Most Ikea beds do not have a slatted bottom; you choose what you like and can afford. I'll tell you about Luroy, the cheapest slatted bottom.
When all members of our family began to have problems with their backs, and subsequently with sleep. They began to look for the root of evil and found old sofas. My husband and I decided to buy beds and new mattresses for all family members. I’ll tell you about the bed and mattresses separately later.
Because the lion's share went on beds and mattresses, they decided there was no difference between a cheap slatted bottom and an expensive analogue. How wrong we were then
The bed is assembled, the mattress is straightened and now it’s time for a test drive. I lie down on the bed and tears begin to flow, but not from joy, but from grief. There is a wild creaking noise at every turn, and our youngest daughter and I will have to sleep on this bed.
They began to look for the root of evil. The springs do not creak and the mattress was twisted in every way. The bed too. And they found that the slats slide along the metal corner and make a squeaking sound when they are loaded. They didn’t wait and believe that it would go away on its own.
In general, screwing the rails did not help.
Padding paper, too.
For two days we thought about it and read a bunch of forums where people have the same problems. A solution has been found. Plastic corner for windows. We cut it and put it on slats and happiness came into our dream. Now there was no fear of waking up my daughter when turning at night.
The most interesting thing is that the eldest daughter has no such problems on a 90 cm bed, but from a width of 120 cm they begin.
In general, if you take a bed from 120 or 140 cm wide, it is better to buy a more expensive slatted bottom, and with this there is a chance of a musical sleep, or even worse, when engaged in marital duty, you may end up on the floor because There have been cases of their breakdown. Or if you are not a fragile person.
But it’s great for children’s beds. That’s why I can say that I can’t say it’s really bad and I won’t recommend it; it’s not worth the money because... miser pays twice.
Flat bottom
A flat base for a bed is created on the basis of plywood, boards, chipboard or fiberboard. It is believed that these structures have already become obsolete, since they are not very comfortable, rigid and imperfect, since if there is no support, the base will sag under the weight of the mattress, and depressions will appear. Agree, sleeping on such a bed is not the most pleasant. The solid bottom has not become widespread because there are no holes in it. This means that the mattress will not be ventilated. On the other hand, if packed tightly and installed correctly, the bed will not creak.
Salon on the Enthusiasts Highway
Moscow, Shosse Entuziastov, 50, (metro Shosse Entuziastov, MCC station Shosse Entuziastov) View on Yandex maps or Google maps
Directions from: Shosse Entuziastov metro station - exit from the glass doors to the right. Walk along the highway in the direction of traffic to house No. 50. The entrance to our store is on the side of the building. View route.
Directions from: MCC st. Enthusiast Highway (path number 1) - platform on the left.
From the last carriage is the first exit. We go down and turn right out of the glass door.
Next, we move straight along the underground passage, get out and walk against traffic for 550m - 7 minutes, go down into the underground passage, and turn left from the passage. Then we go straight 100m.
You have reached house No. 50 - go all the way through it (to the barrier) - from the end of the building you will see the Matras.ru salon. You come! Estimated travel time from the MCC is 9 minutes.
If you are driving, call the store and they will let you into our free parking lot.
Salon opening hours: Mon - Sun: from 9:00 to 21:00
On slats
A slatted bed base is a metal or wooden frame to which slats are attached at a certain distance. The good thing about such a bottom is that it is ventilated; moreover, such designs most often come complete with a bed. This type of bed base is available in several types - with switches, clips, and varying degrees of flexibility. It is believed that this design has unique properties, and sleeping on such a bed is a pleasure. But in reality, the bed base is needed to ensure the strength and quietness of the bed and the ventilation of the mattress itself.
Salon on Shelepikha
Moscow, Shelepikhinskaya embankment 16, (metro station Shelepikha, MCC station Shelepikha) View on Yandex maps or Google maps
Directions from: Shelepikha metro station (yellow and turquoise lines), 1st car from the center, exit towards st. 4th Magistralnaya.
