Comfortable French folding bed: 2 opposing opinions about it

Types and types of mechanisms

Today, furniture production has a large number of types and types of mechanisms. The photo below shows only some of them (the most common):

Click-clack

The click-clack mechanism has three positions, one for lying down and two for sitting. Usually installed on modern lamella-type models.

Meralax

Meralax is one of the reliable French clamshell layout mechanisms. It has an orthopedic effect in two versions - lamella and metal weaving.

Dolphin

The “dolphin” mechanism is exactly the option that combines compactness and convenience. The seat is attached to the side parts of the frame, pulling the mechanism out of the niche “towards you” to the upper horizontal position by the transverse bar and we get a full-fledged sleeping place.

This is the simplest of all existing mechanisms. When made of high quality, it is stable and durable, but, as a rule, the metal from which it is made leaves much to be desired.

Accordion

The “accordion” mechanism is one of the most popular mechanisms for transforming sofas; it has three layout positions.
One part is fixed, the other two have moving parts that are secured with locks.

Now it is installed mainly on modern models of upholstered furniture.

The most common mechanism is installed on a sofa book. It is quite simple in layout and has a number of advantages over other models. The entire structure is made of thick metal and high-quality rivets.

You can also familiarize yourself with other types of sofa transformation mechanisms in the article Review of sofa transformation mechanisms.

The models presented in the photo have their own individual characteristics. Here, not only the angle of inclination plays a role, affecting the lowering and raising of the weight, but also the material from which they are made.

Many manufacturers use thin-walled metal and very low quality rivets for these mechanisms, which is why the furniture becomes unusable in a very short time.

If it is not possible to replace broken mechanisms with new ones, you can make repairs at home. Of course, it won’t always be possible to do everything as it should, but it is quite possible to extend and give a “second” life to the furniture.

The Best Folding Beds for Adults

Furniture is used not only to organize a temporary place to sleep, but also for daily use. Standard models of adult folding beds are presented in a wide range. They have different purposes: camping folding beds, structures for the home, fishing or garden. Folding beds are often complemented by thick mattresses and have a slatted base.

Nightstand bed “Lorena”

Country: Belarus

Price: 6590 rub.

Rating (2020): 3.3

The Belarusian-made model is distinguished by increased comfort and European design. With its help, you can easily organize a comfortable holiday in the garden or at the dacha. The frame of the folding bed is made of steel; powder coating is used to protect the metal, guaranteeing the absence of corrosion. The base of 15 wooden slats is responsible for ease of use.

The product comes complete with a mattress. The internal filling is two layers of sheet foam. One is 70 mm thick, the other is 20 mm and has a memory effect. The design is protected by knitted “breathable” fabric. The furniture is comfortable and easy to use due to the automatic folding of the leg supports.

The folding bed is manufactured in accordance with international standards ISO 9001 and has quality certificates. When unfolded, its dimensions are 193x79x44 cm, when assembled – 111x80x34 cm. The weight of the product is 18 kg, the maximum load is up to 180 kg.

Advantages

• Durable design.
• Reliable transformation mechanism.
• Comfortable mattress.

Flaws

• Heavy weight.
• High price.

Folding bedside table “Hotel”

Country Russia

Price: 3490 rub.

Rating (2020): 3.5

The folding bed is a complete place to relax. It can be used both at home and in the country. The frame is made of steel pipes equipped with wheels, allowing you to easily move the furniture from place to place.

The product has an orthopedic base made of 14 lamellas - strong and durable slats. During loading, the base does not bend and holds the body in the correct position. The set includes a mattress 10 cm thick. The maximum load is 120 kg, which is not too much compared to analogues. But the load is distributed evenly due to the presence of four legs.

Prestige-2

Country Russia

Price: 2800 rub.

Rating (2020): 3.5

The design is made in the form of a transforming bed-table. The frame is made of steel pipes with a diameter of 22 mm. The metal is coated with powder paint, so rust does not form on the surface even after prolonged use. The kit does not include a fastening strap or a case, but they can be purchased separately.

The folding bed is equipped with an 8-centimeter mattress with Holcon filling. The stock is made of wooden slats and can withstand a load of up to 120 kg. The manufacturer “UralServisStroy” focused on durability and convenience, so the model is well suited for use at home.

