Re-upholstery technology at home
In many other cases, reupholstering a sofa at home is not difficult.
It is only important to adhere to the correct technology and carry out the work in stages:
- disassembling the upholstery item into individual elements;
- removing upholstery from parts;
- creating patterns for new upholstery material;
- securing the cut upholstery to specific parts of the sofa;
- assembly of an updated design.
Five correctly and consistently performed reupholstery stages will allow you to complete the job efficiently and inexpensively.
And to make sure everything works out perfectly, let’s look at each of them in more detail.
Disassembling furniture into separate parts
Disassembling a sofa element by element is, of course, much easier than putting them back together later. But even at this stage you cannot do without attention and patience. First of all, you need to stock up on the right tool.
A screwdriver, screwdriver and pliers are suitable for these purposes.
The first thing to do is to disconnect the sides of the sofa. Next comes the turn of overhead elements (if any) - backrests, seats.
You should work slowly, very carefully and patiently, so as not to damage the structure itself.
Modern furniture is manufactured taking into account high maintainability, so problems should not arise at this stage.
It is advisable to put all removed fasteners (bolts, nuts, screws, etc.) in one place.
Removing old upholstery from disassembled furniture
Worn fabric is removed carefully
The fastening brackets are carefully removed, and the material should be kept intact, since these are the parts that will serve for new patterns
The next step is to inspect the metal parts that follow the filler to detect possible defects.
Springs must be checked very carefully, since subsequently, an overlooked defect can cause a lot of trouble.
Sometimes manufacturers install mesh or belts instead. It's better to replace them with new ones.
Cut out new upholstery
The quality of the sofa upholstery will largely depend on the correctly cut parts. Therefore, you should leave the old fabric, since it will be much easier to cut a new pattern using it.
And while it’s easy to reupholster an ordinary sofa, a corner model will require more attention and work.
The technology for creating a pattern is not as complicated as it seems at first. It is necessary to measure the parameters of each individual surface: width, length, height.
You need to mark the fabric with chalk, on level ground, making sure to add a few centimeters to the hem on each side. The finished part is cut out strictly along the outlined lines.
Attaching new fabric
We place the prepared fabric on the desired surface, turn in the edges and secure it to a wooden frame using nails specially designed for furniture or construction staples.
In this case, you will need to stretch the material evenly over the parts of the sofa, otherwise nothing will work. The staples should be approximately 3-4 cm apart from each other.
Initial strengthening of the tissue on the sides will help make the task easier. This way it's not difficult to do everything.
When reupholstering a sofa at home, it is difficult to avoid mistakes and, as a rule, the most common is incorrect calculation of the material.
And this, as you understand, leads to the main, sudden problem - a lack of fabric. Objections that it is easy to purchase are not justified.
No one can guarantee that you can find exactly the same shade. There is only one conclusion - you need to buy fabric with a reserve.
Even if there is plenty left, there is always the opportunity to sew another sofa cushion or cover a stool.
Final assembly
At the final stage of reupholstering a sofa at home, you need to once again carefully examine the updated details of the sofa and remember what it looked like at the beginning.
All elements are laid out in order of assembly and the final assembly of the structure begins.
Work carefully and carefully, using retained fastening tools.
The video in our article will tell you about the correct connection of the parts of both a simple and a corner sofa, by watching which you will not make mistakes and will do everything correctly.
How to disassemble a corner sofa?
View instructions on how to assemble a Malt wall...
How to assemble a sofa Soft from A lot of furniture sofa assembly diagram Soft
Diagram and instructions for assembling the Soft sofa from Much Furniture. View instructions on how to assemble a Soft sofa...
How to assemble a Monaco corner sofa from A lot of furniture, assembly diagram for a Monaco corner sofa
Diagram and instructions for assembling the Monaco corner sofa from A lot of furniture. View instructions on how to assemble...
How to assemble a Martin sofa from A Lot of Furniture, Martin sofa assembly diagram
Diagram and instructions for assembling a Martin sofa from Much Furniture. View instructions on how to assemble a Martin sofa...
How to assemble a Malibu sofa from A Lot of Furniture, assembly diagram for a Malibu sofa
Diagram and instructions for assembling a Malibu sofa from Much Furniture. View instructions on how to assemble a Malibu sofa...
How to assemble a Madrid sofa from Lots of Furniture, Madrid sofa assembly diagram
Diagram and instructions for assembling the Madrid sofa from Much Furniture. View instructions on how to assemble the Madrid sofa...