Outputs 1-2. From the metro, exit to the right and walk along the road in the direction of traffic (for reference, on your left across the road there will be Moscow City, then a gas station).
Walking straight all the time, in 3-4 minutes you will come exactly to the salon - it is located in a residential building opposite the overpass).
Directions from: MCC st. Shelepikha (track No. 1) is the second car from the end of the train.
Down the escalator - to the right, after the turnstiles go straight through the glass door. Next - exit 2, turn right and go straight 450m in the direction of traffic - down towards the embankment.
Expert opinion
Smirnova Ekaterina Anatolevna
7 years of experience in interior design, professional architect
For reference, on your left across the road there will be Moscow City, then a gas station. We are located on the first floor of residential building No. 16, last entrance (opposite the overpass). The approximate travel time from the MCC to the salon is 5 minutes.
Salon opening hours: Mon - Sun: from 09:00 to 21:00
Selection rules
You need to choose the slatted base for the bed correctly, since otherwise the mattress will be wavy and will have to be constantly turned over. To begin with, we note that all modern bases are of two types:
- With shock-absorbing components, when the end of each board is equipped with special shock absorbers, the task of which is to support the mattress and reduce the load on it under the influence of the body.
- With racks without shock absorbers. Such structures will not bend if the load on them is increased.
Advantages and disadvantages
It is worth giving preference to the slatted bottom of the bed simply because such a base is considered orthopedic. There are other advantages that distinguish this design from similar devices.
- A mattress placed on a base with slats will “breathe.” The holes between the bottom elements allow air to pass through, providing the product with long-term preservation of its hygienic properties.
- The rack and pinion frame is not very expensive. In addition, it can be built into the bed. In this case, the bottom with lamellas will not need to be selected separately, and you will not have to assemble the entire structure with your own hands.
- The most common version of a slatted base is a product with elements made of natural wood. This is an environmentally friendly material that does not emit toxic substances and does not cause allergies.
- The bottom with slats can be easily disassembled by yourself. If repairs are necessary, replacement of slats is available to any user.
- Some slatted bottom models provide the ability to adjust the position of the slats. They can be slightly raised or lowered, choosing the most convenient option for yourself.
There are also disadvantages to a slatted bed base. They can be considered using the example of the most common and inexpensive design with birch or pine crossbars.
- There are gaps between the slats into which the mattress will fall. Over time, its underside will deform and become wavy.
- If you use a mattress without springs for sleeping, under the influence of constant loads, concave areas will form in it after a short period of time. Sleeping on such a bed will be harmful to the spine.
- A slatted bottom without shock-absorbing devices is not designed for heavy loads. This design is not suitable for a person with a large body weight.
- Individually, each of the lamellas is a rather fragile element. Thin bars are easily damaged and require frequent replacement, which leads to unnecessary costs.
- The maximum service life of the slatted base is ten years. In other varieties of bottom this figure is much higher.
Characteristics of a gas lift for a bed, rules for self-installation
When choosing a base for a bed, you should carefully weigh the pros and cons of each design, so that in the future the product does not cause trouble during operation and ensures a comfortable sleep.
Natural material
Low cost
Easy replacement of elements
Possibility of adjusting the position of the slats
With mechanism
A separate type includes the bottom, which has a rising headboard. Such designs will appeal to those who like to watch TV or read a book on the bed. The same beds are installed for bedridden patients who need to support their body vertically. This type of base has either a manual lift or an electric lift, which is started from the remote control.
Most often, the lifting mechanism is equipped with a linen box, which is obtained by lifting the base. There is enough space here to store bedding, linen, and household items.
Should I or not?
A bed base is not always needed. So, if you have a classic spring mattress, you should not lay it on a lattice base base. It is also important to respect the height of the gap that is formed between the surface on which we sleep and the floor. This is an important factor, especially for allergy sufferers. The ideal height is considered to be 65-70 cm, so when choosing a bottom you also need to take into account the thickness of the mattress. This height is good for other reasons:
- The grate under the bed will become less clogged and easier to clean.