The overall dimensions of the structure are 115.2x70.7x27 cm when folded and 190.5x80x36 cm when unfolded. For ease of movement, there are wheels located on the middle supports. The mechanism is reliable; even without a special strap, the folding bed is stable.

Angelica KT-03L

Country: Belarus

Price: 2600 rub.

Rating (2020): 3.6

The folding bed from the manufacturer BelHailer LLC is distinguished by a durable steel frame; 25 mm pipes were used in its manufacture, which significantly added weight to the model. Its weight is 12 kg. The set includes a mattress 5 cm high. Sheet foam rubber is used as a filler. If you use the folding bed actively and for a long time, over time the material may sag a little. Polycotton is stretched over the foam rubber, which is not afraid of washing and does not require special care.

The dimensions of the structure are 1900x800x285 mm and 900x800x250 mm (in the unfolded and folded state, respectively). The base is made of slats, so sleeping on the folding bed is comfortable. It does not take up much space and can be used both in the country and outdoors. The maximum permissible load is 120 kg. The cost of furniture is affordable for every buyer, which makes it in demand on the market.

Dametex Veronica

Country Russia

Price: 2690 rub.

Rating (2020): 3.7

An inexpensive classic clamshell model based on a polymer-coated steel frame. It has dimensions of 190x80x27 cm and can withstand up to 150 kg of weight. Compared to other products in this class, it is characterized by a large weight of 15 kg. A galvanized mesh is used as the base; the set includes a comfortable mattress 80 cm wide and 10 cm thick.

The folding bed can be used outdoors, at the dacha and when guests arrive. It will not replace a full bed, but as an additional bed it will be a good option.

Go Garden CAMPER

Country: China

Price: 2691 rub.

Rating (2020): 4.3

A very light and yet durable model that will be appreciated by lovers of outdoor recreation. It is lightweight (5 kg) and compact. A durable fabric is stretched around the perimeter of the steel frame. There is no mattress included, so the folding bed is more intended for trips out of town. Its dimensions are 189x58x28 cm when unfolded. Thanks to its lightness, you can take it with you on trips without fear of damaging the product. Oa is considered one of the best options for organizing temporary overnight accommodation.

Repair of the “sofa book” mechanism

Before starting repairs, you need to determine the extent and cause of the breakdown. As a rule, it is mainly the rivets of the guide strip that are bolted to the sofa frame that break here. They fly out completely or wear appears, leading to an increase in gaps.

For work we will need tools:

1. Drill or screwdriver
2. Rivets
3. Hammer
4. Anvil or any other massive stand

It is necessary to firmly fix the mechanism on the table surface, for example, using clamps. Using a drill, we drill out the broken rivet, starting with a small drill and gradually moving to the desired size.

To select the required drill diameter, the size of the rivet and its thickness, we measure it with a caliper. We insert it into the hole, with the cap down, and the part that will be riveted should face up.

If it is not possible to repair the mechanism using rivets, the bar can be secured using a bolt and nut.

Here it is very important to choose the right length so that the bolt does not rest against the frame from the inside, because cutting it off after installation will not be very convenient!

DIY repair of a French folding bed

Have you not yet read the contents of the French folding bed repair ? The main idea of ​​this page is that most French folding beds cannot be repaired. But still, in some cases, you can repair a folding bed yourself, if you have skillful hands. There are no contradictions between these pages. It is difficult to predict how a not-new folding bed will behave after repair and how long it will last, so we do not undertake to give guarantees or bear responsibility for the further performance of the mechanism. But you can try to fix some common defects yourself. These types of folding bed repairs include:

• Breakage of the rivet connecting the moving parts of the mechanism frame.
• Raising the foot part of the mechanism when pressing on the middle part of the French folding bed.

Rivet breakage

If a rivet breaks, repairing a clamshell is reduced to replacing the rivet with a bolt. Breakage of the rivet connecting the moving parts of the frame of a French folding bed occurs quite often and is a consequence of the lack of lubrication of the rubbing parts of the frame or such a natural process as wear. The rivet can be replaced with a screw or bolt with an M 8 thread. When using a thinner axis, for example an M 6 bolt, a large backlash will form between the bolt and the hole in the part, which will change the geometry of the frame. The advice is quite banal, but in practice it is often M 6 that is installed. When replacing the rivet, it is necessary to take into account that the nut or protruding parts of the bolt may interfere with the folding and unfolding of the mechanism.