How to assemble a Colombo sofa from A Lot of Furniture, assembly diagram for a Colombo sofa
Diagram and instructions for assembling the Colombo sofa from Much Furniture. View instructions on how to assemble the Kolom sofa...
How to assemble a Dubai sofa from Lots of Furniture, Dubai sofa assembly diagram
Diagram and instructions for assembling a sofa Dubai from Much Furniture. View instructions on how to assemble a Dubai sofa...
Instructions for assembling the Verona wall from Much Furniture
Diagram and instructions for assembling the Verona wall from A lot of furniture. View instructions on how to assemble the Veron wall...
How to assemble a Bristol corner sofa from A lot of furniture, assembly diagram for a Bristol corner sofa
Diagram and instructions for assembling a Bristol corner sofa from A lot of furniture. View instructions on how to assemble...
How to assemble a Berg sofa from A lot of furniture, assembly diagram for a Berg sofa
Diagram and instructions for assembling a Berg sofa from A lot of furniture. View instructions on how to assemble a Berg sofa...
How to assemble an Atlanta corner sofa from A lot of furniture, Atlanta sofa assembly diagram
Diagram and instructions for assembling an Atlanta corner sofa from A lot of furniture. View instructions on how to assemble...
How to assemble an Atlanta sofa direct from A lot of furniture Atlanta sofa assembly diagram
Diagram and instructions for assembling the Atlanta sofa direct from A lot of furniture. Find out how to assemble an Atlanta sofa from...
Characteristics
Upholstery types are represented by two main materials: eco-leather and textiles.
The built-in side table and wide armrest on the other side allow you to comfortably place all the necessary things, be it a laptop or a cup of hot coffee. And its angle can be changed depending on the layout of the room. When assembled, this piece of furniture has a length of just over 2.5 m, and when unfolded, it turns into a comfortable double bed.
The combination of all these features makes many buyers choose the Atlanta model.
Professional furniture assemblers will deliver and assemble it in the shortest possible time. But if you decide to assemble the sofa yourself, then the assembly instructions included with each product will help, in which everything is written and illustrated in detail. In addition, if you decide to assemble it yourself, find visual photo and video examples that will allow you to understand exactly how to assemble the Atlanta sofa yourself with a direct modification.
Stages of work taking into account the model
Step-by-step instructions for dismantling upholstered furniture depend on the design of the product. Domestic sofas come in two types - straight and corner.
The first option is a rectangular product with a horizontally oriented seat and a vertical backrest. Popular transformation mechanisms are a book, a Eurobook, an accordion.
The second model has the shape of the letter L or P, and unfolds as follows: if you pull the lower part of the seat, it moves out and the berth increases. Taking into account these features, these two varieties require an individual approach when dismantling.
Straight
Before disassembling sofas for transportation, the furniture is folded and carefully inspected from behind.
If the fastener is hidden under the upholstery, you must carefully remove the edges of the fabric. Use a flathead screwdriver to remove staples, nails and other parts
Then you need to:
- Place the seat in an upright position and place it on the backrest.
- Unscrew the sides if there are fasteners on them.
- Remove the fittings used to secure the seat.
- Remove the backrest latches.
The easiest way to disassemble a product with a Eurobook transformation mechanism. In this model, the back and seat are a single monolithic block. You just need to remove the sides and disconnect the lower part, which slides out on wheels.
When preparing to transport a disassembled accordion sofa, you need to carefully remove the headboard and roll out the triple frame on the box. To do this, the seat is raised and the fasteners connecting it to the rest of the structure are unscrewed. For some models, the box is fixed using clamps; in this case, they are removed.
As a result, the sofa needs to be disassembled into three parts: paired sidewalls, a folded transformation mechanism and a pull-out laundry box. The last stage of work is the dismantling of the legs equipped with rollers.
It is advisable to fold them, like the sidewalls, in pairs.
Angular
Before disassembling the sofa, it is necessary to free the furniture from the protective cover and put the pillows away so that dust and dirt do not get on them during work
After this, the product is carefully rolled out into the middle of the room so that it can be freely approached from any side
Next, the seat is raised so that the internal frame is visible. Then you need to:
- Unscrew the side parts.
- Separate the corner element from the short and long ones.
- Remove soft parts.
- If the short part has a back, unscrew it.
- Remove the bedding drawer.
If the sofa is disassembled for moving and not for repair, each part is separately packaged in polyethylene. Both sides are laid together. After this, the product can be easily transported. If the sofa was disassembled with the upholstery removed, it can be returned to its place using a construction stapler.