- This height makes it easy to get out of bed.
Salon on Ogorodny Proezd
Moscow, Ogorodny proezd, 10, (metro Butyrskaya) View on Yandex maps or Google maps
How to get there : Butyrskaya metro station, last car from the center, exit the metro doors to the right. Walk a few steps along the direction of traffic to the Green shopping center, go inside and follow the signs on the Matras.ru signs - from the main entrance straight and to the right - you are there!
If you are by car, then enter the parking lot from Rustaveli Street.
Salon opening hours: Mon - Sun: from 10:00 to 22:00
Orthopedic base
The orthopedic base for the bed is a contour made of a metal pipe, complemented by elastic bent-glued elements based on birch veneer and durable holders that secure the slats to the frame. The orthopedic effect has a beneficial effect on the body, relieves the spine, providing comfortable sleep. A well-thought-out design of the base ensures that the mattress will follow the topography of the body, favorably influencing the health of the person lying on it.
The strength of the bed base depends on how many slats it contains. The optimal quantity is considered to be 15 pieces or more, and the distance between the slats should be equal to the width of one slats. The fastening of the lamellas can be different - mortise, overhead plastic or overhead rubber. Rubber holders have proven themselves well, giving a feeling of comfort and having an orthopedic effect.
Which slats to choose?
The bottom of the mattress consists of lamellas, which differ in both width and methods of fastening. Wide lamellas are either mortise or overhead. The advantages of these varieties include an affordable price, but the mortise frames begin to creak over time, and the mattress covering layers are deformed where the slats meet the frame. Bed bases with wide slats are suitable as a base for springless mattresses. They are placed either in a bed box or used as a separate sleeping place.
The production of such crossbars is carried out from high-quality materials, primarily beech and birch wood. Metal or wood are used to make the frame. Orthopedic bases can be additionally equipped with legs, or can be supplied without them. Lattices with wide slats are ideal for mattresses that will last a long time in use. In addition, high-quality ventilation will be provided.
Bed bases that have narrow slats are suitable for both springless and innerspring mattresses. These products are popular due to their versatility and a greater number of support points, which guarantees uniform loading and protects structures from deformation. Transformable crossbars with narrow slats are especially convenient to use.
Manufacturing materials
Slatted bases are made from different materials. Steel lamellas are characterized by increased strength; they are designed for a person with a large body weight. Also, steel slats can be installed in double models. As a rule, not only the lamellas themselves are made of plastic, but also the holders for them. Such devices are not highly resistant to heavy loads, and the fasteners are significantly inferior in quality to rubber fasteners.
Options for placing and designing shelves around the bed, installation methods
The most common material for making slatted bottoms is wood. The most suitable types of natural raw materials are presented below:
- Birch. The slats are made from wood that is 20–45 years old. This is a fairly flexible and durable material with a yellow tint and is easy to process.
- Linden, poplar. An inexpensive option, but strong and flexible at the same time. When operating in conditions with high humidity, you must choose products with a special protective coating.
- Beech. Used in the manufacture of luxury furniture. This is an expensive wood, found in yellow, red or white shades. Plastic raw materials do not deform under high loads, so curved parts are often made from it. The tree is resistant to changes in temperature and humidity.
- Ash. The array of a beautiful light shade is quite durable and elastic. If the drying technology is followed, the wood will be resistant to aggressive external factors. The material has low thermal conductivity and ease of processing. Ash is an expensive type of wood; slats for beds of the highest price category are made from it.
Regardless of the material of manufacture, the slats are laid on the bottom of the bed at equal intervals (from 5 to 7 cm). The width of each lamella varies from 3 to 12 cm. The minimum number of elements is 15 pieces.
Birch
Linden
Poplar
Beech
Ash
Innovation systems
Modern bases for beds are slatted ones, which have metal or bent-glued slats. This frame has an all-welded structure with legs, which can become an alternative to a bed. The best option is a metal frame, which is complemented by wooden slats. Equipping with lath holders is a definite plus, as the anatomical characteristics of the sleeping place are improved.