The foot part rises when you press on the middle of the folding bed

The defect is due to a malfunction of the part that holds the French mechanism in a horizontal position when unfolded. If a mechanism with such a defect is used for a long time, repairing the folding bed will not give a positive result; over time, the horizontal position lock will work.

The causes of the defect may be:

• Failure to comply with the installation width of the sofa. When the installation size is increased, the movable part to which the long side spring is attached does not engage with the horizontal position lock of the mechanism. Standards for installation sizes of French folding beds can be found on the page table of standards and sizes of French folding beds .
• Initially, incorrect installation of the French folding bed in the sofa. In this case, this defect appears from the very beginning of operation and may be associated with non-compliance with the installation height of the mechanism from the floor.
• Frame lubrication. Lubrication helps the movable part of the clamshell frame slide past the stop, which fixes the mechanism in a horizontal position. To prevent the occurrence of a defect, lubricate the mechanism in this part carefully, do not allow oil to get on the latch.
• Wear of a mechanism part. With each slip, the parts that should engage are worn away . If you use a mechanism with such a defect for a long time, repairing the folding bed is hardly possible.
• Deformation of the frame part holding the unfolded mechanism in a horizontal position.

Before you start repairing, a little about “safety precautions”. When repairing a folding bed yourself, if you have no experience, use someone else’s help to control the position of the mechanism in the sofa. When bending the clamp, the key abruptly flies off the part being bent. To avoid injuring your hands, wear gloves when performing repairs.

To eliminate the defect, remove the mattress (the mattress does not interfere, but without a mattress the mechanism is easier), place the folding bed in the sofa and turn the sofa onto its back. In this position it will be easier for you to bend the latch. If you have a corner model of upholstered furniture, first disconnect the sofa from the rest. Set the mechanism to the middle position, approximately 45 degrees relative to the sofa. In this position, at the bottom, under the lower part of the back of the sofa, there is a movable connection with a latch that you have to bend.

The easiest way to do this is to use either a small adjustable wrench or a hammer. Repairing a clamshell with a wrench is more humane. Make a gap between the jaws of the wrench slightly larger than the thickness of the latch, that is, about 3-4 mm, then put the wrench on the latch, finally connect the jaws so that the gap between the jaws of the wrench and the latch is minimal, and bend the latch toward you like a lever.

After this, an acute angle is formed between the clamp and the plane of the part, instead of an obtuse or right angle. In this case, the movable part of the assembly, resembling a boomerang in shape, to which the end of a long side spring is attached, when trying to slide past the latch outward, will go inside the corner and be securely fixed in this position.

If the repair of the folding bed did not produce a positive effect, the only option to solve your problem is to replace the mechanism.

Source

Repair of the sofa mechanism “Click clack”

Today, the quality of operation of “Click Klyak” mechanisms leaves much to be desired. Manufacturers do not pay much attention to strength, counting on a large frame area (the larger the area, the more stable the product).

The body bends in places where the weight is localized, since it is made of sheet iron, and this breaks the transformation lock itself.

At home, making repairs can be very problematic; only complete replacement is possible.

In order for the mechanism to serve for a long time, it is necessary to lubricate the rubbing joints in a timely manner.

In the figure below they are shown by arrows.

A common cause of breakdown and rapid failure of the mechanism is incorrectly tightened fastening bolts between the wooden frame and the mechanism.

During operation, large gaps appear, which lead to distortions and wear.

Repair of a sofa roll-out mechanism

The roll-out mechanism of a sofa is one of the most durable and reliable structures, but, as it turns out, it can also become unusable in a very short time.

The reason for this fragility is the poor quality of the layout elements, in particular the rollers. For reliable disassembly and assembly of the mechanism, the rollers must rotate easily and slide unhindered across the surface.

Watch the video of how a home mechanic changes the guide roller of a sofa with a Dolphin mechanism:

This article described only the main causes and options for breakdowns of sofa transformation mechanisms, which almost any owner can do without special training.

Benefits of a homemade bed

Before deciding to make a folding bed yourself, you should consider the advantages and features of this design:

• the piece of furniture will have the desired shape, dimensions that will fit the dimensions of the room;
• You will independently monitor the quality of the elements used and assembly;
• this option is much cheaper than buying a finished product;
• a self-made folding bed can be placed anywhere;
• the construction does not require things that are difficult to find on sale.

