How to disassemble a corner sofa: for transportation and transport, diagram and features of the sofa

Specifics and differences

In the simplest case, such a sofa consists of three key parts: central, corner and sidewalls. Moreover, despite the huge variety of models offered, there are three main types of corner sofas:

L-shaped two-section. As a rule, the central part is complemented by a solid corner element, which is usually an ottoman, or less often a sofa. In fact, this solution provides two full-fledged sleeping places.
L-shaped three-section. A modified scheme that differs from the previous one by the presence of a corner insert. That is, the corner part is attached to the central part with the help of a kind of “intermediary”. By type of execution, most often it is a sofa.
U-shaped. The difference lies in the presence of corner sections installed on both sides of the central part.

In addition to the design design, sofas also differ in the type of mechanism, the method of fixing the sidewalls and the presence of additional (optional) elements: drawers, cabinets, bar pockets, and a table.

Bed and sofa made of pallets

If desired, you can build a sofa from pallets, which is created approximately according to the same scheme as presented above. How to make a sofa from scrap materials that does not require significant expenses? Choose a pallet as a base, that is, pallets of different sizes. Folding pieces of furniture made from them are compact and do not take up much space in one room, and therefore there is room to put an armchair or table. This is a significant advantage of such models. What to put in the corner is up to you to decide.

How to disassemble a corner sofa

Dismantling such structures, in principle, is not difficult, but due to the bulkiness of the components, it is advisable to do this together, although some models can be disassembled by yourself.

Disassembling upholstered furniture into individual elements simplifies loading and unloading.

What is needed for this

First of all, you need an assembly plan - it will also be useful for disassembly. If there is none, you need to either independently analyze the circuit diagram (which is not always possible), or search on the World Wide Web.

Use professional tools to disassemble the sofa.

Based on the universal concepts of modular structures, you will most likely need:

Screwdrivers. It is better to prepare both spline and cross.
Set of open-end wrenches.
Screwdriver.
Hammer.
Containers for storing small parts.

Note! Since it may be necessary to disassemble a sofa in more detail than provided by the manufacturer, you may need a construction stapler and staples for it, since some of the fastening elements are located under the upholstery.

Use the tool carefully to disassemble the sofa.

Existing differences

Despite the small number of schematic diagrams, corner sofas differ mainly in the design of the transformation mechanism. The most popular options are:

"Dolphin". The organization of the berth occurs using a roll-out platform, which is located below. The process is quite simple: the platform is pulled out from under the seat, and the attached part is lifted using a special grip.
"Book". The classic version, known since Soviet times. To unfold the sofa, you need to lift the seat and move it back until you hear a characteristic click, then return it to its place.
"Eurobook". To unfold it into a “bed” state, simply roll back the central part and lower the backrest. An excellent option that makes it equally convenient to disassemble a corner sofa and use it every day.
"Accordion". An unusual design solution that, when unfolded, resembles the stretching bellows of an accordion or the parted sloping roof of a house. The back, seat and additional section are a single unit, held by a three-section hinged frame.
Sedaflex. The organization of the berth is carried out using a separate unit located under the seat, which includes a mechanism and a soft substrate. It varies in the number of frame sections. A similar principle of operation is implemented in the so-called “American” scheme, as well as in the “French clamshell”.
"Pantograph" or "Tic-Tac". The transformation process resembles the movement of a pendulum. Actually the same performance as Eurobook. The only difference is that the central part moves in an arc, and not in a straight line.
"Click-Clack" Non-separable option. Unfolding is carried out using a small force directed away from you (or towards yourself). Actually, the name reflects the characteristic sound of the locking mechanism when changing position.

What is the transformation mechanism of the “dolphin” sofa?

The dolphin mechanism is usually used in corner sofas; this configuration allows for maximum sleeping space when unfolded. This system is also found in straight structures, but less frequently. The Dolphin can also be equipped with various transformable chairs.