No less popular are bases that have adjustable stiffness: they are placed in the lumbar area, making it possible to adjust the elasticity of the mattress and its hardness in accordance with individual preferences. Such designs are suitable for people of different sizes and provide increased comfort.
Popular brands
Modern brands offer a wide selection of bed bases of different sizes and designs. Among the popular ones is an orthopedic base for a bed 160x200. This standard size is always available from many companies. Thus, DreamLine brand gratings can improve the orthopedic properties of different types of mattresses - with and without springs. The design is based on a metal frame, complemented by wide crossbars in the form of birch lamellas. Equipped with a mortise system of lath holders for lamellas.
The orthopedic bed base 160x200 Benartti Orto Max is designed for all types of mattresses, including those with a large number of springs and spring blocks. The grille has an all-metal welded frame and is complemented by narrow slats made of birch wood. The advantage of this base is the overhead lat holders, which, coupled with narrow lamellas, ensure accurate drawing of body contours. The peculiarity of the overhead structure is that it increases the strength of the base and reduces the noise level. Bed bases of this brand enhance the orthopedic effect, which is ensured by flexible slats made of multi-layer wood. This protects the mattress from deformation, extending its service life.
"Ascona"
This brand offers a wide selection of mattress bases of different types and design features.
For mattresses, such a lattice is simply ideal, since the platform under it is created flat. Durable and moisture-resistant plywood is used for the frame. Thanks to its flexibility, elasticity, and multilayer structure, the material can withstand heavy loads. The design features are such that the ends of the lamellas are firmly attached to the metal frame. The frame design in some models is non-separable, which should be taken into account when installing an orthopedic base in small rooms.
In the Rollmatratze line you can find simple and unusual models of bed frames, and in them you can adjust the rigidity of individual zones. Some bed bases of this brand are equipped with flexible spring plastic holders that fit around the shoulders and pelvis. The advantage of the lattice is the ability to individually customize the mattress, which will ensure maximum sleeping comfort. All products are made from environmentally friendly materials, which ensures good ventilation.
What to look for when choosing
When choosing a bed with a slatted bottom, you need to consider the following points:
- The length of the structure with slats should be 20 cm greater than the height of the potential owner.
- The optimal height of the base above the floor level is 60–70 cm.
- The frame with slats should exceed the width and length of the mattress by several centimeters.
- The bottom with legs creates conditions for good ventilation of the mattress, which has a positive effect on its performance characteristics. The supporting elements themselves must be as strong and stable as possible.
- You should trust your choice to trusted manufacturers with a good reputation.
How to choose an adult and children's mattress for a bed, tips for housewives
If funds allow, it is better to choose a model that provides additional functions that significantly increase the level of comfort when using the product.
- Adjustable top and bottom bottom. In such beds you can create the ideal sleeping place for a specific user. There are models with mechanical control, as well as those in which an electric drive helps regulate the rise of the base. The last option is the most optimal for medical furniture.
- Changing the hardness level. Special plates installed in the central part of the bottom allow you to customize the base according to the user's wishes. When these elements move apart, the bed becomes more rigid. The reverse action ensures the elasticity of the slatted base. By adjusting the rigidity of the slats, you can create optimal conditions for the position of the spine during sleep.
- Depreciation. Special devices attached to the ends of the slats distribute pressure from the weight of the body over the entire surface of the mattress. They help a person maintain a comfortable position while sleeping. The orthopedic properties of a bed with shock absorbers are important for people suffering from back pain.
Sleeping furniture with slatted bottoms is becoming increasingly popular. Available to consumers with an average income level, easy-to-assemble, comfortable designs with an orthopedic effect provide comfortable rest while sleeping. By choosing modern, improved models, the user can customize each lamella of the base to the individual parameters of his body.
Height of base above floor level
Matching the frame with lamellas to the dimensions of the mattress
Stability and strength
Trusted manufacturer