Before deciding to make a folding bed yourself, you should consider the advantages and features of such a design.

When we purchase furniture in a store, it is difficult for us to assess how high quality and reliable it is. For this reason, it is safer to build it yourself using high-quality materials. This is only possible if you have the appropriate knowledge and skills.

When we purchase furniture in a store, it is difficult for us to assess how high quality and reliable it is.

It will be useful: How to distinguish natural nubuck from artificial

Warning

You should always remember that only a trained specialist with the necessary set of tools can carry out a major repair of the sofa folding mechanism. He will always be able to accurately determine and eliminate the cause of the breakdown at a high quality level.

Without the proper experience, such repairs can lead to even greater malfunctions, therefore, if a problem is discovered, very carefully study the cause of the breakdown of your favorite sofa, evaluate the complexity of the design and your strengths, and also, if you still decide to repair the sofa mechanisms yourself , approach the process itself very responsibly.

DIY sofa repair: fixing common problems

Repairing a sofa with your own hands is not as difficult as it seems at first glance. Even high-quality upholstered furniture becomes unusable after a while, because the springs are often deformed, and the wood frame can crack due to heavy loads. Yes, you can buy a new sofa, but such a purchase can significantly affect your budget. But don’t despair, because many damages can be corrected by repairing and reupholstering the sofa.

DIY sofa repair

What is a lamella

Before you begin, you need to familiarize yourself with the description of the features of the lamellas in more detail. Lamels are wooden structures that have a curved shape. Their characteristic features include a high level of elasticity and elasticity. It is thanks to these features that the mattress can be securely fixed.

Such wood products are laid out at a distance of 2-5 centimeters. This allows slatted beds to be used by both thin and overweight people. The thickness of one plank reaches ten millimeters, and the width does not exceed thirty. However, cheap beds can use boards 4-5 millimeters thick.

Main causes of breakdowns

Sometimes people find that the board in their bed is broken. There are several main reasons why a wooden plank can break:

1. Exceeding permissible loads. Wooden slats have certain load limits that should not be exceeded. However, some people still overload them, which later leads to breakdowns. Therefore, it is recommended to familiarize yourself with the permissible loads of the slatted bed in advance.
2. Marriage. Sometimes manufacturers install low-quality products made from defective wood. This often happens when using overdried wood, which quickly breaks even under light loads.
3. Long-term operation. Slats may break if used for more than ten years.

How to choose new ones

Sometimes it is not possible to repair old products and you have to replace them with new ones. Before purchasing new boards, you will have to understand the specifics of the purchase.

Size

When making sofa grilles, lamellas are used, which may differ in size. Therefore, before purchasing, you should familiarize yourself with the main types of such products:

1. Wide. These designs are purchased if you need to replace the slats on large sofas where bonnells with springs are installed. The width of such boards does not exceed seven centimeters.
2. Narrow. They are considered a universal material, as they are suitable for any mattress. Experts advise buying narrow slats for beds that have spring mattresses. This will increase the strength of the structure. The width of narrow lamella materials is 4-5 millimeters. The thickness of such planks is small and reaches only three millimeters.

Quantity

Having decided on the dimensions, you need to figure out the optimal number of slats. Some people don't know how many boards they need to buy to strengthen the base of the bed.

Experts recommend buying a lot of lamellas, since the strength of the product depends on this.

To determine the required number of slats, take into account the dimensions of the bed. For example, for double structures, at least thirty planks are purchased. For single beds, 15-20 pieces are enough. However, some manufacturers install more than thirty slats to make the sofa more elastic and resistant to stress.

Material

Most often, slats for sofas are made of wood. It is used to make adhesive plywood, which is laid in several layers to create a more durable surface. Products made from plywood are characterized by good elasticity and elasticity. The lamellas can also be made from the following materials:

1. Birch. Budget products are made from young birch trees. Such structures are not very durable and therefore are not recommended to be used.
2. Beech. To make more reliable bed bases, beech is often used. This wood is flexible and highly durable.

Sofa repair at home

Below we will look at the main problems that require repair work to restore the sofa.