Some luxury models have polished wood armrests. In this case, they must be protected from mechanical damage using corrugated cardboard, which is secured with construction tape.
Thus, the design of a corner sofa for transportation is quite simple. During the work process, the master will need a flat-head screwdriver and several open-end wrenches.
To remove branded fasteners, it is better to contact a specialist. It is advisable to transport the corner only in disassembled form, since due to the design features, sofas of this type often get stuck in doorways, especially on narrow staircases.
Corner sofa frame
Corner sofas are a type of upholstered furniture in which several independent elements are structurally combined. This is a rigid base and an upper part made of elastic materials.
The frame of the corner sofa has a configuration in which two fragments are connected at right angles: the base of the frame and its auxiliary side part. The base is twice as long: its standard dimensions correspond to 1.8 m. The auxiliary part is usually rigidly connected to the base using special fasteners. This gives the structure the necessary strength and stability.
Less common are models in which such fastening is absent and the corner part of the sofa has an autonomous design. Autonomy allows it to be placed on both the right and left sides of the base.
The frame consists of longitudinal and side panels
They bear the maximum load, so special attention must be paid to the quality of manufacture of these frame fragments. Panels are made from hard wood
Beech is best suited for this purpose, although economy-class models can use pine and wood-based materials. Metal frames are less common; they make the structure heavier and double the cost of the sofa.
A corner sofa with a frame made of chipboard is not the best choice, but if it is still made, you need to make sure that the raw materials for making the base do not contain toxic compounds and are safe for health. Information about this can be confirmed by a product quality certificate. The external sign by which it is determined visually is the lamination of the surface or its finishing with wood veneer.
Corner sofa: nuances of dismantling
Corner sofas are more bulky than wall sofas. In addition, they are structurally more complex, which means that more effort will be required to disassemble such a model. What is a corner option? These are two full-fledged sleeping places that are connected by a corner element. Some sofas have one side smaller than the other. The backs and seats can be removable cushions or combined into a single block of non-separable design. An additional element is sometimes a drawer for bedding built into the side element. As you can see, there are many options, and each requires a separate answer to the question of how to disassemble a corner sofa.
Here the parsing process looks like this:
- First, remove the side panels, if they are provided for in the design.
- First removes the seat and then the back from the short part of the sofa.
- The main part has a removable linen drawer.
- What remains is a corner element, small in size and easily passing even through narrow doorways.
Back to Contents
Recommendations
In order to avoid damaging the structure during the move, you should take into account some recommendations from specialists. Expensive sofas are often equipped with branded fasteners
To disassemble it, special tools are required, otherwise there is a possibility of damaging the upholstery or frame.
You should not try to disassemble such mechanisms yourself; it is better to seek help from professional craftsmen.
Caution also applies to individual models. The accordion mechanism often has special clamps in its design.
Removing the laundry storage box can be difficult. In the “book” and “eurobook” models, it is recommended to tighten the nuts onto the bolts immediately after dismantling.
There are a lot of these elements, they are very easily lost. In a corner folding sofa, it is the corner block that deserves attention.
It is non-removable, so it should be left in its original condition.
During debriefing, many problems arise after severe physical force is applied. This is strictly prohibited.
This is especially common if a compact folding mini-sofa is disassembled. All items are carefully stored in a specially prepared place so as not to lose them when moving.
This will help you quickly assemble the sofa in the new room.
When disassembling furniture with an old base, several nuances should also be taken into account. Repairing chipboard is more difficult compared to a sofa with a wooden frame. A lot depends on the condition of the frame.
Expert opinion Ekaterina Anatolyevna Smirnova has been engaged in interior design for 7 years, a professional architect
It is also important to take into account the age of the structure, since over time the fastenings will fit closer and closer to each other. Disassembling corner models can be more difficult compared to straight ones
During transportation, care must be taken to ensure that no moisture gets on the elements.
It is best to use a polymer film that is impermeable to water; it will hide the parts from unwanted exposure.
Caution is also required when working with draw-out models. This is especially true for families with pets.
Therefore, before you return the built-in compartment for storing bed linen to its place, it is worth checking that your pet will not hide in it. If this is not done, the animal may be injured.
When disassembling, not only the structure itself deserves attention, but also its dimensions, transformation mechanisms and material of manufacture. Experts recommend using only tools that are suitable for working with a specific model.
It is important to follow the dismantling sequence. If all conditions are met, there will be no problems during the work, and the product will be very easy to assemble in a new place
Using the example of assembling an accordion sofa, you can easily disassemble this model for transportation. All the details are in the video below.