In the case of corner upholstered furniture, transformation occurs within the area occupied by the sofa, so reserving additional free space (as is often the case with other types of sofas) is not required. The “dolphin” transformation system is roll-out. The mechanism itself consists of two main elements. The first is in the seat, the second is in the roll-out platform.

The transformation mechanism of the “dolphin” sofa is a movable steel structure and rigidly fixed guides, for the manufacture of which durable wood is used. The base is produced using the cold stamping method. The movement of the frame is carried out by means of polyurethane rollers fixed to the base of the brackets.

The frame is usually covered with laminated wood boards or thick plywood (sometimes it can be other materials). This gives strength to the structure and serves as the basis for installing other elements:

various accessories,
legs,
pillows

The latter, meanwhile, can be made from a variety of materials and include either elastic filler or spring blocks.

The “dolphin” transformation system has many modifications, the main differences from each other being in the design of the mechanism. The operating principle of the options remains unchanged. Under the seat there are two retractable sections, one of which is recessed into the second. When unfolded, both halves slide out to form a large sleeping area.

The frame of the “dolphin” mechanism is also equipped with a system of springs and levers that make it possible to easily raise one half of the section to the level of the second and reliably fix the sofa when unfolded.

Armrests are a necessary component of all sofas, although quite often there are models without them. Upholstered furniture with the “dolphin” transformation system is no exception and may also include:

built-in drawers - necessary for bedding and other small items;
lighting is a fashionable innovation that does not provide any additional conveniences, but is a very effective innovation.

The frame of the sofa itself can be made from glued wood in cheap models, or solid wood in more expensive products.

How to disassemble a corner sofa for transportation: work diagram

Before you begin dismantling structural elements, you need to organize your workspace, clearing the room of all unnecessary things. In addition, it is necessary to remove armrests, covers, pillows from the sofa - everything that can be removed without using tools.

Disassemble the sofa down to its base.

In general, the disassembly process occurs according to the following scheme:

Place the sofa in a comfortable position for work. It is advisable to have free access to all its sections.
A brief analysis of methods for attaching structural elements to each other. At this stage it will become clear what tools may be needed.
Removing the sides. Often the side parts are installed using hooks. In this case, you just need to remove them. If the fastening is more complex, use the prepared tool. Some designs hold the sides together using a beam running behind the backrest.
Divide the main sections. If the back or seat allows dismantling, remove them. Dismantle the corner section in accordance with the design features (it may not be dismountable). Remove the lift-up top from the ottoman.
Dismantle the transformation mechanism. Since you need to disassemble the sofa into as many parts as possible, this stage can present a rather unpleasant surprise. The fact is that some solutions do not involve removing the mechanism without completely disassembling the structure. In this case, it is better to leave everything as is.
Arrange the parts in an order convenient for packing.

Many sofas can be disassembled following the instructions.

Scheme

As for the step-by-step instructions, first of all it will depend on what kind of design the sofa has. Domestic manufacturers offer angular and straight models to consumers. In the first case, the shape of the product is U-shaped or L-shaped. The transformation mechanism in this situation involves extending the lower part of the seat. The sleeping surface increases due to its movement.

Direct options are represented by models with a horizontal seat and a vertical backrest. Most often they are arranged into “accordion”, “book” and “eurobook” types. Taking into account the above features, dismantling is required differently in each case.

Direct

Before starting dismantling work, you should carefully inspect the structure. Particular attention should be paid to the backrest. In the case where the fasteners are under the upholstery, first carefully separate the edges of the material from the frame. Staples and nails are pulled out with special tools.

The seat is positioned vertically and laid on the back. The sides are unscrewed. The fittings holding the seat are removed, after which the backrest fasteners are removed. raises the fewest questions . The back and seat act as a monolithic compartment. It is enough to simply remove the sides and separate the moving lower part.

For a sofa with an accordion mechanism, the headboard is removed, after which the triple frame is rolled out. After lifting the seat, you need to unscrew its fasteners. If clamps are used, they are also removed. Eventually the structure is divided into 3 parts. The first is the box for underwear, the second is the paired sides, and the third is the transformation mechanism. At the very end the legs are removed.