Frame and transformation mechanism: step-by-step instructions

First of all, you need to check the condition of the sofa frame. To do this you will need to disassemble the structure.

Prices for popular models of screwdrivers

Step one: you need to disassemble the sofa, remove its upholstery and filling. After that, you should carefully remove dirt and dust that accumulate inside the structure over time. In some designs, the transformation mechanism is attached to the seat and back, and in this case there is no need to remove the upholstery.

Step two: now you need to inspect the condition of the frame beams. They are often deformed due to various impacts. If they are cracked or broken, it will be necessary to prepare the bars exactly to the size of the structure and install them. A cracked beam can be fixed using a metal angle and screws. As you can see in the photo, a fairly large number of fasteners will be required for the grip to be reliable.

We connect the parts of the beam with a corner

Step three: in some cases it becomes necessary to replace the plywood part of the sofa. The damage occurs because the springs push through the thin plywood.

Any cracked pieces of plywood will need to be removed.

Now we need to cut out a piece of plywood exactly to the size of the damaged part (in this case we use a diameter of 4 millimeters)

We prepare small bars and make holes in them for self-tapping screws

Now, using self-tapping screws and wooden blocks, you will need to secure the plywood part

Repair of the transformation mechanism will differ depending on its type:

Very often, budget versions of sofas are equipped with a roll-out mechanism

There are cases when the fittings of the transformation mechanism have not lost their original appearance, but the spring requires replacement. It usually becomes deformed when there is too much load on the sofa. If there are deformed parts in the design of the mechanism, they must be removed and replaced. Let's look at the repair process using a clear example.

Step one: remove the spring from the transformation mechanism.

The spring of the mechanism should be brought

Step two: now we need to disassemble the latch.

The disassembled latch looks like this:

Next, take the bolt and clamp it with a vice.

Now you can assemble the clamp

This is what the mechanism looks like after repair

Spring block repair: step-by-step instructions

During operation, it is the spring unit that often fails. It consists of twisted metal elements connected at the top and bottom. The first sign of a breakdown is a characteristic creak that can be heard when trying to sit on the sofa.

Important point! Restoration of the spring block is carried out by replacing the connecting parts.

Step one: in this case, you will have to remove the upholstery and all the soft part using a special tool called an anti-stapler.

Staple remover prices

Step two: now you need to determine the type of breakdown and fix it:

You can connect broken springs together using wire or a spring. In this case, a dowel was used as additional reinforcement.

"Naked" spring block

If, during operation, creaking is observed only in a certain place of the structure, then it makes sense to secure the lining between the metal elements. Of course, this is just a temporary measure, so if possible, the block will still have to be replaced.

Video - Spring block repair

Replacing filling and upholstery: step-by-step instructions

Over time, not only the frame elements and springs become unusable, but also the soft part of the sofa, and then it will also need to be replaced. We tell you how to do it correctly.

Step one: we need to evaluate the appearance of the fabric that is placed under and on top of the spring block - this can be either felt or batting. Thanks to the presence of such a lining, the springs will not push through the foam rubber and rest against the plywood parts. When dismantling old structures, craftsmen in most cases see the following picture. The batting layer has become deformed and lost its original appearance, so it will not be possible to leave it. Once you have removed this material, it is recommended to vacuum the structure to remove any remaining dust.

Step two: First, material should be placed under the spring block. It is not necessary to buy a new piece of fabric for such purposes, because you can even take an old, clean blanket.

We lay the fabric under the springs, and then secure the block to the frame

Step three: now we also have to put material on top of the spring block. We will use felt for such purposes. If this is not available, you can use unnecessary carpeting.

It is advisable to roll it in two layers, then cut it exactly according to the design parameters. Now we need to attach this material to the springs using a thick needle and thread (some craftsmen use an awl in such cases). Between stitches you should leave a step of 35 centimeters.

Attaching the material to the spring block

Step four: now we have to lay down the foam. If the old one looks normal, then you can leave it. Replacing foam rubber involves performing the following steps:

We carefully fix the foam rubber on our structure

Step five: now you need to put a padding polyester on top of the foam rubber; if necessary, it can be replaced with another soft material. As an alternative, you can use holofiber - this material is durable and has a long service life. The synthetic winterizer is also secured to the structure using brackets. At the same time, it is recommended to glue it to the foam rubber, because during use it can slip. Now the structure must be left for several hours until the glue has completely dried, and only then can you proceed to another stage.