Mechanism repair
If during operation the back or seat does not fold or this happens with great effort, or they are skewed relative to each other, then repair of the mechanism for transforming the sofa-book is required.
The extent of the problem can only be discovered after disassembling the product. To do this, you first need to remove the armrests (most often they are secured with two bolts); in order to dismantle the moving parts, you need to unscrew the fasteners in the mechanism itself.
The system is now fully visible, but still attached to the sofa frame. If all components are intact, there is no play or other signs of loosening, you can simply lubricate it and lift the fastening bolt. Even the presence of rust does not mean complete failure. You can get rid of it using special chemicals.
If the rivets that connect the moving elements of the sofa-book mechanism break, they can be easily replaced with others. Before this, you should remove the mechanism, clean it, get rid of broken parts and install a replacement.
In extreme cases, especially when the sofa book has been in use for many years, the entire mechanism will have to be replaced. The design is easy to purchase at any furniture store at an affordable price.
A special feature of the Eurobook sofa is the presence of a double transformation mechanism, one part of which allows you to move the seat forward, the second lowers the backrest into the resulting space. Repair or replacement is carried out similarly to the case considered, with one difference: the retractable mechanism is equipped with bearings, which break most often. They will need to be replaced.
The click-klyak model has a base made of a metal frame to which all the moving elements and slats are attached. If there are problems with folding out or 1 rail is broken, you will first have to remove the upholstery, conduct a detailed inspection followed by repair work (replacing fasteners, broken slats, lubricating moving elements).
Step-by-step guide on how to disassemble a sofa for transport
If you decide to disassemble the sofa yourself, follow these instructions:
- We move the furniture to the middle of the room and remove the soft cover. Take the key and unscrew the screws from the back panel. We move the sidewalls away from the main body. They will need to be packaged separately.
- We take the headboard out of the grooves and take out the triple section.
- We unscrew the fasteners and remove the housing from the structure. Newer models are equipped with clamps rather than fasteners. You just need to carefully remove them and that’s it. The box can be removed.
After disassembly, you should have three parts: two sidewalls, a laundry box, and a metal body with a mattress.
Each part must be packaged separately in film or bag. We secure moving parts tightly with tape so as not to damage them during transportation. All removed screws, fasteners, and clamps should be placed in a separate box so as not to be lost.
If necessary, you can detach the mattress from the frame. However, in most cases, this is a waste of time, since the product can be easily moved even in such disassembly.
Furniture should be transported in packaging so that the parts are not damaged. All parts must be handled carefully so as not to damage the appearance. Assembling the sofa is also done sequentially
It is important not to lose small parts, since if they are missing, the furniture may not be put back together
How to disassemble a roll-out sofa
One of the most popular options is a roll-out sofa. It is very easy to use and quite durable due to the absence of complex transformation elements in the design. It will not be difficult to disassemble such a model:
- We remove pillows and covers if necessary to get to the fasteners.
- We move the sofa to the middle of the room to provide access to its back panel (for roll-out models, the back is a static element).
- Remove the side panels with armrests.
- If the transformation mechanism and the roll-out part are a single unit, then only the back is removed.
For those who do not know how to disassemble a roll-out sofa, we offer the services of professional craftsmen. They will quickly and carefully disassemble the structure and help you assemble the furniture in a new place.
Back to Contents
What is the assembly diagram for a corner sofa?
With their help, the backrest is moved to a horizontal position and, together with the seat, forms a flat, comfortable sleeping place.
The mechanism, called the “pantograph” or “tick-tock”, is designed on the same principle, but slightly improved. When unfolding the sofa, you do not have to move it away if it is installed close to the wall.
The roll-out mechanism is regarded as an acceptable, but not ideal option for corner sofas. When transforming upholstered furniture with such a device, the sleeping place turns out to be slightly lower than usual, which is not very convenient.
Sofas that use a roller mechanism are easier and simpler to unfold, thanks to which the lower part of the sofa can be rolled out without much effort. It is known by the code name "dolphin".
“Folding sofas” are models more suitable for a short rest. They can also be used for nighttime sleep, but only occasionally. The folding mechanism, which in this type of furniture can be presented in “English” and “French” versions, is not very durable, since it is not intended for frequent transformation of furniture.
The same deficiency is observed in the melarate and sedaflex mechanisms. They are acceptable in office corner sofas and furniture intended for guests. With constant use for sleeping, the design quickly breaks down.
Of the expensive models, corner “hypertransformers” are popular, in which almost all structural elements can change the position: the back easily moves into a reclining position, the side parts are transferred to an inclined or horizontal plane, and a comfortable footrest extends out at the base. Such sofas may include pull-out minibars, stand tables and linen drawers.