Corner

In this case, the product must be moved to the center of the room. The seat rises and the side parts are separated. The corner compartment is separated from the short and long ones. Soft elements are removed.

If the short compartment has a back, it also needs to be unscrewed.

Next, the laundry storage compartment is detached. For moving, you must pack each part separately.

If you had to remove the upholstery, you can put it back by securing it with a stapler for construction work.

If work is carried out with expensive models, a number of them have armrests made of polished wood. Such a surface is quite vulnerable to external influences, so the products must be packaged using corrugated cardboard. The shell is fixed with tape.

To work with corner models, you will need a flat-head screwdriver, as well as open-end wrenches of different sizes. If there are branded fasteners, it is better to contact a specialist to remove them. It should be taken into account that such sofas have impressive dimensions, so transporting them can become problematic. You should disassemble the product as much as possible so that it does not get stuck in the opening.

What's the best way to pack?

To avoid damage to soft parts or polished wooden inserts during transportation, all individual elements must be well packed. Corrugated cardboard, stretch film or cellophane in a roll, as well as adhesive tape are most often used as packaging.

There are special rolls of cellophane for wrapping a sofa.

First of all, you need to pack the sides. If they are transported together, it is better to cover them with a sheet of thin fiberboard or corrugated cardboard. It is advisable to use the latter when preparing the mechanism for transportation, which is fixed in such a way as to prevent spontaneous opening.

This tape will help preserve the sofa.

Then the entire assembly is covered with corrugated cardboard and tied together with twine or tape, as appropriate. The same applies to the drawer with the back, if they are one whole.

Transportation rules

An important point when transporting furniture is to prevent it from moving freely in the back of the car . To do this, you need to secure it with a rope or stops. To avoid accidental staining, lay it down with cardboard. Try to initially place the overall part in the body of the vehicle, and the sidewalls and blocks can be placed nearby as stops. It is better to put pillows and other small items on top. It is advisable to use freight transport for transportation, but in order to save money, you can transport it in your own passenger car. To do this you will need a roof rack and a large interior. The main part of the sofa can be secured on top; before doing this, it is advisable to pack it well; it is better to transport small parts in the cabin and rear trunk.

Subscribe to our Social networks

How to disassemble a corner sofa?

In each specific case, the disassembly process strongly depends on the circuit diagram and type of transformation mechanism, which can have a significant impact on both time costs and the complexity of the work.

Type "Eurobook"

The simplest design from the point of view of dismantling. Disassembly occurs according to the generally accepted scheme. First of all, you need to remove the seat. For such sofas it is usually simply removed. Then you need to disassemble the sides.

The “Eurobook” type of sofa can be easily disassembled.

You may need an open-end wrench here. The backrest and bed linen box are one piece.

Pantograph type

This type is derived from the previous model and is disassembled in a similar way. The only difference is the folding mechanism. Therefore, before disassembling the sofa, you need to select the appropriate tool for dismantling it.

Pantograph is an improved model of the Eurobook.

Next, you should follow the scheme described above.

Dolphin type

Since this design is equipped with a roll-out platform, the dismantling process will be different. First of all, you will need to remove the rear screen, below the backrest. This will give access to the inside of the seat shell.

Transformation occurs by extending the box where the mechanism is located.

Here you need to use a tool and separate both parts (you may need a flashlight). The sides are removed in the usual way.

With "Accordion" mechanism

In this case, you need to start by dismantling the sidewalls. Such structures are usually equipped with a tie beam that extends behind the backrest and holds the opposite side parts. It needs to be removed first.

It only takes one movement to unfold.

Since the three-section Accordion mechanism is mounted on a pallet box, before disassembling the corner sofa, you will need to remove the headboard from the grooves and move the entire structure further away for ease of work. The final stage will be to dismantle the box: you will have to turn it over and unscrew the bolts or, depending on the design, release the clamps. The result should be three separate elements: a transformation mechanism, two sidewalls and, in fact, a drawer for linen.