Step six: we have to secure the upholstery fabric. You can use the old one if it looks normal. However, many craftsmen prefer to make new upholstery to update the sofa.

If you plan to use old upholstery, you will need to wash it.

At this stage we have to choose the material from which the upholstery will be made. To do this, we will look at the features of the most popular types.

Table 3. Types of upholstery

To cut out new upholstery, you need to remove the old covers, rip them apart at the seams, and then iron them, after which new upholstery should be made from them

Now we have to secure the upholstery on the sofa using a stapler. The fabric should be slightly stretched.

In order to preserve the upholstery of the sofa, it is recommended to sew a set of removable covers - they can be removed and washed at any time

Prices for sofa furniture fabric

How to repair and replace slats

At the initial stage of repair, it is necessary to get rid of damaged planks. They are carefully removed from the groove, moved to the side and removed from the structure. Some types of lamellas are attached using special holders. In this case, you will have to use pliers or a screwdriver.

Some people use a hammer, but it is not recommended to use it so as not to accidentally damage the structure.

If the slats are broken in the central part of the bed, you can swap them with the outer slats. This is done when one or two planks are broken. If more lamellas are broken, you will have to buy new ones. In this case, it is recommended to buy the same products as before. The purchased products are carefully attached to the bed using clamps. After installation, you need to check the reliability of the fastening and make sure that the slats are not loose.

How to repair a lifting mechanism with your own hands

Sometimes the bed lifting mechanism, which is responsible for transforming the structure, breaks along with the slats. The following signs indicate a breakdown:

• spontaneous lowering of the orthopedic base;
• jamming of the mechanism when lifting or lowering the structure;
• creaking and other extraneous sounds that occur during operation.

If one of the listed symptoms appears, it is necessary to disassemble the lifting mechanism. To do this, the mattress is removed from the bed, after which its base is unscrewed. Then the fasteners are unscrewed, with the help of which the mechanism is screwed to the structure. It is difficult to repair such a product yourself and therefore it is better to take it to a specialist who professionally repairs furniture.

Methods for restoring an old bed

If the bed is too old, you can restore it and make it look like new furniture. During the restoration process, it is necessary to carefully inspect the structure and identify parts that require replacement. Most often, the springs and mattress are changed during restoration. Sometimes people decide to replace worn side panels. To do this, you will have to purchase new panels that are suitable for the restored sofa. If the side parts are not very worn, you can sand them and varnish them. It is recommended to use varnish mixtures that have a mahogany tint.

Benefits of a homemade bed

Before deciding to make a folding bed yourself, you should consider the advantages and features of this design:

• the piece of furniture will have the desired shape, dimensions that will fit the dimensions of the room;
• You will independently monitor the quality of the elements used and assembly;
• this option is much cheaper than buying a finished product;
• a self-made folding bed can be placed anywhere;
• the construction does not require things that are difficult to find on sale.

Before deciding to make a folding bed yourself, you should consider the advantages and features of such a design.

When we purchase furniture in a store, it is difficult for us to assess how high quality and reliable it is. For this reason, it is safer to build it yourself using high-quality materials. This is only possible if you have the appropriate knowledge and skills.

When we purchase furniture in a store, it is difficult for us to assess how high quality and reliable it is.

How to cheaply and quickly make a cot from what you have on hand

Not everyone has nice and large apartments that can comfortably accommodate all guests and relatives. There are a lot of owners of small-sized apartments, so you have to come up with something and get compact sleeping places. In this case, a folding bed helps a lot.

A folding bed is a fairly compact and mobile item. It does not take up much free space and is easy to clean after use. If you do it yourself, you can create a unique item that will have no analogues anywhere. An extra bed can easily and happily accommodate overnight guests without compromising anyone’s comfort.

How long did the folding bed with Christina-M mattress last for me? How to fix a folding bed.

I decided to write about a folding bed. There are almost no such products in reviews. But in vain. Guests arrive, but there is nowhere to put them to sleep. I bought a folding bed with a Christina-M mattress in the spring, when there was still snow. Somehow I got it there; they didn’t unpack it in the store to make it easier to carry. They gave a 2 week guarantee, in case something goes wrong. And it stood idle for about a month. Then a guest came to see me and after the warranty they only tried out the folding bed.