When purchasing a corner sofa, be sure to check the folding mechanism. If there are doubts about its functional merits, it is recommended to choose another, more reliable model.
Characteristics of the sofa "Monaco"
The “Monaco” sofa has a corner design, which is convenient in terms of use, thanks to which it will easily fit into any room. The sofa looks original in design. The armrests have built-in shelves on which you can place various accessories, or use them as magazines. The sofa, in addition to its main function, can be used as a sleeping place. To make it convenient to unfold, manufacturers install a reliable mechanism. It is built into the sliding part, so there should be no questions about how to assemble the Monaco sofa. Furniture from this series can harmoniously fit into any interior, because various coating options are used.
Transportation rules
An important point when transporting furniture is to prevent it from moving freely in the back of the car. To do this, you need to secure it with a rope or stops. To avoid accidental staining, lay it down with cardboard. Try to initially place the overall part in the body of the vehicle, and the sidewalls and blocks can be placed nearby as stops. It is better to put pillows and other small items on top. It is advisable to use freight transport for transportation, but in order to save money, you can transport it in your own passenger car. To do this you will need a roof rack and a large interior. The main part of the sofa can be secured on top; before doing this, it is advisable to pack it well; it is better to transport small parts in the cabin and rear trunk.
How to disassemble a corner sofa
If a rearrangement is planned, it is enough to simply disconnect the blocks, move them to the right place and connect them back.
Required Tools
To disassemble the corner sofa you will need:
- A screwdriver (preferably several, depending on the type, flat and Phillips).
- Pliers (large and small).
- Wrenches (preferably a complete set for disassembling the fastening)
- Furniture stapler (sometimes the fastener is hidden under the back upholstery; it will have to be unfastened and reattached).
- Screwdriver (with a set of bits).
- Level (if it is necessary to secure the roller guides).
- Packaging material (thick polyethylene, large and small bags).
- Scotch.
We disassemble the sofa for transportation correctly
Further disassembly depends on the type of furniture. There is a mechanism inside the structure. There are several types of mechanisms; they are different in their design and operating principle, but this does not particularly affect disassembly. If there are side backs, they must be separated using a wrench or pliers. The fastener itself is located inside the part of the sofa with the back. It is enough to simply unscrew the nut on the fastener bolt inside the block and separate the backrest; often there are two such fasteners.
The main transformation mechanism may be hidden under the upholstery - it must be unfastened with a screwdriver. You should unscrew the mechanism from the walls of the furniture; for transportation, it is enough to disconnect only one side of the mechanism’s attachment to the walls on both sides of the sofa. If you are afraid of damaging the furniture or the mechanism itself, it is better to turn to professionals; this can save time and sometimes money on buying a new sofa.
In rare cases, there is simply no mechanism; instead there is a roller system, due to which this structure moves apart. In this case, it is necessary to extend the sofa and remove the roll-out part of the sofa from the roller guides. Next, unscrew the roller guides and disconnect the stopper, if any, these can be pieces of thick fabric attached to the back of the roll-out part.
In the additional block of the sofa, there are sections for linen; such a block can be disassembled by lifting the seat and removing it from the fastening loops. In the future, the fastenings with hinges and the back of the block can be unscrewed.
All parts should be packed in separate bags and secured with tape to the part of the sofa for which they were intended, so as not to later confuse which parts go where. Dimensional elements should be packed in thick polyethylene or cardboard to prevent damage when taken out of the house and further transported. It is advisable to wrap sharp edges of parts with cloth.
Assembly diagram of the sofa "Monaco"
Buyers who purchased a sofa without assembly services may have questions about the order in which it should be done. The instructions for assembling the sofa “Monaco” (“Lots of furniture”) have step-by-step actions. She details the sequential steps you need to take to assemble your sofa. Installation of the product is quite simple. When disassembled, the “Monaco” sofa has the following elements:
- main part;
- corner part;
- sliding part;
- back;
- two armrests.
The first step is to install supports on the main, corner parts and armrests. Rollers should be screwed to the sliding part. Then you need to use European screws to connect the armrest to the corner section. It is necessary to check that all elements are tightly secured to each other. The next step is to connect the main part with the back and the second armrest. After these steps, the resulting structures should be connected to each other, fixing the back wall with the armrests, after which it is necessary to tighten all the European screws to tightly fix the elements.
