work with.

How to make a rotating table: design and design choices, plus simple assembly instructions

Thanks to the centrally located rotating tray, each banquet participant can get any dish

Rotating tables are furniture that is in demand in various fields, from advertising to metalworking. But this time you will learn how to make an easy-to-use turntable for home use. I bring to your attention simple assembly instructions, plus recommendations for choosing a suitable design.