Dimensions of the click-klyak sofa when assembled

When buying a sofa with a click-clack layout mechanism, you should keep in mind that there are three different models, differing in dimensions:

Model	Width, cm	Depth, cm	Height, cm
For children	110-130	40	75
For teenagers	190	65	85
For adults	200	75-100	95

These are average overall dimensions, so if necessary, you can find an option that will be ideal for your home.

Precautionary measures

First of all, you should adhere to safety precautions when working with the tool. It is necessary to take all possible measures to avoid injury when dismantling bulky and heavy parts of the structure. It's better to do it together.

Invite friends to disassemble the sofa.

In addition, many sofas have a special fastening, which uses branded hardware and mounting elements. It is advisable to put them in a separate place. You must also use hand tools carefully to avoid damaging the upholstery or scratching the armrests.

The more functional the sofa, the more parts it can be disassembled.

In some cases, it is permissible to leave parts of the structure assembled if they cannot be successfully separated, and brute physical force must not be used.

Features of a sofa with a roll-out mechanism

The device in question requires a certain approach. It is recommended to install this model in:

Studios where you need to define each zone for its purpose.
A small apartment that requires saving space.
A bedroom with the same requirements.
Children's. In such spaces, a large space is most often required for the child to play.
Living room.

The product itself is small in size. And if you fold it, you will need minimal storage space. As for movement, you don't have to worry about the appearance of damage, since they appear extremely rarely.

How to transport it correctly?

Transportation rules assume that all parts are properly packaged and prepared for movement (have gripping units). You need to make sure once again that you have a diagram of how to disassemble a corner sofa for transportation. In addition, it is necessary to ensure that all small parts and fasteners are transported in a separate container.

The corner sofa consists of blocks, which are disassembled according to the principle of the designer.

In general, the rules for transporting large items recommend doing the following:

Before ordering a furniture van, measure the dimensions of the largest parts.
Check the reliability of fixation of the moving parts.
The largest structures should be loaded first.
Arrange the sofa elements in the body so that the heaviest parts are at the bottom.
Provide additional fixation to prevent movement of parts and assemblies during movement.

How to disassemble a corner sofa for transportation should concern everyone who is the proud owner of such furniture.

Disassembled? We transport!

Once your sofa has been disassembled into its component parts, there is no need to rush to load it into the car. Firstly, you risk staining or damaging the upholstery, and secondly, wooden elements may lose their presentation even at the loading stage. To prevent this from happening, the sofa must be carefully packed. Take a few rules into account.

For packaging you will need cardboard, plastic film, bubble wrap and tape.
All elements are packaged individually: hard corners and edges are padded with cardboard, soft parts are wrapped in several layers of film.
Each layer of packaging must be secured with tape.
With the right approach, a well-packed sofa will not get dirty, wet, or scratched during a move.
Don’t forget to put all the fasteners in a separate container with a lid. Then it will be easier to put the furniture back together without wasting time looking for lost fasteners.

join the discussion

Share with your friends

When changing their place of residence, people begin to wonder about transporting furniture. This often requires dismantling it yourself. Therefore, skills about the rules of disassembly and information about the design of the sofa will be useful for every person. We'll talk about this in more detail in our article.

It’s clear how to disassemble a sofa, but how to assemble it?

If the sofa was disassembled independently, the assembly process should occur in the reverse order of the dismantling process:

Arrange all parts according to the existing diagram.
You should start with the linen drawer and the backrest.
Mount the transformation mechanism.
Attach the corner piece.
Attach the sides.
Check the strength of the structure and the functionality of the mechanism.

Important! During the disassembly process, it is important to record the sequence of operations performed, for example, periodically filming what is happening on the phone. In addition, it makes sense to draw up your own diagram of the parts, applying appropriate markings to them.

The more functional the sofa, the more parts it can be disassembled. As you can see, there is nothing super complicated in this matter. The main thing is to understand how to disassemble a corner sofa, and also to have a diagram, the right tool and an assistant on hand.

With proper handling and careful transportation, taking all precautions, the sofa will easily move into its new place. Exactly the same as it was before!