Next, you need to install a sliding one on the guides of the main part. This completes the assembly of the corner sofa. The instructions for assembling the sofa “Monaco” (“Lots of furniture”) contain a detailed description. After familiarizing yourself with it and reading this article, sofa owners should not have any questions about self-assembly.
Source
Disassembling a corner sofa: a convenient way for transportation
One of the rules for a competent move is: “Disassemble everything that can be disassembled!” This is especially true for bulky, oversized furniture, including a corner sofa.
It is very difficult to carry and transport it undisassembled. It takes up almost all the space in the car body and does not fit into the elevator car.
Therefore, the question of how to disassemble a corner sofa for transportation should concern everyone who is the proud owner of such furniture.
Modern corner sofas come in two varieties:
- With double or triple block and corner connection;
- With a perpendicular sofa for two or three seats.
In turn, sofas are divided according to the transformation mechanism. It could be “Accordion”, “Dolphin”, the popular “Euro-book” or “American folding book”. The process of disassembling them is almost identical, but with its own nuances.
Before the disassembly process, we recommend preparing a flat-head screwdriver, open-end wrenches (10, 12-14), stretch film and corrugated cardboard for packaging, as well as a strong bag for fasteners.
Scheme for disassembling a corner sofa
- We move the sofa to the middle of the room or at least move it as far away from the wall as possible.
- We remove pillows and covers.
- To access the inner frame, lift the seats. Inspect the fastening mechanism. If it is covered with upholstery and it is fixed with furniture staples, then it is better for a specialist to disassemble and assemble such a sofa. Here you will need a special furniture gun.
- Remove the sides and trim from the back of the sofa.
- We disconnect the short part of the sofa from the long one, from the corner fastening.
- We unscrew all the fasteners that are on the short seat.
- We try to remove the backrests (some models have this option).
- We detach the linen drawer from the main part of the sofa, the rest remains non-detachable.
- We pack all the elements of the sofa in stretch film, cover it with corrugated cardboard and secure it with tape so that the parts are not damaged in the car. We put the fasteners in a strong bag, tie them and label them!
Transformation mechanism
The choice of the type of sofa, which can be folding or non-folding, also plays a big role. When choosing the first type, you need to decide how the sofa will be laid out. There are 3 such methods in total:
- “Eurobook”;
- "Pantograph";
- "Dolphin".
We disassemble the Eurobook sofa
Analysis of the Eurobook sofa
Sofas that fold out using the Eurobook method require constant moving away from the wall during the folding process. Therefore, if you want to place the sofa close to the wall, then it is better to take a closer look at the second option (“Pantograph”). However, sofas of this type have a rather low seating position, which is not suitable for every person.
Dismantling the Pantograph sofa
Disassembling a sofa pantograph
Related links: Choosing a pillow for a good sleep - 5 main criteria
Dismantling the Dolphin sofa
Sofas that fold out according to the “Dolphin” principle are equipped with casters, thanks to which they can be easily transformed. However, their cost is slightly higher than other sofas.
In the end, it is worth saying that a corner sofa will look attractive and appropriate only if it is chosen correctly. Therefore, the choice of a specific model must be approached with complete seriousness.
Transportation principles
Upholstered furniture is very comfortable for relaxation, but moving it will require a lot of effort.
When buying a sofa or moving, transportation is an important and responsible step, so in order to avoid mistakes and keep the furniture in working condition, you need to follow certain rules.
A good option is to hire transportation specialists who can handle this quickly and professionally. But if funds do not allow, you need to rely only on your own strength.
Narrow doorways and corridors will only allow you to carry a disassembled sofa. Therefore, it will need to be disassembled and then reassembled in a new location. For this, the assembly diagram for this model is useful, which is always included with the purchased furniture. But if the purchase was a long time ago, and all the instructions are lost, you will need to disassemble the sofa, marking every detail, and, if possible, photographing the process.
Carefully pack all parts in bubble wrap and carefully place them in the trunk of your car or van. To easily transport a disassembled sofa in a spacious van, you need to secure the parts so that they cannot move around the car. After transporting and unpacking furniture, you should not delay its assembly for long.
How to disassemble an Atlanta corner sofa with a lot of furniture
Disassembling a corner sofa for transportation.
A corner sofa is a bulky structure that cannot be transported when assembled. Disassembling upholstered furniture into individual elements simplifies loading and unloading, allows you to compactly place the cargo in the back of a car for transportation, and also helps protect it from accidental damage. To protect parts of upholstered furniture from moisture, dust, snags and abrasions, they are wrapped with stretch film. If the armrests are made using polished wood, they are protected with corrugated cardboard or thin rolled polymer foam, securing the protection with tape. Design features. Corner sofas vary in design. We can distinguish: models consisting of a three-seater and a two-seater block, connected by a corner element, models consisting of a three-seater or two-seater block with a perpendicularly located “sofa”.