I chose this folding bed because its headboard is adjustable and fixed on two stops. The store had folding beds that were stronger and more expensive, but without a headboard locking regulator.

And I liked the mattress in the Christina-M folding bed. That is, it is not so big and soft, but it is dense to the touch; there were worse ones in the store.

It broke on the 4th day (i.e. night) of use! The metal holders of the mattress and frame were falling out. Namely these springs.

And every night more fell out. My guest's weight is about 82-85 kg. Just now I looked at the user's weight of the clamshell in the instructions. It should be no more than 80 kg. It is written on the second sheet at the top.

Of course, I tried to put these springs back. And I pressed it with pliers - it was all useless, they fell out anyway and almost all of them had already fallen out. It was impossible to sleep on the folding bed - the bottom of the stretch fabric sank greatly.

It will be useful: How to choose the right mattress for a double bed

I started thinking about how to fix it. If you take a wire, clamp it on one side, make a hook and insert the hook into the frame, and on the other side clamp it in a circle. It won’t work again, the hook will fall out of the hole in the bed frame, just like these springs.

Then I decided to attach the mattress to the frame not through holes, but in a circle. For this I took bags from Magnet. I go there often, I buy fruits and vegetables, I pack them in bags, they are free, but I don’t throw away the bags, I put the garbage there, tie it up, put it in a general bag, and then just throw it away. There are a lot of packages accumulated. Using a knitting needle, I pushed the bag into the hole in the tension fabric to which the mattress was attached; the hole remained from the spring holders.

You just need to thread the bag through, grabbing the metal wire inside this tension fabric. It is hard, like a rod inside, located on the edge.

Then I wrapped it around the frame and tied it.

And so on wherever the springs fell out.

Then do the same on the other side of the mattress - I threaded the bag through it, pulled it on, wrapped it around the frame, and tied it.

Nothing fails anymore. You can sleep, although the tension has weakened a little, but the bags held up better than the springs.

If your folding bed is broken, don’t despair, maybe it can be fixed too, just like mine

Self-made furniture: what is the advantage and why is it so relevant today?

Furniture that you make yourself, as well as interior items and everyday things, fit harmoniously into the overall atmosphere of your home or life. In addition, any activity, including handicrafts, has a lot of positive aspects that you should always remember and pay attention to.

• Do-it-yourself things and objects have a huge number of significant advantages, which include the following nuances:
• The item is created in accordance with individual measurements and necessary parameters.
• Confidence in the reliability and safety of the material as it is chosen independently, which eliminates the content of toxic substances not specified by the manufacturer in the composition on the packaging.
• Art associated with the design and decoration of homemade objects promotes the development of thinking and also improves fine motor skills. Labor done by hand cultivates accuracy, patience and perseverance in a person.
• There is an opportunity to earn extra money by completing custom projects. There is such a thing as a handmade freelancer who can work from anywhere in the world and send finished work via mail.
• By involving your child in work, you can develop his communication skills and increase his self-confidence.
• Self-assembly of products promotes the development of creative skills and develops personality in every possible way. Such work does not get boring and almost never turns into a routine.

Naturally, there are also disadvantages to working on creating products yourself - the cost of raw materials. Sometimes, they can be expensive, which undoubtedly puts a strain on the family budget. In addition, you should prepare for the time investment and show a high degree of perseverance and patience.

How to make a folding bed yourself?

First you need to decide on the materials and decide in advance what it will consist of: it could be wood, metal, MDF boards. Cots made from the latter option are the most economical way to create additional space. In addition, MDF boards are easy to work with.

Tools you will need: pencil, tape measure, circular saw, grinding angle, drills, sandpaper, safety glasses. First you need to take two boards that will match the length of the mattress. Cut the boards to the required size - in the future they will be sides. The crossbars are connected to the load-bearing ones.

Then the back wall is connected, a shelf is made to attach the base. It must be secured inside the box itself. The final stage will be creating a frame for the mattress. It will be attached from the middle of its bottom. During work, two end boards and two side boards are taken. Using self-tapping screws, you need to make some kind of folds in advance. After all these manipulations, the frame must be assembled and the bottom, consisting of a sheet of plywood, must be nailed.

The supports are made from timber. The unfolding and folding mechanism is selected at your discretion.