The seats and backrests are either solid blocks or individual cushions. The presence and configuration of the sidewalls and the presence of a linen drawer vary. The transformation mechanism of the main part depends on the sofa model, first of all it is: If the short part is made in the form of a sofa, it is equipped with a mechanism for lifting the seat, under which there is a box for linen.
Disassembly principle. Remove cushions, covers, move furniture away from the wall, and pull out or lift the seat to gain access to the inside of the support frame. If the short section of the sofa is a sofa, it should be raised. Pay attention to the type of fasteners. They may require the use of special tools - in this case it is recommended to turn to professionals.
The help of specialists will also be needed in a situation where the fastening points are hidden by the upholstery - it must be carefully removed by removing the staples, and after assembly, fastened back using a furniture gun. To disassemble upholstered furniture on your own you will need: open-end wrenches (10, 12-14), a flat-head screwdriver. At the first stage of disassembly, the side panels are removed (for some models it is necessary to remove the tension strip from the back of the sofa). Next, you need to disconnect the short part of the seat from the long one, or the long and short part from the corner element.
Inspect the short element - if there are fasteners connecting the seat to the frame, unscrew the nuts and remove the soft part. If the short part has a back, it is also dismantled. The corner element may not be dismountable. The principle of disassembling the main part of the sofa depends on the transformation mechanism.
dismantling the Atlanta sofa for repair
In modern sofas, only the linen drawer is usually detached - the seat and back with a transformation mechanism form a unit that must be professionally disassembled only in extreme cases. Each element of the disassembled corner sofa is packaged separately (the sides are in pairs). The non-separable seat and backrest are pressed tightly against each other as far as the mechanism allows, wrapped in film and secured with tape.
Place the fasteners in a separate signed package. You can order a sofa transportation service from us, at the Sofa Repair company.
see also
Detailed instructions for assembling the Atlanta corner sofa. Atlanta corner sofa is one of the most popular models of corner sofas. Made from...
Detailed instructions for assembling the Atlanta corner sofa. Atlanta corner sofa is one of the most popular models of corner sofas. Made from...
Sofa "Atlanta" (Lots of furniture) - reviews. Negative reviews. I beg you people, don’t believe in good reviews, this is advertising. DO NOT buy anything from this store...
Fillers for the backs and seats of corner sofas
This also applies to the soft fragments that make up the upper part of the sofa. The back and seats should be comfortable, not cause discomfort in the sitting position and have sufficient elasticity.
The filler for walls and seats is most often polyurethane foam. It has a cellular structure, holds its shape well, and is elastic. Dense polyurethane is used for the backs and sides of upholstered furniture; softer material is used for seats.
Expensive premium models use not synthetic, but natural filler - latex, which is produced by foaming rubber. Latex corner sofas have pronounced orthopedic properties, allow air to pass through well, and do not cause allergic reactions. The cost of furniture with natural filling is high, but comfort always costs a lot of money.
Popular universal models often use spring blocks: inexpensive dependent Bonnell type and more expensive independent Pocket Springs.
In Bonnel blocks, the springs are fastened together, which leads to rolling if people of different weights sit on the sofa. Independent blocks consist of springs placed in special bags. A sofa with such a filling sag only in the place where a person sits, and this does not create inconvenience for the person sitting next to him.
Despite the obvious advantages of sofas with independent spring blocks, due to their high price, they are not in great demand among the average buyer.
Easy assembly process
Before connecting the main and side parts, screw the legs and loosen the screws holding the gas lift mechanism above the linen drawer. We assemble the furniture completely, starting with attaching the side frames, after which you need to connect the straight part with the dolphin mechanism and the side ottoman. Self-tapping screws will help with this.
Instructions for assembling the Atlanta corner sofa are contained in the videos, and you can also find photos with a detailed description of the process.
You can swap the table and armrest by changing the angle of the Atlanta corner sofa in the same way, although the sofa itself will have to be disassembled first.
The process of assembling the Atlanta model sofa is not complicated and even a novice craftsman can do it. And the excellent quality of the materials used in its construction and upholstery guarantees that, subject to operating conditions, this piece of furniture will delight its owners for a long time.
This model also has a direct modification. This option has a smaller sleeping area and is perfect, when assembled, for small rooms. If you bought an Atlanta straight sofa and are interested in how to assemble it, watch the video tutorial, which explains in detail all the stages of work.
“Everyone is in crisis, but we have beauty!” Transformation of a Soviet sofa.
One of my good friends decided to renovate this summer, and besides, the old furniture clearly needed replacement. There was money for repairs, but not for furniture. But when I came to visit her, in addition to stylish wallpaper and beautiful tiles in the kitchen, I saw a beautiful new sofa. Knowing that she did not purchase new furniture, I asked Tatyana where she got this sofa from. Her answer delighted and inspired me at the same time.
DIY furniture refurbishment
Tanya made this sofa herself, with her own hands, from an old Soviet ruin that she found in her grandmother’s attic at the dacha. The whole rework took her 3 days. She bought the material for upholstering the sofa at sale prices, so the designer color was determined by the crisis price.
This is what her old sofa looked like.
Before starting the alteration, you need to unwind this monster into its component parts, remembering what is screwed where and how.
And this is what one of the fastening elements looks like.
We completely disassemble the sofa.
We number all the parts from the old sofa, except for the upholstery. We will replace the old upholstery with new and beautiful ones.
Then remove the upholstery from the sides.
Now we need to sew the covers on the sidewalls and put them in place, having first wrapped the sides with padding polyester.
This photo shows the intermediate result.
After we have both sidewalls ready, we move on to remaking the main body of the sofa.
Next, we move on to preparing a “sandwich” from foam rubber, padding polyester and a piece of fabric for one of the sofa blocks. There are three of them in total.
This is what the work process looks like.
We need to perform these actions three times.
But the “beauty” was in the third block.
We naturally send such old items to the trash.
Then we sand the wooden parts of the sofa, repair and put in order some of the plywood parts that have been dented over time.
After the wooden parts are ready, we move on to creating the soft layers of the sofa.
We continue to act according to the previously developed plan: fabric, foam rubber, padding polyester, stapler, staples, hammer.
This is what the process of attaching foam rubber and padding polyester looks like.
After strengthening the soft layers of the sofa, we move on to upholstery fabric.
Then we proceed directly to the actual assembly of the sofa.
We fasten all the details of the future updated upholstered furniture.
Voila, our sofa is completely ready!
Before you begin removing old upholstery and trim, you should inspect the exterior woodwork of the sofa. If any damage or defects occur on them, they must be eliminated. Moreover, when minor damage is caused, this can be done without even disassembling the furniture.
For more serious damage, such as chips and cracks, you will need to purchase wood putty from a hardware store that matches the tone of the furniture and carefully apply it in small portions to the damaged area.
You see what can be made from a Soviet-era sofa if you have a certain amount of time, materials and desire. Remodeling a sofa with your own hands will require less financial outlay from you, will allow you to preserve your favorite item, and in addition, will give you the opportunity to use your imagination and make the item truly unique. I also suggest that you get inspired by 27 more ideas on how to remake old furniture, after which you will definitely decide to remodel.
Click “Like” and receive only the best posts on Facebook ↓
When is instruction still needed?
Even if you ordered professional assembly, this article may be useful if you need a sofa repair: perhaps you have changed the interior of the room and need to reupholster the furniture, because the old upholstery now simply does not fit into the new color scheme, and the sofa itself is so good , that it is a pity to change it to a new one. In this case, repeat all the steps in reverse order, remove the old covers and, using their samples, cut out new ones, secure them using a construction stapler.
Source
How to disassemble an accordion sofa for transportation
The Accordion sofa is one of the most popular models of upholstered furniture.
It is easy to use and fits harmoniously into any interior. However, when moving to another apartment/house, the question often arises of how to transport a sofa yourself, so as not to hire special companies for transportation. In order for the transportation to be successful and the product not to be damaged, it is necessary to follow certain rules for disassembling furniture and transportation. Furniture can be damaged in an elevator or stairwell. Therefore, before carrying it, it is best to wrap the sofa with regular film or fabric. Moving parts are fixed, as they can be damaged when moving. Approach the process responsibly, since the appearance of the furniture and its suitability in the future will depend on the actions taken. If the product is incorrectly disassembled or the structure is damaged, the model will not be suitable for use.
How to assemble a corner sofa?
join the discussion
Share with your friends
Assembling furniture is a process that can be entrusted to specialists, or you can do it yourself. You can independently assemble structures of any type. This applies not only to cabinets, tables and bedside tables, but also to upholstered furniture, namely sofas. In this article we will look in detail at how you can assemble a corner model of upholstered furniture with your own hands.
